Led Drive Lights, What Do You Guys Think Of Them?
Announcements
-
Similar Content
-
Latest Posts
-
By Desean Strickland · Posted
Hey guys looking for a second opinion before I send my haltech platinum pro ecu to haltech for testing. basically my platinum pro ecu in my r33 gtst was working fine up until a few days ago. The ecu power supply cable is reading 12v with the ignition on but the ecu doesn’t turn on, the lights on the ecu don’t light up and I can’t connect to it via my laptop. bit of context, the engine is out of my r33 at the moment as I’m rebuilding it. I installed a walbro fuel pump a few weeks ago and did the relay wiring mod along with it. All worked fine, the fuel pump was priming when I turn the key and ecu was working. Just recently I pulled the pump again to upgrade the factory fuel pump top hat plug to bulk head terminals, kept the rest of the wiring the same. After finish that and trying to prime the pump it wasn’t working, that’s when I found the blue ecu signal wire for the fuel pump wasn’t putting out any voltage, looked at the ecu and found it wasn’t turning on. seeing as the ecu is getting 12v but isn’t turning on I’m guessing that really only leaves the ecu as the fault but thought I would ask anyway, maybe I’m missing something. cheers for any help. -
By Cummins-907 · Posted
Picked up a 98 skyline GTX-T with the RB25DET paired with a 5 speed manual. Looked up the Vin says 25GT-X Turbo (series 1). -First question is what is the best way to find out what series RB25 it is whether series 1, 2 or NEO it's missing the plastic cover on top of the engine and I've been told it is a NEO I'm looking to make 5-600 hp to start but the more the better its going to be a street / drift car with the occasional drag events for fun What should I be looking for to achieve this goal, a build list would be great and helpful. So far I'm looking at -plazmaman short runner intake 6 or 12 injector -artec exhaust manifold with probably a Garrett 3660 reverse mount (Would like to do antilag on a button with a bigger turbo) -haltech 2500 ecu with the screen the replaces the triple gauge pod in the center I am in the US and have a 10-15k USD budget any help, insight or suggestions is appreciated -
Will be good to see how this goes! One suggestion with the Mines ROM tune, you should get it on a dyno and check it is safe before you push the car hard.....you never know what was done in there and for what fuel....
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now