Jump to content
SAU Community

Recommended Posts

My R32 gt-r is fitted with Apexi twin pods.

They are due for a replacement as they are very dirty.

I don't see much benefit in them as I believe they just suck in all the hot air from the engine and would much rather prefer a standard (modified???) panel filter box as per the way the GT-r must have come in stock form.

Should I go down this path? or should I invest in building/buying a cold air induction box and replace the apexi pods with new ones?

You could just clean them.

I went from my Apexi pod setup in my R33 back to stock Airbox with Apexi panel fillter. Due to the same reason. Sucking in the hot air.

Should see you 300kw without hindering.

Also stops the annoying hissing they constantly do :)

many people have tested both and most have found that keeping a stock setup and perhaps changing to a k n n panel filter would be the best way to go about it and especially if you under the 350awkw mark.. they more for "show" really unless you build a proper box.. i'd keep stock, less attention from police too!

if you like the sound, keep the pods; i cleaned my mates apexi's with some dishwashing detergent in water...repeated step until clean rinsed many time in clean water n hung out to dry for four or so hours.

if ur tired of the noise like i am, going back to the stock box works nicely; there is a change in the feel of the power curve - more violent with the pods and more smooth with the box; i test drive the car on a cold night with the box, then changed to the pods and the feel is definitely there.

I prefer the pods for that nice noise n surge of power but the box soon as im only aiming for 170-180awkw

grab a stock box from the private classifieds, maybe odify it a tad as its not as free flowing as the r34 gtr airbox

Yeah, I quite like the noise too :)

Maybe I should just build a cold air box....

Are the pods illegal though? I thought you were allowed one mod for the intake and one for the exhaust?

Yeah, I quite like the noise too :)

Maybe I should just build a cold air box....

Are the pods illegal though? I thought you were allowed one mod for the intake and one for the exhaust?

What else did you mod? The FMIC is standard. So its hardly a mod :)

  • 1 month later...

yes it gets rid of most of it.

you will hear a little noise, but definitely not a WOOSH noise on boost.

i went from air box to pods, i initially liked it and so did everyone that i took in the car. but after a while i got sick of it, and mainly sick of explaining to the police that it isnt illegal. so i returned it to stock.

still is producing same power, it just doesnt go woosh then psssh anymore.

Brezza

pod filter are good for the first week if that, i was excited to hear the noise because its my first turbo and thaught it sounded good. got sick of the sound though, too much like a radio with no signal...

I just put a stock airbox back on after running pods for 5 years. Really don't lose anything except a little extra noise and just made 245kw at 14psi. As already pointed out the airbox is actually better unless you have a decent cold air setup and certainly helps in vic if you want less attention with respect to law enforcement :).

  • 2 months later...
  • 4 months later...
hey guys i got one of those stupid yellow stickers on my car but am having a hard time getting a hold of a stock air box for my r32 can any one help me out?

Put up a post in the Wanted to buy section. Thats how i got mine. In addition, look through the classified car parts section. You'll find one sooner or later.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You cut that screenshot a little short; immediately below it  First number is torque in Nm, then in brackets kg-m followed by ft-lb I'm not sure why they provide a range, I have always aimed for about 80% of the top to leave a little room for error
    • I downloaded the gtr r32 manual which I understand will be pretty much same as r34   i rear the page in screenshot and if I understand correctly, the torque for the 4 bolts are 78-98 nm. Why a range?    what does number below it mean( 8-10 ,52-78)?    
    • I doubt you'll find someone with specific experience. Any competent mechanic can service it, the motor is same as late 350z.
    • I saw the s15 version but will it be enough force for my clutch? I guess just repairing the booster is the best option 
    • recently picked up a very clean example of an NA r34 and want to start dropping in some turbo parts I've got laying around.    Wondering if anyone on here has chucked in a complete GTT Diff - is it straight drop in or will I have headaches? Looking to upgrade to the nismo 1.5way - but I would prefer to use the complete turbo rear end if I'm able.    Also. I have a complete manual conversion here waiting to drop in, but I need to confirm which clutch bearing carrier I need,  Brand new R34 Gtt gearbox with push type conversion. Any solid advice would be greatly appreciated.
×
×
  • Create New...