Jump to content
SAU Community

Recommended Posts

Im getting to upgrade my stock injectors in my r33 gtst to nismo 555cc injectors and want to set them up so i can drive to the tuner to get tune. the stock injectors are 370cc so ive worked out the corecction to be .67, now with the latency diff i know its the new latency minus the old latency , but i dont know the latency for the nismo 555cc injectors but i know the stock ones are 0.528, so can anyone give me the vaules they have for upgrading to 555cc nismo in there rb25 or tell me the 555cc latency thanks

why is the latency 0.18? if the 555 is 0.71 and stock is 0.58

cant remember the latency for each but when i got my 555s i spent a while looking around for them and came to .18 correction. car ran perfectly first kick and drove on the same tune for 3-4 months with no troubles

just did a quick search and found this

http://www.skylinesaustralia.com/forums/In...smo+555+latency

cant remember the latency for each but when i got my 555s i spent a while looking around for them and came to .18 correction. car ran perfectly first kick and drove on the same tune for 3-4 months with no troubles

just did a quick search and found this

http://www.skylinesaustralia.com/forums/In...smo+555+latency

yeah my mistake i was finking of stock injectors as .582 rather than .528 doing calcuations adds to .18 your right

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Unlikely, as per Greg's post. This is not helical diff behaviour unless one wheel is up off the ground. Shimming what? You don't "shim" a mechanical LSD. Probably not in the sense that you have heard of people "shimming" a diff. And the process that Nissan f**kwits call "shimming" a diff involves super-preloading a VLSD cartridge against the side of the diff to create a friction/wear point (in a place that it wasn't supposed to have one) to make the sloppy, useless, viscous diff into a hybrid viscous/mech abortion. In case it isn't clear, I consider the process to be stupid. Nike.
    • How much does the shifter move when the car is in gear with the engine off? If it is more than about 1cm you need to replace your shifter bush. Your shifts will just get crunchier, not faster, with a short shifter unless you also rebuild the whole box
    • I should video mine, will prob do it tomorrow    Between 1st and 3rd, you could fit another two gears. That is how loose and wobbly it is   horrible:(
    • Throws on the FS5R30A in most Nissans of this era are actually quite short and direct compared to any remotely modern BMW with the S6-53 transmission. Those things have throws a mile long with rubbery vague everything. Synchro issues combined with a short shifter is just going to break everything even faster.
    • Only thing I'd add...is on recommendation from a good diff shop, I've used mineral oil in my diff including the race car for years. The synthetics can be too slippery and glaze the gears
×
×
  • Create New...