Jump to content
SAU Community

Recommended Posts

So with the help of Luke and a few others today we got the gearbox out of my car to try and find out what was behind the bad grinding sounds and gear selecting problems. As soon as the clutch came off the reason for the grinding sound was pretty clear. The clutch centre was rubbing on the bolt heads on the centre of the flywheel. Im not to sure what caused this to happen but im very happy that the clutch didn't explode at the time attack on monday as the result could have been pretty bad.

I'll have a look on here to see what i can find but if anyone has any hook ups with clutches let me know. Gonna go for a twin plate this time round, need some thing thats good for 300kw+

flywheel.jpg

clutch2.jpg

clutch.jpg

Link to comment
https://www.sau.com.au/forums/topic/291411-clutch-fail/
Share on other sites

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Woah! Lucky it didn't let go at the time attack.

Glad to hear you caught it just in time. Didn't look like it would have lasted much long.

and +1 to never seeing a clutch like that before. :)

Link to comment
https://www.sau.com.au/forums/topic/291411-clutch-fail/#findComment-4873255
Share on other sites

Kubos motorsport, do good GENUINE Exedy clutches, all parts branded Exedy, not mix and match crap. Talk to him, very helpfull, good quality and great prices. There are some RB25/30s running these clutches, i'm pretty sure cubes was impressed with his.

Link to comment
https://www.sau.com.au/forums/topic/291411-clutch-fail/#findComment-4873314
Share on other sites

  DSTROY said:
The clutch centre was rubbing on the bolt heads on the centre of the flywheel. Im not to sure what caused this to happen but im very happy that the clutch didn't explode at the time attack on monday as the result could have been pretty bad.

Pretty clear that the clutch centre let go 1st and then bowed out against the flywheel bolts......obviously bolts need to be replaced now regardless if they're still tight.

Seen clutches like that before....usually caused by hard launches or flat changing causing the centre to over flex.....also if it's excessively tight over the splines during release.

Link to comment
https://www.sau.com.au/forums/topic/291411-clutch-fail/#findComment-4873390
Share on other sites

The springs probably bottomed out also, causeing shock loading which made it crack. I'm no expert on clutches but I know my metals, those cracks look like a combination of high temps and shock loading.

I was just saying the other day at vilis that i didn't like those clutches after a bad exerience I had with mine.

Link to comment
https://www.sau.com.au/forums/topic/291411-clutch-fail/#findComment-4873437
Share on other sites

  smithersnt said:
i could probably get you an os for a decent price.

If you could find out that would be awesome, I'm after a twin plate to take 350-400rwkw and lots of track use. Also need it ASAP!

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/291411-clutch-fail/#findComment-4876533
Share on other sites

True twin plates are never going to be as good as a single for very quick gear changes as you're attempting to release 2 driven plates as opposed to 1.

However, we don't have a drag strip and grip racing doesn't require the lightning fast changes that drag racing does, hence why I went for the Coppermix Twin plate......which in actual fact, is not a true twin plate (ie. with intermediate plate) cause it uses a single sprung Boss Drive. The other reason I went this way is cause of the lighter diaphram that you can get away with and still get a greater clamping pressure.

I've never ever liked solid centre style driven plates or the metal button style ones either cause they're not forgiving as a daily driver. Also double diaphram pressure plates used to be the rage years ago but your left calf muscle needs to be bigger that your right, lol. Drivelines also hate these 3 style of setups.

Link to comment
https://www.sau.com.au/forums/topic/291411-clutch-fail/#findComment-4876582
Share on other sites

yeah I had one let go in similar fashion , opened up the pressure plate to find shrapnel inside it on my RX7, Aluminum flywheel / Center force racing clutch

make sure you check the run out on the flywheel, bet it could be borderline to thin?

also check the bearings on the input shaft ,always replace the center pilot bearing, you call it something else in OZ. but it goes into the crankshaft?

good time to swap out the seals on the input shaft as well ?

and if your real bored polish the casing to mirror finish..hahahah

sucks mate but least your floor doesnt have a hole in it from the flywheel

Link to comment
https://www.sau.com.au/forums/topic/291411-clutch-fail/#findComment-4877746
Share on other sites

  sapphiregraphics said:
yeah I had one let go in similar fashion , opened up the pressure plate to find shrapnel inside it on my RX7, Aluminum flywheel / Center force racing clutch

make sure you check the run out on the flywheel, bet it could be borderline to thin?

also check the bearings on the input shaft ,always replace the center pilot bearing, you call it something else in OZ. but it goes into the crankshaft?

good time to swap out the seals on the input shaft as well ?

and if your real bored polish the casing to mirror finish..hahahah

sucks mate but least your floor doesnt have a hole in it from the flywheel

Scopot Bush?!

Edit: Damn word filter, i mean one of these - i bet the word filter messed with the link.

Edited by Aberax
Link to comment
https://www.sau.com.au/forums/topic/291411-clutch-fail/#findComment-4877991
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha luckily we don't have emissions, inspections, or any laws against power adders here. They only thing they somewhat keep an eye out for are ridiculously loud exhausts. 
    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
×
×
  • Create New...