Jump to content
SAU Community

Recommended Posts

Hey guys unfortunately I'm finding out more and more wrong with this R32 that i bought last week lol i was really stupid to not try and find someone that knows what there looking for (bad things)

in a car before i bought it. but yeah im curious weather i should stick the the RB20 (146.000K) and fix the leak the turbo has. or totally convert it to the Rb25 because i only want to make the power that the 25 has out of my 20. so.. i dont know?? could any one help ? :( is is worth the money fixing the 20 rather than replacing it? i dont really even know if the turbo is leaking all im getting that from is from when my foot is flat from 2000rpm to 4000 boost hits what its suposed to wich is 12 or 13 on the guage but after 4000 it drops down slowly to 10 and then 8. ?? is that a leak?

payed 3 for my motor, 1.5 for the gearbox and ~1k labour, i could have gotten it cheaper but i bought the motor/gearbox seperately. If you are going to do the conversion make sure you do it all together, i did the motor first then the gearbox abit down the track because i didnt have the patience to save and do it all at once. payed the price and got stung 1k labour each time

what is this leak ? It isnt leaking oil by what I gather rather your boost is dropping off. what boost controller are you running ? What turbo is on it ?

  GTR-32U said:
what is this leak ? It isnt leaking oil by what I gather rather your boost is dropping off. what boost controller are you running ? What turbo is on it ?

im really new to the turbo import scene sorry... im not exactly sure what it is but when i accelerate foot flat from 1800rpm to 4500rpm boost hits and stays at 13 but then after 4500 it creeps down to about 8. my boost controller is a manual twist top type. should i maybe adjust it down ? its only a stock turbo with stock cooler.

  R31Nismoid said:
Just because there is a bit of leaky oil you wanna change out the motor?

no not because of the leak but just what iv herd about the 25's all people ever tell me is that there bullet proof. are they kidding me?

  cln said:
id rather pump a 20 all day long than a 25

After reading what people on here say about the 20 yeah i'm starting to agree. has anyone ever had a 20 rebuilt ? if so what did it cost and how long did it take ?

dude u got a boost leak. i had a similar problem. bought myself an electrnic boost controller and presto, hold boost fine now :D.

why the hell would u change the motor when there appears to be nothing wrong with your current one?

  QUICKY said:
dude u got a boost leak. i had a similar problem. bought myself an electrnic boost controller and presto, hold boost fine now :D .

why the hell would u change the motor when there appears to be nothing wrong with your current one?

Oh OK thanks man. yeah im really really new to everything about these kind of things... i guess i jumped to conclusions too fast :) thanks dude i can sleep now lol

  QUICKY said:
dude u got a boost leak. i had a similar problem. bought myself an electrnic boost controller and presto, hold boost fine now :D .

why the hell would u change the motor when there appears to be nothing wrong with your current one?

So are you saying you got an electronic boost controlller to fix a boost leak?

course not. but in my circumstance we eliminated the possibility of a boost leark (checked all hoses, intercooler piping etc),then changed the intake pipe to a steel item to illiminate it as being the culprit (by sucking shut),then even changed the turbo actuator. when all those failed, we installed a ebc (was running a turbosmart dual stage boost tap prior) and now she hold boost at 1.3 bar :(

  QUICKY said:
course not. but in my circumstance we eliminated the possibility of a boost leark (checked all hoses, intercooler piping etc),then changed the intake pipe to a steel item to illiminate it as being the culprit (by sucking shut),then even changed the turbo actuator. when all those failed, we installed a ebc (was running a turbosmart dual stage boost tap prior) and now she hold boost at 1.3 bar :)

Can i buy a steel intake pipe? or do you have to get them custom made? also will a steel pipe with a pod on the end make a flutter/dose sound??

yeh u can buy them, apexi make a intake kit, but bit pricey. otherwise u can get one off ebay or ask any exhaust shop to make one up for u ;).

and yeh it flutters when u have a pod at the end of it

fk me, If you wanna swap the motor because of what sounds to be a small boost leak of some kind, then your best to take it to a mechanic who knows what he/she is doing to find the problem. Just so you dont wind up paying $5000 for something that might only cost 50 cents.

Good Luck

mate instead of sitting on the computer typing on a forum, why not book the car into a performance workshop (surprise, there are plenty of them) and get them to give the car a once over. then u have peace of mind knowing that the problems have been fixed, and u didnt have to fork out 7K for a new engine. 14 pound with a stock 32 cooler isnt the smartest idea either..

Thanks everyone :D i really appreciate everyone's opinion alot :cool: i needed it. Im going to go see a mechanic tomorrow in yatala. thanks heaps sorry if i wasted anyone's time on this stupid problem :)

OH one more stupid question... How does a manual boost controller work? iv twisted the top the way it says to twist to turn it down but when i tested it its still hitting 13. i think i may have to turn the nut that's under the top too?? sorry... i work in a computer store and get these kind of stupid questions from customers all the time and i know how annoying simple stuff like this is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The trouble with phone apps is that they really do not know the sensitivity of the mic on each specific phone, whether there is some sort of cover or skin that can change that, etc etc. So the readings off them are not calibrated. You certainly couldn't be sure that you were even within 3 dB. I have the same app on two (actually more than that) different phones/tablets and the readings in the same room at the same time are never the same. I don't mind the apps - they are as useful as a dyno - if you're testing for delta from thing1 to thing2. But not to try to generate some sort of absolute value.
    • I'm gonna use the "Sound Meter" app from the Google Play Store and as close as I can bother to these procedures: 4. TEST METHOD FOR ALL VEHICLES EXCEPT PRE ADR83 IN-SERVICE GOODS VEHICLES AND OMNIBUSES 4.1 Microphone position 4.1.1 The microphone shall be directed towards the orifice of the exhaust outlet and shall be supported by a tripod or similar device not providing excessive acoustic reflection. The general requirements for positioning microphones are shown in the Appendix. 4.1.2 The nominal axis of maximum sensitivity of the microphone shall be substantially parallel to the test site surface and shall make an angle of 45 degrees ±10 degrees with the principal direction of gas flow from the exhaust. 4.1.3 In selecting the 45 degree alignment from the outlet of a motor vehicle fitted with two or more outlets, only the angle resulting in the microphone being farthest from any other outlet must be used. National Stationary Exhaust Noise Test Procedures for In-Service Motor Vehicles Page 3 4.1.4 The height of the microphone above the test site surface shall be equal to that of the orifice of the exhaust outlet ±25mm but shall not be less than 200mm above the test site surface. 4.1.5 The distance of the microphone from the exhaust outlet orifice shall be 500mm±25mm. 4.1.6 [Relates to vertical exhaust outlets] 4.1.7 For vehicles fitted with one exhaust outlet the microphone shall be placed so that the greatest possible distance is achieved between it and the vehicle. 4.1.8 [Relates to multi exhaust outlets] 4.1.9 [Relates to multi exhaust outlets] TLDR: 200mm off ground 45 degree angle relative to exhaust flow 500mm from tailpipe exit. (I probably won't use a tripod) Here's a photo, cause I read the instructions wrong myself.
    • No ABS, no TCS, no airbags, no cruise control, no lane departure assist, no emergency brake assist, no orange lights in the mirrors (continuously annoying me in multi-lane traffic), no stupid rear view camera. I am the one responsible for where my car goes and how it does it.
    • Cheapest Jaycar one is only $65.
    • Probably best way would be using a proper dB / SPL meter lol Buy one and ship it from state to state to have a consistent test device lololol  
×
×
  • Create New...