Jump to content
SAU Community

Recommended Posts

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Looks like I should be able to come, my boss told me I am not going to Townsville.

Scratch that, I got told today that I am now going to Townsville and I'll be away for the 22nd. Bugger!!!

Ok, so here's the issue as I see it: The recce runs aren't so much a problem: I have nothing but time on my hands these days, so I am able to go far and wide to find some good roads if needed, and there's been plenty of offers from you Northern guys to do the same...

The endpoint is important: I've been on a few cruises now, and it's the endpoint that generally makes or breaks them: the last one was good because it was free of any public/crowds, had bathroom facilities, shade, and plenty of seating...

Those of you who were on Darrin's go-karting cruise would agree: the endpoint in that one was great for the same reasons (and it had pluto pups and go karts as well!!)...

I am more than happy to organise another southern run, finishing either at Myles' place again (assuming he's ok with that), or my place.... Alternatively you Northern folks can start putting some thought into suitable places to finish up, and we'll do the whole shebang up your end... :)

Let's aim to have a decision made by the end of the month: that way we have plenty of time to finalise the route, etc... Shade will be especially important for this next cruise, as it's not going to be getting any cooler in the near future....

I'm going in for a shoulder reconstruction on Nov 9th, I am not allowed to drive for a month, doctors orders, so no insurance etc. If my L plate son thinks he can handle it I might get there, otherwise its wait till the next one.

When the route is laid out my son and I can do a test run so he knows the way.

At this stage, it looks like being down this way, if not the same run we just did (but in reverse, maybe?)... Since I have stupidly promised a mate to run his business for him while he traipses around Europe, I'm way too busy to do a Northern recce run, but will see if I can find another interesting route locally...

That is of course unless someone else has done some groundwork up North??

At this stage, it looks like being down this way, if not the same run we just did (but in reverse, maybe?)... Since I have stupidly promised a mate to run his business for him while he traipses around Europe, I'm way too busy to do a Northern recce run, but will see if I can find another interesting route locally...

That is of course unless someone else has done some groundwork up North??

At this stage, it looks like being down this way, if not the same run we just did (but in reverse, maybe?)... Since I have stupidly promised a mate to run his business for him while he traipses around Europe, I'm way too busy to do a Northern recce run, but will see if I can find another interesting route locally...

That is of course unless someone else has done some groundwork up North??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • i need a complete tail light for my R33 GTR if you have please let me know.
    • I need a great maintenance workshop around Idaho, if you know one please let me know..
    • Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
    • I'm mark from Idaho.
×
×
  • Create New...