R32 Gtr Tunning Help :s

[Rps13]

I have a R32 Gtr and it wont make proper power on the dyno.

I have a power Fc and all the power mods to back it up ( Bigger Turbos, Z32, Fule Pump, Injectors, Ect)

How ever every time its on the dyno it makes a flat 230kw and just dies in the ass.

Not literley it dosen't just turn off but it just stops making power every time at the same point of power yet the turbos arnt braking a sweat their is loads of fule and no apparent problems are coming up on the computer.

Could this be crank angle sensor?

Any other ideas?

Their is no excess smoke or anything like that and right up untill it hits the peak of 230kw it runs fine smooth and like a dream.

[Moodles2]

What's the compression like across the cylinders?

What turbos and how much PSI are you putting through them?

Got cam gears, and what are they set to?

[Rps13]

I dont know the compression all i know is that it has been checked and that its A ok.

No cam Gears

N1 Turbos

I belive about 16 or 17 psi

[Sheriff Wan]

Exhaust blockage?

[MrStabby]

Exhaust blockage?

+1. Drop the exhaust and give it another rip on the dyno

Also, you'll get much better responses if your provide full details of your setup. Help us to help you.

Edit: and post the dyno sheet(s)

[SiR_RB]

could also be your airflow meters?

[R31Nismoid]

As others have said

Exhaust

Drop it from the front pipes, do another run, see what happens.

[R31Nismoid]

also ensure the cam gear/timing is correct.

Im assuming you have a set of cam gears as they are the single best bang for buck mod on the RB26

[Swiper the Fox]

also ensure the cam gear/timing is correct.

Im assuming you have a set of cam gears as they are the single best bang for buck mod on the RB26

post #3 Ash.

[R31Nismoid]

ekk - no cam gears...

cam timing perhaps

[Rps13]

Yes I have tryed taking off the exhaust but their was no majour differences. I don't have any of the dyno sheets handy but I will organize the car to be dynoed again and post a copy of the print out.