S14 With Neo Rb25 Drift Car.

[Simon-S14]

[Simon-S14]

got my turbo back... its brand new! props to MTQ for fast turn around and cheaper then quoted.

also got this mad article!

http://www.driftkulture.com/?p=3090

[on__edge]

fantastic effort building most of it yourself. My new role model

[fairi_neo]

nice build-ups simon....

[Simon-S14]

got my shit back from ceramic coating.... looks the bomb! should work really well!

they used to offer two colours... silver or black with black being rated higher temps... they now have changed it to both colours being rathed the same high temps so naturally i went the silver option because it looks cooler

[R31 POWER]

Nice build up! How do you find the new bushes?

[Simon-S14]

yet to drive with new rear stuff in as ive been waiting on the above ^^^ stuff to be finished... will report back on it soon tho!!

[Simon-S14]

retune this week...changed the gate spring and a few other little things... heres hoping for 320 ish rwkw this time round

[Simon-S14]

UPDATE

Got rear susp bushes and arms all installed.. getting alignment tomorrow. Noticed that on the hoist that my front left tie rod was unthreading out the rack... wtf.. nigles offset spacer had come undone even tho its loktited and done up fkn tight in there... bloody lucky i caught it in time!

got retune today... turns out straight on the rollers i was making 240 rwkw for G1's level of tune.... errrr shit! prob due to timing being out by 6 degrees due to removal and reinstallation of CAS even tho i marked it and put it back in the same spot... weird.

anyway so ran it up. jeff did some fine tuning and sorted out some area's which i wanted improved and we picked up a shit load more torque and lowdown power. total power was 310 rwkw on 17 psi... safe as houses with a 12:1 AFR.

goes goddamn hard now... so much better then the previous times i have driven it so should be a decent weapon soon once everything is sorted!

STILL HAVE NO BRAKES GGGGGGGGGGGGGRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR

[Simon-S14]

skids at a mates private track

[Simon-S14]

Heres some footage i threw together from drift supercup. rear wheel alignment is shocking!

[Simon-S14]

ripped the subframe out to do some mods to it plus raise it up.

[NA_Goodness]

Read the article about the ATC drift team and your old Corrola the other day. Good work mate, looking forward to reading about this one as well.

[Simon-S14]

cheers mate glad ppl enjoyed it...was a good write up overall.

[Simon-S14]

[DJRIFT]

are you putting solid sub frame bushes in? im guessing yes as you have pushed the old ones out.

[Simon-S14]

sure am mate.. check back here in a few days and i'll have pics of them... mate is machining them up for me as i type

[Simon-S14]

got my cazman gear... very high quality stuff... you can see the differences yourself in the comparison shots between the cazman gear and the cusco toe arms and isc/driftshop camber arms.

[Simon-S14]

[Simon-S14]

all in all it fits really well... took me 5-6 attempts to get the subframe up onto the studs evenly as it would catch and then not go evenly. the holes in the bushes are 20.5mm and the studs are 20mm so the extra was to allow for slightly offset studs etc. Bushes were machined so they wack in with a block of wood and hammer.. can come out easy enough if need be. If you lok at the pics you'll see some parts come bloody close to fouling but yeah it all seems to clear pretty well