Jump to content
SAU Community

Recommended Posts

hi guys..

when i had the intake pipe removed and saw the dirt on the TB, i've decided that i wanted to clean it.. after removing the TB from the inlet manifold, i've also noticed oil/dirt inside the inlet manifold.. is this normal? is there a way of cleaning it?

can anyone explain this to me?.. im just a lil' worried..

i had rough idling before due to faulty coils but i've fixed that and replaced the spark plugs as well.. apart from that, the car is running fine..

tnx guys..

Link to comment
https://www.sau.com.au/forums/topic/289252-oildirt-in-inlet-manifold/
Share on other sites

ive had this before, also noticed mine when replacing coils and plugs, i also thought it was a worry but car runs mint, i asked around here and everyone said it was common/normal, although im still not sure why or how is gets there

tnx guys for your inputs..

i was lookin thru n/a section last nite and there was a similar issue with a guy who's got a 34.. if that was pretty normal then im at ease to know/for now..

as for your question Eug, i didnt replaced my intake pipe but i did attached a pod filter a couple of months after i got my car..

the hose running out of the top of the engine is feeding the intake oil and fumes. If you have a look at the stock air intake you would have seen a big empty box after your filter box, that was to catch the oil dripping out of the engine. If you replaced it with a straight through pipe you have now allowed it to be sucked straight into the manifold etc. Only way around it is to get an oil catch can.

i see.. i understand it now :) .. but wouldnt it be weird if i put an oil catch can in my n/a engine? i thought that oil catch cans are most useful for turbo/high performance cars?

is there a lot of sau members out there with an oil catch can in their n/a engine?

Some racetracks/events don't allow cars to compete if they don' have one because they don't want oil on the track. Hence why only turbo/high performance cars have them coz they are the ones that usually drive on the racetracks lol..

And i'm pretty sure oil and oil fumes would lower the octane rating of the fuel or something, and also restricting airflow through the manifold and hot air (oil fumes) would surely suck the engine of Horse power :)

Edited by R34 -_-
the hose running out of the top of the engine is feeding the intake oil and fumes. If you have a look at the stock air intake you would have seen a big empty box after your filter box, that was to catch the oil dripping out of the engine. If you replaced it with a straight through pipe you have now allowed it to be sucked straight into the manifold etc. Only way around it is to get an oil catch can.

Just to correct you there. The empty box you are refering to is a resonator which muffles intake noise as well as adds power to an n/a setup (I know it may seem wierd) - but it has nothing to do with catching oil.

Some n/a guys on this forum have used oil catch cans - but the advantages are quite small for a stock n/a. I was contemplating this idea but its not worth the cost unless you are really driving hard (on the track of course) or if you have a turbo setup.

:P for that info R34 -_- .. i'll look into that.. i might invest on one l8r down the road.. just currently replacing my rocker gasket and cleaning my aac valve (i think).. also cleaning the TB..

thank u again :)

no it doesn't i already answered the question before, it comes out of the one way valve sitting on the top of the engine, there's a black hose coming out of that valve that joins into your air intake pipe, the oil comes out of the valve and into the pipe, due to air flow it is sucked through the intake and into the combustion chamber where it is burnt and turned into exhaust gas.

case closed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • PULSAR PSR2860R 0.86A/R or 0.64 GEN 2 Turbocharger Both are -50*67mm 8 blade billet compressor wheel Cheers  
    • This isn't for lotsa powers, and time and effort isn't even a thing I'm concerned about The whole reason is "Just because fun", and "Just because fun" is what I do And whilst there are other kits, with better and more modern turbos (Rev9 use the same Kraken manifold I believe.....EDIT... nope, the Kraken is a cast jobbie, the REv9 uses welded up stainless, plus $8000 AUD before shipping, installation and tuning) Where else in Sydney can I do a drive in drive out with the after sales support that MX5 Mania give My Turbo 86 made around 200kwatw on a AVO turbo kit that Pulse fitted, and it was over 100kg heavier than the MX5, but it was a blast to drive around the streets, until I crashed it.....DOOH, so somewhere around 200 ish level and some whooshy noises and I'll be happy driving to work, the shops, or heading into the country with Jackie for Devonshire tea So, thanks Dose for your info, it sounds like a 0.64 will be fine for what I'm after👍 The only real racing I do nowadays is to the toilet
    • This isn't for lotsa powers, and time and effort isn't even a thing I'm concerned about The whole reason is "Just because fun", and "Just because fun" is what I do And whilst there are other kits, with better and more modern turbos (Rev9 use the same Kraken manifold I believe), where in Sydney can I do a drive in drive out with the after sales support that MX5 Mania give My Turbo 86 made around 200kwatw on a AVO turbo kit, and was over 100kg heavier than the MX5, but it was a blast to drive around the streets, until I crashed it.....DOOH, so somewhere around 200 ish level and some whooshy noises and I'll be happy driving to work, the shops, or heading into the country with Jackie for Devonshire tea So, thanks Dose for your info, it sounds like a 0.64 will be fine for what I'm after👍 The only real racing I do nowadays is to the toilet  
    • Hey @Butters, did you end up getting this clutch in ? I have just ordered to a uniclutch track to go in my getrag 6 speed that’s in my BNR 32     
    • I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
×
×
  • Create New...