Jump to content
SAU Community

Recommended Posts

the PCV valve is on the rocker cover at the front on the plenum side. It has a rubber hose that goes from it to the plenum.

I removes blow by from the crank case, but when under boost it should shut and the crank case gasses go into the intake for the turbo, after the AFM.

I can see how it could possibly hurt the engine, as long as the gasses can escape elsewhere.

Hmm, I can't see any harm in blocking it then. I've got the breather line coming out and through my catch can so in theory that should be enough.

What's the purpose of this extra breather if the main one is always available for venting blow by?

The plenum breather sucks out blow by at vacuum, the turbo line is for boost. I 'suppose' its better to have it go through the plenum, as it is less likely to coat the cooler, but if you have a catch can? Sorry I dont know for sure.

I do remember old cars just had a vented/filter oil filler cap, but emissions laws require all crank case gasses to be burnt in the combustion chamber.

  • 5 weeks later...
Unrelated id say.  

Shitty idle most likely due to 0/2 Feedback still being on, makes idle pretty crap turn that off and idle will be great.

JimX - Try altering your cranking inj times. I increased most temps in mine by about 5-10 ms and it cleaned up starting.

Sorry for gravedigging, but I just wanted to say that I *finally* remembered to adjust the cranking injector times. I increased them by 5mx across the board (to make it easy to reset if needed) and it improved starting dramatically. Wish I'd done it sooner!

Ok I may as well keep digging. What are the Kanji characters for yes/no/off/on in the Commander menus? The reason I ask is I think the O2 feedback was off all this time. This would surely have made my fuel economy worse. It didn't seem to idle any worse in either setting, so I've changed it to what I think is "on" to see if it improves my fuel economy.

So is on/yes the character that looks like a plus sign or is it the one that looks like a curvy "7"?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
    • Yes I as well would like to find out where I could get some of the seat material with the red or blue small squares in it
×
×
  • Create New...