Jump to content
SAU Community

EOI: Group Buy Alarms> EziTRAK GSM/SAT Monotoring


meshmesh
 Share

Recommended Posts

I've spoke to the company that makes EziTrak & they are willing to give us a discount on their EziTrak Alarm Systems. Fitted the system retails around the $1350-$1450. If we order 5 $1120 fitted, or $1070 for 10. Doesn't matter what state, as they have dealers in all states. So far, I know they can arrange a demonstration for Melbourne & Sydney, I just have to let them know.

I'm not sure how good these are but, they seem to be the ants pants, any input appreciated. Basically the system operates like a normal Alarm, but has a paging system built around the GSM & SAT networks, so you'll need a sim card for the unit. In then event the car is broken into, you will receive a call or SMS, from there you can virtually control the whole car, including:

Security

- Your vehicle will call and send an SMS:

1. within seconds of ignition detection

2. if the doors are opened

3. if over speed is triggered "good trick, when lending car to someone, & they over speed..just ring them & tell em to slow down :P "

4. the battery voltage is low

Control

- With a simple phone call, you can:

1. check on your vehicle anytime

2. remotely lock and unlock the doors

3. remotely immobilize the vehicle

4. obtain status report over the phone

GPS Tracking

1. locate your vehicle over the phone

2. live tracking with amazing accuracy

3. black box recording playback on a moving map display

Emergency

- Your vehicle will call:

1. Your emergency contact person

2. send an SMS emergency message in the event of a detected emergency

Operating Cost

1. no monitoring fees

Overall, it's like a monitioring system without the fees.

for more info the link to the site is:

http://www.rojone.com.au/bandit/ezitrak.html

If anyones "SERIOUSLY" interested, I'll set up a Group Buy post & work it from there.

meshmesh

Link to comment
Share on other sites

  • 1 month later...

I know someone who is a fitter/dealer for this company. I have one in my vehicle...the system is excellent.

I had a talk to him. Normal retail price is $950 + fitting.

The other thing is that the unit does not come with battery back up. The battery back up add on to the system is an additional $50. The unit is useless without the back up as a thief can cut the main battery power and tow the vehicle.

My friend charges $950 for the unit + $50 for back up and around $250 to fit (depending on vehicle).

He is willing to supply and fit INCLUDING battery back up system for $1100 if he has an order of five units.

He will not fit the unit without battery back up.

He is in Sydney. If you are interested, I will supply contact details. He has a system in his vehicle which he can demo for you.

Link to comment
Share on other sites

  • 3 months later...

hi, just read your posting about the ezitrack gsm/sat monitoring - you mentioned that you knew someone that installs them - can u pass on the details onto me?

I heard that there was a new version that has been released with a serial upgrade port, do you know anything about that"?

Also you need to purchase mapping software - did you buy this when you got your system installed and how much it cost if you know?

Thanks

Link to comment
Share on other sites

  • 5 weeks later...

Hi,

I actually work for Rojone, im one of the sales guys.

Quick note, we sell the EziTrak basic kit for $985.00 with backup battery now, not inc. installation, which is $295.00. The fitters are mobile and will come to you, if your in Sydney, they have good experience too, i trusted them enough with my rx8. If your in another state we can still arrange installation quite easily.

Rojone is now working with another company called satrak, you can find more info on this on the website: www.satrak.com.au

We have joined with this company so we can also offer a monitored system, which insurance companies seem to prefer.

If anyone has any inquires or would like one of our price lists, you can contact me on my e-mail address: [email protected]

Take it easy.

Rob.

Link to comment
Share on other sites

Hi,

I actually work for Rojone, im one of the sales guys.

Quick note, we sell the EziTrak basic kit for $985.00 with backup battery now, not inc. installation, which is $295.00. The fitters are mobile and will come to you, if your in Sydney, they have good experience too, i trusted them enough with my rx8. If your in another state we can still arrange installation quite easily.

Rojone is now working with another company called satrak, you can find more info on this on the website: www.satrak.com.au

We have joined with this company so we can also offer a monitored system, which insurance companies seem to prefer.

If anyone has any inquires or would like one of our price lists, you can contact me on my e-mail address: [email protected]

Take it easy.

Rob.

Interesting, particularly the monitoring service (personally I want someone looking out for my car when I am asleep / mobile is off / etc). How do you think your system compares with that of say Telematics or Quiktrak?

Lucien.

Link to comment
Share on other sites

Hey All,

I cant even log out of this name and get my own, somthing weird is happening. Im pretty sure its not an issure with the computer.

Anyhow, ill answer your questions.

Quicktrak had its limitations in range, they used RF triangualtion to find your vehicle, get it past certain suburbs and it doesnt work anymore. Im using past tense becuase as far as i know they are not selling anything at the moment as they went into voluntary liquidation.

Telematics, the Thales Orchid system is hard to find good info on, i have been told my a Merc dealer that it doesnt offer the ability to disable the vehicles engine. As for the rest i am unsure. Their webiste doesnt appear to be working too well.

Link to comment
Share on other sites

adrian , when i wanted a tracker i looked around and i found ezytrack to be the best at the time ( 9 months ago ) i dont know what the others have to offer now but forget quiktrack , its the worst one around , no cover outside sydney metro . give this guy a ring ( i'll pm you his number ) and he can tell you better than me . check your pm .

cheers

Link to comment
Share on other sites

  • 3 weeks later...
  • 4 months later...

jsut decided to dig up an old thread and ask how poeople are finding the EziTrack system...also wat kind of simcard do u need...?pre-paid work or how does it all work...also does it include an alarm or do u need that seperatly?

cheers mark

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share



  • Similar Content

  • Latest Posts

    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
    • You can just get the injector bosses, which allows top feeds to fit. He can use the same injectors without issue, like these (another option): https://rocketindustries.com.au/af59-2210-rb25-fuel-injector-inserts     The Racework ones look a bit better: https://www.nzefi.com/product/raceworks-lower-injector-mounting-boss-kit-for-r33-rb25det-s14-s15-sr20det/   You could also just get a similar kit like the Radium one by Plazmaman: https://plazmaman.com/product/nissan-rb25det-r33-billet-fuel-rail/?srsltid=AfmBOoogfYq49X0fu2Wdbf8yOf6zt9egyPAif_gn3Qr3G8hzAphhTgOkO70  
×
×
  • Create New...