Jump to content
SAU Community

Recommended Posts

[taken from Rezz's photo thread, because I wouldn't want to detract from the threads purity :D And added here because someone was obviously interested]

Dealership prices (which is what you will find in car classified magazines) -

(obviously could go even cheaper via the owner or via auction)

* the average 95 r33 GTR is somewhere between 1.75-2million yen (you can get them a lot cheaper - but you get what you pay for).

* Decent 96 GTRs seem to be around the 2.3 - 2.5million area

* 97s are around 2.7-2.9ish

* 98s are high 2s - early 3million yen

* Add around 300,000+ for a v-spec

* below average to decent early r33s (turbo) can be had for 400,000 (sometimes less) to 900,000yen. I've seen a few heavily modifed examples (with low kms) go for considerably more than that. SIIs seem to range from around 600,000 to 1.6mill. Bearing in mind that those at the higher end would be showroom condition and modified.

4-doors are a little cheaper.

I've seen r34 GTRs dipping into the mid 3million mark. Nice GTTs are still around 1.8-2million-ish.

Interestingly, a low km late model r32 GTR will still earn a 2million+ price tag - with v-specs worth quite a bit indeed, given their age. Definitely a few 89 models going below the 750,000yen mark - but export demand might affect that.

You can pick up an early r32 turbo for next to nothing - literally.

using today's exchange rate as an example:

500,000yen=$6,312

750,000yen=$9,468

1million yen=$12,624

1.25mill yen=$15,781

1.5mill yen=$18,937

1.75mill yen=$$22,093

2mill yen=$25,249

2.5mill yen=$31,562

3mill yen=$37,874

3.5mill yen=$44,186

cheapest r32 gts-t I've seen for sale at a dealership=$1,136 (but I have also seen several offered for free - as the owners don't want to pay to get them towed away...)

Link to comment
https://www.sau.com.au/forums/topic/28840-current-skyline-prices-in-japan/
Share on other sites

I want an r33 gtr in the future, maybe 34 depending on price

estimating you from that data.. you could get a good r33 gtr vspec for about $30,000 AUD + importing shit

so all up your looking at nearly 40K

ive seen a few vspecs for mid 40s

ide have to say for peace of mind.. being able to drive and see your car when you buy it.. i would rather buy it here

well . i will sell you my r33 . 40K . its damn excellent. now its getting the full workout ( similar to the mines response kit ) . :D

Is this the one you let run out of oil?

Or the one your putting a Microtech MTX8 on that you want for $250 cause its all you have?

Or the one that money is no object and you want the best performance possible?

Let us know. Were all interested...

Is this the one you let run out of oil?

Or the one your putting a Microtech MTX8 on that you want for $250 cause its all you have?

Or the one that money is no object and you want the best performance possible?

Let us know.  Were all interested...

Hey strutto,

I was just gonna say the same thing, first keen on my microtech then i see him posting he only has $250 offering to the other microtech seller!!! :bs!:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Please do not connect it to your manifold. If you do, as GTS suggested please record the lot in 4K with good mics attached.   On the factory Skyline, there's a upside down pipe that allows it to breathe, looks like this   
    • For me I'd need some serious justification for why it has blown out.  Have you questioned him on it?  To be honest if you didn't question him right from the get-go on the first invoice that was already way over the initial quote and then you've (presumably) then paid another $1375 on top of the first invoice, then you're pushing shit uphill to get a favourable result now... It was years ago I last got an engineer out but it was around $450-$550 per visit.  That was just to inspect each progress point he gave me for the project.  Is he just doing progress inspections or is he providing engineering diagrams, technical assistance, etc??  If he's not, he's a filthy rip off merchant.  If the $3100 is the final sign off then you need to cop it on the chin, pay it and move on.  If it's not, piss him off and get a new one.  Not many Jeeps I'd value at $10K full stop let alone just engineering fees on a written off, half actual value WOVR Jeep....
    • Oh, yes. If you connected it to the manifold your first drive would be very eventful. Very shit. Very interesting. Perhaps take a video if you feel the need to see. Terminating the breather at the top of the bellhousing is normal/stock. Some gearbox lubes (hello Redline Shockproof) like to foam up a bit and require the breather to be extended up higher, so you don't get spots of smurf jizz staining the floor under your car. Mine is thus right up behind the head. Make sure you fit a u-bend at the top so it points back downward so that dirt and schmutz has a harder time getting into it.
    • Cheers for the replies. So i don't connect it to the manifold I just run the hose high up on the firewall?
    • It doesn't really answer your question...but is the head unit full android or just android auto, are you happy with how quickly it boots and responds, and do you have a link?  If we can identify good Android alternatives it will really help people stuck with Japanese screens. Did it have a separate reverse camera input so you would replace the factory one, or are you just going without now...that would be a pretty big steps back. And finally, do you have a picture of the "wire" that you can't plug in? Most likely it is some sort of aerial that is not too important eg japanese traffic or am radio or something if you haven't noticed a functionality issue
×
×
  • Create New...