Jump to content
SAU Community

Recommended Posts

Hey all,

I am new to this forum as I have just bought a skyline after being a rotor boy for the past 5 years.

I have purchased a r34 gtt manual jap import. It seems to make a noise when the car starts up... but then stops after about 5 seconds.

The noise sounds like the hood is open and the metal stand is making the noise... if that makes sense.??

I have seen that ppl are using wd40 and replacing the belts etc... would this just be a belt related problem??

cheers,

Nick

Link to comment
https://www.sau.com.au/forums/topic/290919-squeaky-noise-in-r34-gtt/
Share on other sites

What kind of noise is it?

Is it a squeal?

Is it a clatter?

Does it not happen when the car has been warmed up?

Without knowing more info, it might just be a belt. In that case, you can spray just a little WD40 on one belt and see if it stops. Stop the engine > start it again > see if it's silent. The WD40 is just a temp measure > check and replace the belt if necessary (if it's cracked, frayed or not sitting flush in it's pulleys.

If it's a clatter, you can get a 30cm wooden dowel and put one end on parts of the engine (with the other at your ear). Valve lifters?

Congrats on your purchase. How long ago did you take ownership? Was it a dealership? If it was & it's recent, could they look at it for you?

Hey its a squeel... and it only come on when i start the engine for 3 secons or so...

I believe it is a belt related problem.. mayb loose or old? but im worried because it goes away and doesnt come back until i start it again..

(I guess thats a good thing :mrt: lol...)

Generally only happens when car engine is alwready warm... ??

Hey.. nah its not an armarold problem cos he didnt shine it up or anything...

One of the belts seems loose.. possibly the timing belt? the top one of the r34 ... ?

A mate of mine said it could be a water pump bearing... ? any help guys.. it only stays on for a small time then goes until i start again..

seems like when i start it up the volt meter Fluctuates with the noise then stays stable... could this imply that the alternator belt could be loose??

help plz. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • Just planning to have the wiring neat and hide as much as possible.
    • The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
    • Despite having minimal clothing because of the hot weather right now, I did have rubber gloves and safety glasses on just in-case for most of the time. Yes, I was scrubbing with my gloves on before, but brushing with a brush removes the remaining rust. To neutralize, I was thinking distilled water and baking soda, or do you think that would be overkill?
×
×
  • Create New...