Jump to content
SAU Community

R32 Gtr Arc Airbox With Trust Or Hks Hard Pipe Suction Kit

im late

By im late,
in Engines & Forced Induction

 Share

Recommended Posts

im late Proficient

im late

Posted
Posted

Hey All,

I currently have a HKS Racing Suction Kit (MAF-less version) with K&N Pod Filters and a custom rear turbo outlet pipe to clear the 6 Boost Manifold:

IMG_0169.jpg

Now I have bought a ARC Airbox and I wish to fit it.

I know that HKS and Trust/GReddy have suction kits that are designed to be used with the standard air flow meters.

My questions is, is there anyone here on SAU that has one of these MAF suction kits and the ARC airbox fitted in their R32 GTR?

If you do would you be kind enough to post pics?

My Maffless HKS suction kit does not allow the ARC airbox to sit where it needs to. So I am going to end up selling my current kit and buying the MAF version of the HKS or Trust/GReddy kit. But before I do I just want to see if anyone else has this required setup.

Any help would be greatly appreciated. :)

  • 2 months later...
noone Experienced

noone

Posted
Posted

cant say for sure as I upgraded to z32's but I seriously doubt with the trust kit you will have room for the arc box as well

Motor is out of my car at the moment so cant say for sure

I would be pretty sure there isnt room though

hope I am not too late to save ya spending money

Beer Baron Grand Master

Beer Baron

Posted
Posted

it's going to be hard to fit. why are you so set on the ARC box? I used one for a while and they are ok, but not amazing. plus they are pretty heavy and that weight is going where you least want it, right up the front of the car and nice and high in the car.

the set-up you have now is quite good. you could consider making a partition/box for your current 2 pods? they are good quality and give a lot of surface area so offer good filtering and little restriction. :P

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      R32 GTST - 600KW+ RB28/CD009 Build

      By Dose Pipe Sutututu · Posted

      Middle seat good for a slab of beer or Esky for a road trip. 2x kids, means 1x free seat lol.
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      So we have most the interior back in, and for the first time with one OEM speaker hooked up. The 31 is running, driving and now tunes!!! Hahaha yet another step for the sub that sat 10m under for two weeks!!! unbelievable really 👌 lots of love work and not giving up on her. Seen so many youngsters part way less, and in way better condition. I’m stubborn, thinking another problem is just a hurdle to overcome, One at a time. IMG_9277.mov
    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      That is correct. I'm using a modified ABS ring and a ZF speed sensor on my rear diff for speed input. I'm running a Haltech ecu. 
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Been busy with the newborn. We originally thought we were going to go for a third, but we're good with two lol. He's starting to actually sleep now so I've had some energy to work on the car. It's been parked away in the garage since late November due to winter.  I went ahead and redid all my head oil drains. I originally had my front and rear head drain going into the same pipe but have since split them up. I also added an Ethanol content sensor to get ready to run E85 this summer. Tossed it on my return line. Sensor sits nicely under my intake manifold.    I also have a lot of parts that came in for my rear end. I'll be swapping over to a 3.3 final drive and doing the GK teck anti squat mod. While the rear subframe is off, I'll also change every bushing. We're planning on buying another house soon with the condition that I get at a minimum a 2 door garage, so I'll wait to have more room for this. Now onto the strange things that recently happened... After changing the lower rad hose (It had been sitting in my cabinet for well over a year and was the last hose I had to replace), I let the car idle in the garage to bleed my coolant. After running for a few minutes, it started missing. Got much worst within a minute or two and then stalled and would not restart. My crank sensor decided to crap itself. No damage, no explanation, just died. I went ahead and replaced it with another ZF sensor but the heavier duty stainless model with a shield. Tossed that in and started right up. Has anyone else seen this? I hate when things fail without cause. Luckily this was a blessing in disguise... This lead me to recheck my timing. It seems I may have had a beer or two the last time I had set my TDC angle as I was off exactly 5 degrees... I miscounted a line haha. I was running 5 degrees less then commanded. It's a little embarrassing but helps explain why my dyno operator seemed to think I should be making more then 478rwkws.        
    • hypergear
      Hypergear Turbochargers and High flow Services Development thread

      By hypergear · Posted

      Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
×
×
  • Create New...