Jump to content
SAU Community

Recommended Posts

So I've been really slack and not updated this for a very long time. So much has happened with this car over the last 6 months i really dont know where to start.

There has been a workshop change due to the setup not originally performing the way i wanted. Few new parts were added

Turbo change from MTA 80mm ti a PTE 6870 GEN II

New Trigger kit setup

matching 270 Tomei cams.

Overall the setup was much more suited and all components working well. Car went 672rwhp @ 31psi through the auto. 

 

Now for the photo dump, apologies I will try and keep these in order as much as i can,

  • Like 2

Few snaps from my mate on the drive home from the workshop after the new tune. Safe to say it was an awesome feeling getting to drive it after such a long road

 

007ED97A-6157-4B3B-89EF-5273C0505F57_zps

FBCA2367-CE40-4C11-A791-310840845391_zps

 

Even the local Police wanted in on the cruise

D24F6EE3-A506-4298-AD36-834793526975_zps

  • Like 1

Next piece of the puzzle was getting my drag wheels to fit. I already had rust issues in the rear arches on this car so cutting them up didnt faze me too much. I bought some Carbon 400r style flares to go on once the guards were cut.

63E2286D-92FB-434E-B02C-F3FFA7FC481E_zps

AC664E06-7672-4686-94FD-AED0237D2B1E_zps

AEEDCB2D-4CD0-43DE-83DF-A5EF9E30447F_zps

 

Finish product is here. I thouht a black CF flare would suit the setup but i actually dont like it. So in time i will get them paint matched white to the car.

 

53DF68CF-65B8-4016-B6A1-015E904D5816_zps

EC757C3F-F4DD-43BF-B0E5-E44CB105C695_zps

8BAA4E36-A2BA-4A9D-B28F-BE51D7BB95C2_zps

 

  • Like 2

I picked up some new street wheels this week. Panasports G7 C5C's in 17x10 +17 all round. Normally not something you can get away with on a GTST but with the GTR front end and the flared rear guards I thought they would be pretty bang on for fitment. 

997EB1CD-6D49-4D01-BE59-5364606158CF_zps

07089010-B77D-4F13-9FE0-1FD201F52D9B_zps

40850280-5EE2-4081-9CFF-24C99F394CD5_zps

DDB3132A-ED18-4A07-BA9C-3C67181614B8_zps

9A1BDA45-749F-4626-990E-F7B71E30221F_zps

2BE2FB2B-0D8A-4E6E-A455-584D39CF78F7_zps

  • Like 1

One thing I've forgotten was the digital dash. After selling off the Motec C127 before install to fund other mods, I still needed something to get reads on all the sensors ive had installed and I only had the limited stock cluster to go off. I dodnt want to spend 2k plus on getting a Motec or Racepak etc install so looking into cheaper options. Enter the Microtech LTC Dash, small 5 " LED touch screen dash for a fraction of the price. I paid $675 for the Dash plus the GPS & CAN Hub module. Microtech get their fair share os stick in some circles, however i can fault this dash for functionality and looks. Small enough to sit on the steering column & black blacking colour makes its easy to read at night and not blinding .

6 different display screens and warnings out the wahzoo. I find this is really good bang for buck

 

EF58986C-D50F-46C7-8C6A-79D89F605531_zps

4410DB16-2EE2-4E74-B395-90A7B28C6530_zps

E11EFD85-0778-407B-AFFD-60A7106521E4_zps

 

  • Like 1
  • 2 weeks later...
On 06/01/2017 at 5:03 PM, T04GTR said:

i was looking at those rims on gtr and gtr parts...... nice. how do they go with a 275 mt on them?

 

Im not using MT's on these. I use a daily 275/40 on them though which is find. Mint scrub on front at times

On 06/01/2017 at 8:15 AM, GH05T said:

yay for panas

Yeah they are a nice looking rim

I've also been weighing up buying a trailer over the last few months as its starting to see a lot more events and trailering it there and back is becoming the easier option. After a bit of hunting we found a Tilta airbag trailer in Gladstone QLD for the right price. So off we went on a road trip from Brisbane and back in a day for it. Few pics from the drive up and of the trailer itself. Used a mates Falcon ute for the trip aswell 

 

3E1FEB60-EE9E-4476-9A09-14F02B8D5691_zps

D0B1A543-E480-4A04-8986-D6B07F8B4ECB_zps

B098F68C-3AE8-407C-ACF4-B9B9498C6EF3_zps

123D95EA-8D3E-47E3-83FF-B8C8BF768532_zps

C542CBC6-F792-4328-962E-CEA94697F037_zps

First real test for the car and the trailer was last Saturday night for Roll Racing Brisbane's first event of 2017. Put the big tyres on, loaded up the trailer and away we went. Here's a few pics from the event.

