Jump to content
SAU Community

Attain Hicas Bar, R33 N1 Vents, Mint R33 Gtr Interior, R34 Gt-t Slotted Rotors + Green Stuff Pads, Ohlins, Gfb Stealth Fx


Recommended Posts

Sorry the old thread was getting difficult to understand so I have combined them and included pics of bits that didn't have pics before

Location - Adelaide can post/courier at buyers expense

Contact - PM or SMS 0404998591

Brand New Genuine Nissan Plastic GTR N1 Vent, only one the other went missing, cost $380 from Nissan. These have special clips and a sticky seal making installation a simple process of just cutting out a slot, peeling off the backing to the sealant and clipping in place Price - $150

n1vent.th.jpgn1ventpartnumberbox.th.jpg

GFB Stealth FX BOV kit complete with the optional whistle trumpet adaptor, the normal trumpet adaptor, the standard plumbback adaptor and a 20mm hose plumback adaptor. Currently has the universal adaptor fitted also have a S15 adaptor kit I can supply with it for free as shown on the left in the picture. Comes complete with original purchase receipt for $500 and receipts for the extra fittings and trumpets. For those wishing to use this in the standard position you simply need to purchase the adaptor from GFB and it fits in the bottom Price - $300

gfbstealthfxfittings.th.jpg

Brand New in box Attain HICAS Lockbar high quality solid Japanese HICAS Lockbar perfectly safe unlike the many cheaper unsafe/flexing china spec ones. Price - $170 Delivered

attainhicasall.th.jpg

attainhicasstickerinstr.th.jpg

attainhicasbox.th.jpg

R33 Series 2 Front Bar in black complete with the rare Nismo Lower Lip. Price - $375

r33frontbarwithnismolipf.th.jpgr33frontbarwithnismolipb.th.jpgr33frontbarwithnismolip.th.jpg

R33 Series 2 Front Bar in maroon complete with the rare Nismo Lower Lip + N1 Vents. I haven't seen another Series 2 bar that has had N1 Vents fitted before but I think it compliments the Nismo lip giving a tuff look. The bar comes with all the bits to properly reattach the lip and N1 vents, in the plastic bag in the picture, and will need painting afterwards. The bar has been sanded down ready for painting hence the colour around the vents etc. Price - $275

maroonr33frontbarwithn1.th.jpg

Full R33 GTR Interior in excellent condition including front and rear seats + front and rear door trims/cards. Price - $1400

All in mint condition will remove this weekend and upload pictures

Front R34 GT-T Slotted Rotors used very low kms but in excellent condition and freshly machined.Price - $200

r34frontslottedrotors.th.jpg

Brand New (Just trial fitted) Front Greenstuff Brake Pads to suit R33 GTS-T R34 GT-T R32GTR WRX etc - $120

ebcgreenstuff.th.jpg

OR BUY BOTH FRONT ROTORS + GREEN STUFF PADS FOR $300

Apexi Pen Turbo Timer as new complete in box bought from Autobarn and as such has english manuals aswell as jap. Price - $90 Delivered

apexipenkit.th.jpgapexipenkitcloseup.th.jpg

R33 GTS-T Ohlins Rear Damper Adjustable Shocks and Springs. These shocks feature massive inverse monotube inserts. Price - $400 Pair

ohlinsrearleft.th.jpgohlinsrearright.th.jpg

Brand New Bodyform 400R Rear Bar and Side Skirts these people make the best fitting and highest quality kits hand made in Australia. Cost $950 + postage with receipt of purchase. Price - $800

As new R34 Stock Catalytic Converter used for a few hundred kms perfect for clearing defect or returning car to stock. Price - $60

r34cat.th.jpg

R33 Stock Catalytic Converter should fit S13 R32 R33 and Cefiro and they all have the same length cat and flange angles. Price - $40

r33cat.th.jpg

------------------------------------------------------------------------------------------

Location - Adelaide can post/courier at buyers expense

Contact - PM or SMS 0404998591

Edited by nigelswazi
Link to comment
Share on other sites

Had a few PM's about the Bodyform bodykit parts these are to suit an R33 GTS-T

Brand New Bodyform 400R Rear Bar and Side Skirts these people make the best fitting and highest quality kits hand made in Australia. Cost $950 + postage with receipt of purchase. Price - $800

Feel free to make reasonable offers on the parts left for sale

Edited by nigelswazi
Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
    • Thanks for the replies guys, it's really appreciated.  It seems the kit was supposed to come with those injector bosses but hasn't. Unsure if they'll help as even with the adaptors to make them a 3/4 height injector they still sit too far out so mount the fuel rail?
    • Hello, I am looking to replace my two rear drive shafts in my R34 N/A Skyline but I'm finding conflicting information. Do S13/S14/S15 or R32 NA/ R33 NA fit? https://justjap.com/products/gsp-premium-rear-drive-shaft-l-h-nissan-silvia-s13-s14-s15-3x2-type?currency=AUD&srsltid=AfmBOoqY7EwDaYCUoUU3mxxZ_qrUXkVVHiV4MIN7ozoar6scjnEiekv- would this fit?
    • Hoping they release an R34 getrag pull type.  
    • You need the bottom spacers, to make it a 3/4 height injector. https://www.efihardware.com/products/3040/injector-adapter-lower-for-extended-nose-injectors   And you'll need to buy the right injector bosses, these "might" fit. You'll need to measure it up. https://www.nzefi.com/product/raceworks-lower-injector-mounting-boss-kit-for-r33-rb25det-s14-s15-sr20det/  
×
×
  • Create New...