Jump to content
SAU Community

Recommended Posts

Hi All,

Had my 10k service done yesterday........... the guys at Von Bibra (Gold Coast) were excellent, had a good chat to me before and after they serviced the car. Total cost was $570 which i thought was OK.....

Phil (my service guy) did tell me that my front tires were shot (inside edge) and my backs were almost down the the legal makers as well as the inside edge was gone (I have done 1 track day). Overall I was very happy with the level of service and will continue to drive the 2 hours each way for my next service

Cheers

Mark

Link to comment
https://www.sau.com.au/forums/topic/290952-10k-service/
Share on other sites

Rather than start a new thread I will highjack yours Mark...sorry.

I had my 10k service done yesterday, I had it done a couple of thousand Km's early because I wanted to get them to change out the transmission fluid and diff fluid.

Here is the long and the short with a breakdown of costs:

Total Service $499.50.

They replaced the standard trans and diff oil for me with Willall oils. $94.00

10,000km service labour $94.00

Engine Oil 6L $112.05

Here is the killer Replacement bolts for undertray $115.00 (Because I asked for the diff and trans oils to be done they had to drop the tray off and hence Nissan policy of replacing all Bolts.

Overall the $500 for the service is quite good, MacArthur Nissan at Campbelltown even picked my car up and dropped it back in the afternoon.

Very happy with the service.

So the result of the service is as follows:

Willall Trand and Diff fliuds are awesome, after a number of track days and this car as my everyday driver I know how it used to be, I know when it would clunck etc. Now it is perfect, smooth changes, no clunking. People have said this before but I will reiterate, get these oils and even if you car is only got 500km on it, replace the oils with the Willall stuff.

The service also had a down side, my brake pads are shot, the bonding of the pad to the plate is breaking down, there are cracks in the pad and they need replacing. According to Nissan's policy I should also replace the disks, this is after 8,000km.

Anyhow I have new pads coming today and will have them fitted next week. Nissan claims that the track work with excessive heat has caused this, I call BS but gives me an excuse to buy the new pads.

Tyres are also fairly well shot, I will get them replaced next week with the Dunlops.

So there you go, summary of ownership costs after 8,000km are:

Willall Fluids $1,000.00

Nissan Service $500.00

Brake Pads $478.00

Tyres $2,600.00

Total: $4,578.00

(Excludes Track adjustments and Mid pipe)

Thought others might find this useful when working out their servicing costs.

Link to comment
https://www.sau.com.au/forums/topic/290952-10k-service/#findComment-4867982
Share on other sites

Rather than start a new thread I will highjack yours Mark...sorry.

I had my 10k service done yesterday, I had it done a couple of thousand Km's early because I wanted to get them to change out the transmission fluid and diff fluid.

Here is the long and the short with a breakdown of costs:

Total Service $499.50.

They replaced the standard trans and diff oil for me with Willall oils. $94.00

10,000km service labour $94.00

Engine Oil 6L $112.05

Here is the killer Replacement bolts for undertray $115.00 (Because I asked for the diff and trans oils to be done they had to drop the tray off and hence Nissan policy of replacing all Bolts.

Overall the $500 for the service is quite good, MacArthur Nissan at Campbelltown even picked my car up and dropped it back in the afternoon.

Very happy with the service.

So the result of the service is as follows:

Willall Trand and Diff fliuds are awesome, after a number of track days and this car as my everyday driver I know how it used to be, I know when it would clunck etc. Now it is perfect, smooth changes, no clunking. People have said this before but I will reiterate, get these oils and even if you car is only got 500km on it, replace the oils with the Willall stuff.

The service also had a down side, my brake pads are shot, the bonding of the pad to the plate is breaking down, there are cracks in the pad and they need replacing. According to Nissan's policy I should also replace the disks, this is after 8,000km.

Anyhow I have new pads coming today and will have them fitted next week. Nissan claims that the track work with excessive heat has caused this, I call BS but gives me an excuse to buy the new pads.

Tyres are also fairly well shot, I will get them replaced next week with the Dunlops.

So there you go, summary of ownership costs after 8,000km are:

Willall Fluids $1,000.00

Nissan Service $500.00

Brake Pads $478.00

Tyres $2,600.00

Total: $4,578.00

(Excludes Track adjustments and Mid pipe)

Thought others might find this useful when working out their servicing costs.

No problems did the quote for your tires come from the dealer.......... the boys at Von Bibra quoted me (Dunlops) about 900 each for the rears and high 7 low 8's for the fronts

Cheers

Mark

Link to comment
https://www.sau.com.au/forums/topic/290952-10k-service/#findComment-4868131
Share on other sites

Gibbo did the guys at Nissan say there were any warranty implications about you not using their transmission fluid and diff oils?

I mentioned that I would be switching to Willall's fluids and while they were happy to put it in...............they said that i would breach my warranty as I was not using what Nissan specified

Link to comment
https://www.sau.com.au/forums/topic/290952-10k-service/#findComment-4869109
Share on other sites

I went through the oils issue with the service manager when he picked my car up. They said there would be no service issue as long as the oils performed as claimed.

There was no hesitation on my request to use my supplied oils and no mention of voided warranties if I went ahead with it.

I gave the manager all the detail links and he was happy with what he saw.

That being said the story may change if something fails.

Link to comment
https://www.sau.com.au/forums/topic/290952-10k-service/#findComment-4874695
Share on other sites

I went through the oils issue with the service manager when he picked my car up. They said there would be no service issue as long as the oils performed as claimed.

There was no hesitation on my request to use my supplied oils and no mention of voided warranties if I went ahead with it.

I gave the manager all the detail links and he was happy with what he saw.

That being said the story may change if something fails.

It's not the dealer who makes the call if it's warranty or not, that's up to Nissan.

Link to comment
https://www.sau.com.au/forums/topic/290952-10k-service/#findComment-4882542
Share on other sites

Nissan has honoured warranty on Willall Fluid equipped cars in the US. In fact NNA (Nissan North America) have a positive stance on our product with several dealers stocking Willall WR35TM Transmission Fluid as a 'user select' option. Australia should eventually follow suit :devil:

Link to comment
https://www.sau.com.au/forums/topic/290952-10k-service/#findComment-4883913
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
×
×
  • Create New...