Jump to content
SAU Community

Recommended Posts

i just finished my 2years in the army and im currently a 20yo international student in perth and im gettin my P's soon. Do you think its a good idea to have a skyline for a first car? Whats the diff between a rear wheel drive and four wheel drive?

Is it better to buy my car from private sellers or dealers?

Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/29031-just-some-questions/
Share on other sites

Hello and welcome.

for a first car a skyline is awsome.depends on how much dollars you have. you can pik up a nice R32 GTST for arounr 15 - 18 grand.

They also come in 4WD ( GTS4 Version , also turbo ).

but the normal GTST is RWD. the only differnce i would say is 4WD would be a bit faster and would handle better , but cant do burnout :P . and the RWD would be more dangerous , unstable in the wet i suppose. but its all up to personal preffernce and also comes down to the $$.

Thanks, hope this helpd

Hi xsoulx, welcome to aust and SAU.

I highly recommend you go out and test drive a few cars. At the end of the day, what one person thinks is awesome, another may think is average.

Rearwheel drive: only the back wheels are driven by the engine

fourwheeldrive: all 4 wheels are driven. with the attesa (nissan 4wd system) they are not constant 4wd, like the subaru are. the 4wd comes on when slip is noticed on the back wheels by a computer.

4wd generally will mean you can get off the mark quicker when taking off, also gives you a pretty big advantage in the wet, and was where the GTRs really came home when they competed in the touring car championships here is aust.

Skylines are great cars for all people. As with all people who are just starting to drive, know your limits, and dont think you are Micheal schumaker just because you have got your liscence for a few months and you should be fine. Its the driver that makes a car dangerous, not the car.

As for buying, make sure you get the car checked out thoroughly before you put a deposit down if you are buying private, and if you are buying from a yard, make sure they have aftersales backup and service.

You get more car for less when you buy private, but you can get good backup and piece of mind from business - they choice is yours.

4WD is faster how exactly?

in the wet and off the mark im imagining :)

soul, brother, theres no "good" or "bad" time to buy any type of car. if you can afford it - buy a fast european car! porsche 911, e46 M3, ferrari 355...whatever!!! you only live once dude :) the only reason why im not driving one is because i can't afford one :) so i drive fast japanese cars instead - which are cheaper :)

gets the power to all 4 wheels - 4 wheels pushing the car forward instead of 2 - faster off the line. that and the 4wd means GTR -->twin turbo --> more power

I think you need to learn more about how cars work. Not to mention why exactly a GTR has more power than a GTS-t. (hint: it's not specifically because it has an extra turbo)

hey gents, settle down, we've all had to learn these things at some time.

And for the newer members posting here, please keep in mind, if you are not *certain* of something...don't post as though it is fact. Other ppl may take what you say as gospel...

hey gents, settle down, we've all had to learn these things at some time.

And for the newer members posting here, please keep in mind, if you are not *certain* of something...don't post as though it is fact.  Other ppl may take what you say as gospel...

I don't have a problem at all with people that don't know stuff. I am more than willing to give advice and help where needed, in fact I like helping people :) But you covered what I have a problem with in your second paragraph - if I'm not sure of something I'll either say I'm not sure or say nothing at all. I don't go around saying things as fact that are obviously incorrect.

One thing that hasn't been mentioned here is that a person on P Plates is banned from driving a GTR by the RTA, hence the reason I bought my GTR at 21. This is the case in VIC, cannot comment for WA. You can ask the RTA to fax you a list of the 'banned' cars list.