8AE1DB32-4B29-4E93-9888-88DA40A6AB7B_zps

34031463-74A5-4659-AA81-407D8FD13AA9_zps

34031463-74A5-4659-AA81-407D8FD13AA9_zps

4FC1B266-EC86-496D-A8BD-9AAA68969790_zps

AA7B929B-0D3F-44B8-B035-5E1E61341AAD_zps

  • Like 1

As 1320 were in Aus for Summernats. Kyle@1320video made his way up to brisbane and came out to Roll Racing to record some footage. 

 

Highlight of the night by far was getting a call out from Kyle @ 1320 and the Forza Horizon R32 GTR for a race. Forza car is a 2.8L stroker and was making a bit over 700awhp on the night. Here is a few videos of the run. One from pit wall and one in car.

 

 

  • 4 weeks later...

Hit up another even on Sunday which was Cruise Fest at lakeside. Mainly cruise sessions with 1/8th mile drags in between. Was a mint day out, street car'd it there and back. Only casualty for the day was my 400r flares. both came off when then fouled on the big wheels round corners. Zero f**ks given. Still raced for the rest of the day without the arches

 

E9254DA8-74D5-4389-864C-10FFDAE0FBF8_zps

AAD49A66-496D-4F61-8CBE-A1E7BF2133C4_zps

7A03E0BA-F2A1-4308-81E3-BE4B80E7EC77_zps

FB7CD9CB-B6B8-45A2-81E2-07F2AA755B8C_zps

E404FEEB-E6CB-4208-A425-CA0B65DBA8E4_zps

3C6541C3-C399-4467-82AD-F4A9A8910B49_zps

5B603AE4-8109-42E2-967F-F0B33B1A6864_zps

  • Like 1
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Gday, Due to not finding much up to date info on this topic I thought I'd make a thread to get peoples latest opinions/recommendations. Background info -  I've got a S1.5 R33 GTST as a fun project car, mainly for street use and occasional drag strip, apart from all the cosmetic things I'll be doing a full rebuild of the engine with forged internals. Since it'll be getting new cams (kelford) and springs to match I thought I might as well get new lifters and valves while I'm at it, the dash says 160k KMs but the engine seems pretty tired, compression measures about 130psi across all cylinders so I'd like to freshen everything up. This is where I'm tempted to just fork out the extra and go solid lifters while it's all apart, aiming for 400-450kw atw with a flex tune. Assuming all supporting mods (oiling, fuel and all bolt ons) with a lightly ported head and turbo to match (yet to make a decision possibly gtx3582r or similar from Hypergear) I've seen the Tomei kits with just the buckets getting around, Supertech sells most things - Supertech High Performance Cam Followers | Trusted Racing Cam Followers Questions -  Has anyone found the Hydraulic lifters to limit them at this power level? Is it usually found that you can just clean the stock lifters and find they work fine?  Does going solid lifters save any headaches/issues with hydraulic lifters in the future? Any recommendations on other things that will need to be replaced, I know I'll need to get the solid profile cams but can you use the same type of valves and springs/retainers and is it recommended to change the guides and stem seals?    Summary -  Basically looking for pros/cons and wanna know if I'll actually need the extra RPMs from solid lifters or it'll just be bragging rights to say it ReVs OvEr 8000 Cheers
    • Ha ha ha, this stuff they had was installing Toshiba PLCs that were made some time in the 1990s, and they were replacing GEM80 PLCs. To let those two talk (staged upgrade along a ~1.2km long building that was split into 4 sections), was a bunch of WinXP machines running Java gateways... There was no way to put something like ProfiSafe in... Most of the HMI machines were WinXP, with Java program, with a custom button board emulating a keyboard... About the only buttons in the operator stations that went direct to the PLCs was the eStop. There was some interesting design stuff in that place...
    • Stock bypass valves are good for plenty of boost.
    • Check for fuel flow out of the outlet end of the rail. Check for spark. Try to start with aerostart (or pressure can brake cleaner or similar solvent in a car) prayed in through TB. If you have fuel and you have spark and it will fire on substitute fuel, then seriously suspect that E85 sitting for ages in your fuel system has destroyed something and put it in your injectors.
    • Nissan stock oil pressure is typically about 1 bar at 1000 rpm plus about 1 bar per thousand revs on top.
×
×
  • Create New...