Jump to content
SAU Community

The Sa Wasteland


heslo
 Share

Recommended Posts

Aberax i see your having troubles deciding what clutch to choose..... I highly recommend the same one that i got which was through the group buy that madaz did. I had an R33 GTST with 250 RWKW and i hammered the thing with no problems at all. Before this i went through 2 other clutches. The NPC setup was VERY easy to drive and was capable of a fair amount of abuse :) . Good luck in what ever clutch you choose to go with :)
hi abe im oz pommys dad

we just had his standed flywheel machined the npc clutch worked a treat and had been in the car over 12 months before he sold the car .

it copped a fair hammering in the time he drove ....i mean thrashed it lol . b4 then i had fitted 2 clutches in about 18 months too the car

pedal had good feel and the cluch was good in traffic

cheers dean

Thank you Dean, Allan, and Everyone else that helped. :)

Looks like i shall get the NPC Organic Coppermix, or i may email him asking about the 5puk Ceramic. