Jump to content
SAU Community

Aac Valve Disconnected?

stenve

By stenve,
in Engines & Forced Induction

 Share

Recommended Posts

stenve Proficient

stenve

Posted
Posted (edited)

hey guys,

upon inspecting the engine bay the other day i found this:

(sorry for the shitty phone cam pic)

post-39016-1253179242_thumb.jpg

the white/grey plug is disconnected and appears to lead to the aac valve

Is this done for a reason?

i connected it to see what happens and the idle goes all over the shop

should also note that at the moment when the a/c is on idle is a bit wonky (ie: when coming to a stop revs drop down to 500/600ish rpm and car almost dies, will also do this randomly when stopped at lights etc)

not sure if thats related at all?

car is automatic r34 gtt, 98 model

any ideas?

Cheers

Edited by stenve
Link to comment
https://www.sau.com.au/forums/topic/288424-aac-valve-disconnected/
Share on other sites
mawzy Enthusiast

mawzy

Posted
Posted

It's possible been disconnected, because it's causing the ruff idle? Try taking it off and giving a good clean out. I've done this with r32's and it's helped clean up the idle. presume 34's are the same.

P.s. I'm having issues with my r34, and need to get hold of a tip 34. Could you do me a major favour. On the side of your intake there's 3 plugs, red black and silver. could you unplug the silver, and try start it? Would really appreciate if you could. understand if you don't want to. Thanks.

stenve Proficient

stenve

Posted
  • Author
Posted (edited)

thanks mate,

i tried what you asked (disconnected grey plug) starts up first go and idles fine.

Edit: ok scrap that.

took aac valve off cleaned it out, put it back on and connected it.

it started idling at 2000rpm and i went "oh no"

then i screwed in the idle screw just a little and it dropped all the way down to 1100rpm

fine tuned it down to 800rpm and all is good (air con works fine etc)

problem solvered

Edited by stenve
dori34 Grand Master

dori34

Posted
Posted

i have the same problem stenve,

i just havent taken mine out to clean it yet.

ill be doing it tomorrow so hopefully it solves my problem too.

when started and car is cold, does your car idle funny or only when warm or all the time?

stenve Proficient

stenve

Posted
  • Author
Posted

it idled fine with the aac disconnected. it just didnt compensate for things like ac when sitting idle at lights etc.

I only tried starting the car once with it plugged in and i cant remember if it was a cold start or what... but the revs were all over the place.

car is cooling down now. i'll go start it from cold again later and see what happens now its all clean. it seemed perfect when i checked it just before though

dori34 Grand Master

dori34

Posted
Posted

yeap cool, im pretty sure this is the problem on mine

cause i drove it for like a month with it disconneted, i didnt even know until i serviced the car and i noticed it.

pluged it back in and car idled lumpy and crap so i dc it, and idled fine but it would stall randomly when coming to a stop.

its connected back up now, but on cold start it idles funny but ok when warm, i had to play around with it to get it idling ok, not perfect tho.

mawzy Enthusiast

mawzy

Posted
Posted

Good to hear you got idle under control. Thanks very much for doing that check for me, although wasn't the answer I was looking for. I couldn't ask one more favour? Could you identify the colour of the wires that plug into it (not the engine loom side) And where they run too? A picture would be perfect, but again, mite be stretching ya a bit far. Sorry to ask of you again. Thanks

stenve Proficient

stenve

Posted
  • Author
Posted

yeah mines still not idling perfect either, when in neutral its spot on 750rpm and stays there. put it in drive and it goes up and down a bit, esp with the ac on.

gave it a cold start this morning and the revs sit at about 1200rpm for a minute or 2 then drop down to normal.

might need a little fine tuning still, but it's alot better than before.

Mawzy: i'll try have a look sometime today. but its about a 11ty billion degrees outside. see how i go

BASHO Mentor

BASHO

Posted
Posted

:) This may be a bit of help if you've cleaned out you're AAC valve thingo (R34GTT)

idlespeed.th.jpg

double clic to enlarge then double click again to supersize

I think if you have a big zorst and/or pod you may find that even when set it'll still run a bit over the OE 650/700 rpm set level.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Neil's R33 Gts-t Build

      By Dose Pipe Sutututu · Posted

      Let's hope that's not a copy pump either. There were so many copies of them back in the day.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Damn it, I was at work last night, and stayed in a room there during the storm with the car outside, but undercover, I just went downstairs and well....there was a large steel locker that has come from some place last night, it wasn't anywhere I could see yesterday, and yeap, it landed on the fraking car....of course it did..... LOL So, I'll need to take it back for paint and panel, luckily it was only the boot that took the hit, so it could have been worse Serves me right for staying at work and getting on the cans with some of the boys
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yeah, really happy with how it all turned out As for aftermarket lip, nah, I'm not really a fan for practically reasons on a street car that gets driven everywhere  I did have the full lower kit on my 2015 STI, but found the front lip scrapped alot, even at stock 4x4ish ride height As the NC sits now, with the lowest point of the car at 110mm, so just legal, some steep driveways and steep speed humps will still "just" scrap those little plastic OEM air dam thingies on the undertray just before the front wheels
    • Dose Pipe Sutututu
      Hypergear Turbochargers and High flow Services Development thread

      By Dose Pipe Sutututu · Posted

      Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
    • hypergear
      Hypergear Turbochargers and High flow Services Development thread

      By hypergear · Posted

      I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
×
×
  • Create New...