Jump to content
SAU Community

Recommended Posts

Hear are my mods...(r32 RB20)

FMIC, Full 3" Exhaust. 3" dump/front pipe. HKS POD, GFB BOV, HKS cam gears, and timing advanced a tad.

Hears my prob...

Ive raised boost up to 10psi, tried pushing it a tad further for sum fun ( knowing i could cause damage) and once boost reaches its full potential the car seems to stutter (Misfire) but if i gradually build up the boost it doesnt seem to have this problem?

Any ideas?

Link to comment
https://www.sau.com.au/forums/topic/288838-cannot-raise-boost/
Share on other sites

take out your spark plugs, use a feeler gauge set [buy a set for around $15, can get bigger better sets for more], and squeeze your plug gap down to 0.80mm, it will be set to 1.0-1.1mm std.

Ask someone to show you how it's done, once your shown its easy, annoy your lawnmower shop or something [anything with a sparkplug], with a plug spanner, feeler gauges, and a spanner set for other bits and pieces, you'd get it done inside an hour or so.

No. Looking at the spark plug there's a bit that comes up from the centre of the plug to the end (the end that screws in). About a millimeter away from the end of that is a tab bent over that comes from the side. Making that gap shorter is this name of the game today. Don't let them touch, coils don't like it if they do.

My bet is that you have a standard ECU which will retard timing and run rich when you try and push boost past 10psi.

You need an aftermarket computer or a Apexi SAFC or similar at the very least.

Was thinking the same thing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...