Jump to content
SAU Community

Fs Vg30 Turbo

E-Z
 Share

Recommended Posts

E-Z Collaborator

E-Z

Posted
Posted

so yeah thinking of upgrading my turbo when i do my engine build, so here it is, vg30 single turbo BB, internal gate, never ran past 9 psi,

its off a 88 y31 cima.

looking for $400 ono

pm or sms 0450929227

Phone571.jpg

Ryan

Link to comment
https://www.sau.com.au/forums/topic/289221-fs-vg30-turbo/
Share on other sites
W0rp3D Grand Master

W0rp3D

Posted
Posted

i have a high flow version of one of these on my 33, a lot of ppl like high flowing a 33 turbo with the rear housing off one of these, for a cheaper option one of these are a straight bolt on but have a thicker shaft so even with the ceramic rear wheel (which i still have) you can safely run 15psi, for a while i was running 18psi without a problem.

Dont know if the front wheels are any bigger than an rb25, any chance of getting you to pull the cover off and measure it, got a standard rb25 here that i can measure to compare.

Link to comment
https://www.sau.com.au/forums/topic/289221-fs-vg30-turbo/#findComment-4847445
Share on other sites
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • GTSBoy
      AC not coming from top vents

      By GTSBoy · Posted

      What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
    • dbm7
      Shifting questions

      By dbm7 · Posted

      ...oops. forgot the TCU end...
    • Sleepergm
      Custom titanium intake

      By Sleepergm · Posted

      No I got mine from a friend that had fabricated one … but I had to fit it to my setup which was a hks turbo setup. His was a Garrett -7. So one of my turbos was not a flange for one side … then I had a leak in the welds I had to find a weld shut … in the end the setup was decent priced but I spent a lot to get it fitted. A couple companies I checked would make it but you’re talking 7-9k aud with titanium. No joke mine was 6-7k even second hand after I had to fit it in Hong Kong … labour is expensive here. 
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I'd just like to restate that I don't think anyone here is actually hating I recently sold a car part to a guy who was building a forged auto R34, with MV stall and aiming at ~450kw. I told him that I'm him, from the future and to stop after it explodes once. I told him I knew he won't listen the first time, and that's fine. But if my predictions do come true - Change direction faster than I did. I also said it's probably no coincidence that the dyno plot of a reliable turbo engine starts to look a lot like a N/A motor. :p
×
×
  • Create New...