Jump to content
SAU Community

Recommended Posts

Hey simon what are your thoughts on limiter bashing, my tuner and a fair few people here seem to think it cracks oil pumps and all sorts due to everything getting unbalanced and vibrating, thoughts?

My tuner personally likes just dropping it down to almost 10:1 where the red line is to kill the power and make the engine tend to drop back in revs anyway.

I'm pretty certain that many motors that have died as a result of cracked gears and limiter action were either a) non standard gears b) non standard pumps or c) combo of both and to much clearance.

Stock motors are fine. I've never once cracked an oil pump as a result of limiter in 10 years of drifting. All my motors see plenty of limiter action.

As for tuning it to taper off up top I would never do it. Most engines fall over and start losing power as they near limit anyway so no need to adjust that. If your motor is making peak power right near limit and still climbing then maybe adjust the cam gears a but to bring it back towards the midrange a bit

So that battle went to a re run and who went through?

I'd be interested to know why you didn't get the win off that first battle. To me you pull away out of turn one. Tom Carries less angle then chases you down. But that's with less angle. I would have thought advantage you.

Then your chase lap you emulate his angle and stay the same proximity all

Run. Advantage you.

Or am I missing something?

I see you have dropped the big wing as well. Any reason or just a change?

yeah the general consensus is that i won the first battle and it should never have been rerun...everyone has the same opinion, even tom said i won it haha.. except the judges. when i asked them why they reran it they said that i won my lead lap however on the chase lap they scored it 7-3 in toms favor because i sacrificed angle to maintain proximity... i mean really?!

its stuff like this that makes me wonder why i bother competing

as for the wing.. yeah i got over it. the grip isnt really needed for drifting in fact its more of a backwards step then anything. my car has a lot of mechanical grip as it is. With the wing on and doing 160 into the first corner to enter theres a lot of grip in the rear and it makes it hard to break away.. but once sideways you lose the aero and suddenly you have less grip. makes it feel a tad unpredictable.

yeah the general consensus is that i won the first battle and it should never have been rerun...everyone has the same opinion, even tom said i won it haha.. except the judges. when i asked them why they reran it they said that i won my lead lap however on the chase lap they scored it 7-3 in toms favor because i sacrificed angle to maintain proximity... i mean really?!

its stuff like this that makes me wonder why i bother competing

Whaaat? Maybe for 2 seconds near the end, for the rest of it you were like a ghost of Tom's car! Anyway, top quality driving mate! That's the sort of thing I'm hangin out for in the ADGP at the end of October :D

It's easy to be an arm chair judge but I'm guessing that footage is shot from the judging area making it fair to judge from. There has been quite a few people upset this year from judges calls in the tassy series but where the majority of spectators watch from gives a totally different aspect to what the judges see so they can ony go off what they see. You do seem to get the rough end of the stick with calls thoe. Good driving non the less.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...