Power Window Switch Without Door Card (r33)

[beachside]

does anyone know of good solutions, perhaps by way of replacement switch or mounting nissan switch block without the use of the door card?

any pics of setups would help.

I'm wanting to remove door card for driver seat space and cage, and wondering if anyone can share their solutions if they have kept the power windows in place. id be happy to replace with simple switches but not sure where to start...

appreciate your help, pics also very helpful

kind regards

Bruce

[Marlin]

Mine has the entire original switch simply mounted in the new flat door card. Cut the hole same as the original and push it in. Mine's a 32 so it retains all the mirror functions too. Mine is mounted forward and low, no new wiring required.

I don't have a pic handy sorry mate.

[beachside]

Mine has the entire original switch simply mounted in the new flat door card. Cut the hole same as the original and push it in. Mine's a 32 so it retains all the mirror functions too. Mine is mounted forward and low, no new wiring required.

I don't have a pic handy sorry mate.

thanks mate, I thought that may be what others have done.

what is your door card made from? how thick?

[Marlin]

3mm thick plastic with a thin covering of foam and vinyl. Not flash but does the job.

[Marlin]

** heated and bent into a "U" so it covers up and over the top of the door into the window area **

[badhairdave]

I used 2 of these mounted in the centre console

http://www.jaycar.com.au/productView.asp?I...mp;SUBCATID=401

They are 10 amp rated so i probably could have gotten away with just wiring the window motor direct off the switch but decided to make a new circuit out of 2 5 pin relays for each side to be on the safe side.