Jump to content
SAU Community

Envy Imports

EJD001

By EJD001,
in New South Wales

 Share

Recommended Posts

EJD001 Mentor

EJD001

Posted
Posted

Just posting this as i haven't seen any up to date dealing with this company.

Got there this morning and spoke to Herman, was only looking at getting a SAFC II fitted to the car, had a bit of a chat to him and found out that they are now a NISTUNE dealer.

Having looked into this before it was a few days turn around from other suppliers, I asked them what the turn around time was, to my pleasant surprise he said 2-3 hours, as they keep them in stock.

Ran the car on the dyno to see what it was doing.. I have now got the record for what he said was the dirtiest (fuel out the exhaust) skyline he has seen!!!

Had a bit more of a chat and decided to go with the NISTUNE as it just seemed like the better option..all up the NISTUNE was fitted and tuned to my car for $1000 bucks

Car went from 155kw to 221kw, backed off slightly to 216kw due to a slipping clutch.

Spoke about future mods that i should do with the car, any question that i had was answered, and he even explained a few things i wasn't aware of.

Im just posting this up as it is always good to see positive feedback about a garage, they will defiantly be seeing my car back in there.

Mick!!

Link to comment
https://www.sau.com.au/forums/topic/289411-envy-imports/
Share on other sites
DRD-00F Grand Master

DRD-00F

Posted
Posted

I would assume for 216kws, he has upped his boost a lot, or it's a happy dyno (which is the word on the street for envy).

But the peak power isn't really important, it's the delivery of that power and I'm sure now with a tuned ECU that you're happy as larry!

Link to comment
https://www.sau.com.au/forums/topic/289411-envy-imports/#findComment-4845868
Share on other sites
EJD001 Mentor

EJD001

Posted
  • Author
Posted
Massive gain there Mick, you have to be happy with that :D

Are you still running standard boost?

No boost controller atm, they recon with a EBC and wastegate i will be pushing high 230 , low 240kw

what about fuel system??

Stock atm.. when i do the EBC im going to upgrade the fuel pump, they recomend a intank walbro

Good to hear!

Herman was asked to guestimate how my car would go on Dyno at the SAU Event 16/08/08 and with my minimum mods/boost

he was only 8kw under.

BTW, he would have upped your boost a bit?

Hey terry, i think herman said that the boost is up to around 15pound but bleeds of to around 12pound, hence the need for a better wastegate

I would assume for 216kws, he has upped his boost a lot, or it's a happy dyno (which is the word on the street for envy).

But the peak power isn't really important, it's the delivery of that power and I'm sure now with a tuned ECU that you're happy as larry!

Yea power delievery is so much better.. just felt like a new car when i left the place.. even the girfriend said she could notice the difference!!

Link to comment
https://www.sau.com.au/forums/topic/289411-envy-imports/#findComment-4847383
Share on other sites
evil_weevil Grand Master

evil_weevil

Posted
Posted

Id say the stock fuel system will be very close to its limit..

my stock fuel pump died cause a certain workshop tuned it with a fuel cut defender on 12psi and made just under 200rwkw (not envy)

went to unigroup and had the walbro installed - much better and then when I did the turbo conversion had the larger z32 afm and 555cc nismo injectors

once you get them, get a retune and you'll be laughing :huh:

However your stock turbo may not last..

Link to comment
https://www.sau.com.au/forums/topic/289411-envy-imports/#findComment-4847829
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


×
×
  • Create New...