Jump to content
SAU Community

Recommended Posts

Hi guys,

i got a completly stock r34 n/a...i was looking at a replacment filter, few questions:

1) can i still do a CAI with a panel filter?

2) is it worth buying this if my car is 100 percent stock?

3) can anyone vouch for this filter?

Cheers.

LINK TO THE PRODUCT IS BELOW:

http://justjap.com/store/product.php?produ...=272&page=1

Link to comment
https://www.sau.com.au/forums/topic/290965-blitz-sus-power-lm-air-filter/
Share on other sites

You can do a CAI using the stock air box. isnt really worth it tho.

No idea about the filter from justjap,

But I can definetly recommend getting an apexi panel filter. One of the best on the market in the amount of air that goes through and the filtering performance.

Was the first mod I done to my NA and I noticed a difference, especially in the top end, more air getting to the engine.

You can do a CAI using the stock air box. isnt really worth it tho.

No idea about the filter from justjap,

But I can definetly recommend getting an apexi panel filter. One of the best on the market in the amount of air that goes through and the filtering performance.

Was the first mod I done to my NA and I noticed a difference, especially in the top end, more air getting to the engine.

thanks for that. how much was the apexi panel filter and where did you buy from?

also, did you need to get a tune due to the air/fuel ratio changing?

http://cgi.ebay.com.au/Apexi-Replacement-P...id=p3286.c0.m14

where else but ebay.

A little more than the blitz tho.

Nah, no tune required. the stock ecu can handle a few mild mods befroe needing to go a copgy back.

Edited by Grunta

Looks good, but if you include shipping its almost twice the price than the Blitz...i know Blitz is a well known/good brand, so i thihnk ill stick with that...unless somone tells me there craphola lol

I had good results with the K&N Panel. Easy to source one too.

R34's aren't too bad for getting air into the air intake with the snorkel. Cold air feed will always help with getting coldest possible air to the engine. Remembering with an N/A the aim is to remove the restrictions as much as possible (doing so with the filter) and then cooling the air with the cold air feed to make the extra power.

I never set up an additional cold air feed, though if the cooler night air performance was anything to compare to, it would be well worth it!

You could run a cold air feed from behind the front bar up into the cold air box, use something like a flexible tube. That way you'll get cold air into the air box and still have the heat resistant properties of the factory airbox.

You'll have to go beyond CAI, Extractors, Cat-Back before you'll need a copgy back. The R34 relearns quite well. If anything, just reset the ECU afterwards by disconnected Neg terminal on the battery, put foot on brake for 10 seconds, reconnect, then let the ECU relearn your driving style.

I had good results with the K&N Panel. Easy to source one too.

R34's aren't too bad for getting air into the air intake with the snorkel. Cold air feed will always help with getting coldest possible air to the engine. Remembering with an N/A the aim is to remove the restrictions as much as possible (doing so with the filter) and then cooling the air with the cold air feed to make the extra power.

I never set up an additional cold air feed, though if the cooler night air performance was anything to compare to, it would be well worth it!

You could run a cold air feed from behind the front bar up into the cold air box, use something like a flexible tube. That way you'll get cold air into the air box and still have the heat resistant properties of the factory airbox.

You'll have to go beyond CAI, Extractors, Cat-Back before you'll need a copgy back. The R34 relearns quite well. If anything, just reset the ECU afterwards by disconnected Neg terminal on the battery, put foot on brake for 10 seconds, reconnect, then let the ECU relearn your driving style.

thanks, that helped a lot, could you give me a part number or name of your k&n filter? also, how much did you pay?

Hey mate no probs, happy to help :cool: I can't remember the part no, I went to a shielded Apexi Pod filter when I done the conversion and the R34 GT airbox wouldn't have worked out. It should be on K&N's web site? I think I paid around $70-80 for it? was retail price put it that way, I just took out the compliance filter pretty much straight away lol

K&N Products will suggest you oil the filter up.

That's just so the oil will catch smaller particles from going into your air intake.

You don't have to oil it up, but a light spray (Do Not Soak It) on the filter won't hurt either.

K&N, APex'i, Blitz ect will be good upgrade for your air filter.

+ you might as well find a decent 2.25" / 2.5" full exhaust + extractors and a high flow cat to help out the car.

http://cgi.ebay.com.au/Apexi-Replacement-P...id=p3286.c0.m14

where else but ebay.

A little more than the blitz tho.

Nah, no tune required. the stock ecu can handle a few mild mods befroe needing to go a copgy back.

The Blitz Panels are FAR superior to Apexi IMHO

Hi Owen, thanks for your order.

Direct Deposit payments usually take 1-2 business days to clear and reach our account, after which your order will be dispatched.

Delivery time to Victoria is also usually a couple of business days :)

If you have any further questions, please don't hesitate to ask.

Cheers,

Steve

Hi Owen, thanks for your order.

Direct Deposit payments usually take 1-2 business days to clear and reach our account, after which your order will be dispatched.

Delivery time to Victoria is also usually a couple of business days :)

If you have any further questions, please don't hesitate to ask.

Cheers,

Steve

Hi Steve.

Thanks for that, i now know what i needed to know!

Regards,

Owen.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You know, that is exactly the thing that I was thinking a coupe of hours ago. I even had a plan for a meme, involving one big one, another big one, and the Old El Paso girl saying "¿por que no los dos?"
    • NoS, 2 of the big ones.
    • Oh, that's grim. Something bad has been happening there.
    • Put an endoscope down the hole and saw this. Not quite all around the bore but a good 60% at least. Chin to the chest and towards further disappointments I guess.
    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
×
×
  • Create New...