But bottom line is that it's only illegal if you get caught and at a guess 2% of traffic cops could tell the diff between GTR / GTST. So go the R! U wont regret it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good afternoon Team , just a quick update on performance mods  Current Mods list (Installed) HKS - Power Editor (Came with the car) looks to be some kind of boost controller RV37 Skyline 400R (SKYLINE) | FUJITSUBO  - Cat Back  RV37 Skyline 400R (SKYLINE) | FUJITSUBO  - Front Pipe AMS  - INFINITI Q50/Q60 RED ALPHA COLD AIR INTAKE KIT AMS  - Performance Heat Exchanger Intercooler Not Yet AMS Alpha Performance Full Race Down Pipes  - to be installed in May 
    • I'd be installing 2x widebands and using the NB simulation outputs to the ECU.
    • Nah, it's different across different engines and as the years went on. R32 era RB20, and hence also RB26, the TPS SWITCH is the idle command. The variable resistor is only for the TCU, as you say. On R33 era RB25 and onwards (but probably not RB26, as they still used the same basic ECU from the R32 era), the idle command is a voltage output of close to 0.45V from the variable resistor.
    • It's actually one of the worst bits of Nissan nomenclature (also compounded by wiring diagrams when the TCU is incorporated in ECU, or, ECU has a passthru to a standalone TCU).... the gripe ~ they call it the TPS, but with an A/T it's actually a combined unit ...TPS (throttle position switch) + TPS (throttle position sensor).... ..by the looks of it (and considering car is A/T) you have this unit... https://www.amayama.com/en/part/nissan/2262002u11 The connector on the flying lead coming out of the unit, is the TPS (throttle position sensor) ...only the TCU reads this. The connector on the unit body, is the TPS (throttle position switch) ...ECU reads this. It has 3 possible values -- throttle closed (idle control contact), open (both contacts open, ECU controls engine...'run' mode), and WOT (full throttle contact closed, ECU changes mapping). When the throttle is closed (idle control contact), this activates what the patent describes as the 'anti stall system' ~ this has the ECU keep the engine at idling speed, regardless of additional load/variances (alternator load mostly, along with engine temp), and drives the IACV solenoid with PWM signal to adjust the idle air admittance to do this. This is actually a specific ECCS software mode, that only gets utilized when the idle control contact is closed. When you rotate the TPS unit as shown, you're opening the idle control contact, which puts ECCS into 'run' mode (no idle control), which obviously is a non-sequitur without the engine started/running ; if the buzzing is coming from the IACV solenoid, then likely ECCS is freaking out, and trying to raise engine rpm 'any way it can'...so it's likely pulling the valve wide open....this is prolly what's going on there. The signal from the connector on the flying lead coming out of the unit (for the TCU), should be around 0.4volts with the throttle closed (idle position) ~ although this does effect low throttle shift points if set wrong, the primary purpose here is to tell TCU engine is at idle (no throttle demand), and in response lower the A/T line pressure ... this is often described as how much 'creep' you get with shifter in D at idle. The way the TPS unit is setup (physically), ensures the idle control contact closes with a high margin on the TPSensor signal wire, so you can rotate the unit on the adjustment slots, to achieve 0.4v whilst knowing the idle control contact is definitely closed. The IACV solenoid is powered by battery voltage via a fuse, and ground switched (PWM) by the ECU. When I check them, I typically remove the harness plug, feed the solenoid battery voltage and switch it to ground via a 5watt bulb test probe ; thing should click wide open, and idle rpm should increase... ...that said though, if it starts & idles with the TPS unit disconnected, and it still stalls when it gets up to operating temperature, it won't be the IACV because it's unused, which would infer something else is winking out...  
    • In the context of cam 'upgrader' I mean generally people who upgrade headers/cams - not my specific change. I mean it makes sense that if I had a bigger cam, I may get more false lean readings. So if I went smaller, I'd get less false lean readings. To a point where perhaps stock.. I'd have no false lean readings, according to the ECU. But I'm way richer than stock. My bigger than normal cam in the past also was giving false rich leanings. It's rather odd and doesn't add up or pass the pub test. Realistically what I want is the narrowbands to effectively work as closed loop fuel control and keep my AFR around 14.7 on light sections of the map. Which is of course the purpose of narrowband CL fuel control. So if I can change the switch points so the NB's target 14.7 (as read by my WB) then this should be fine. Haven't actually tested to see what the changed switchpoints actually result in - car needs to be in a position it can idle for awhile to do that. I suspect it will be a troublesome 15 min drive home with lots of stalling and way too rich/lean transient nightmare bucking away for that first drive at 2am or whevener it ends up being. Hopefully it's all tune-able. Realistically it should be. This is a very mild cam.
×
×
  • Create New...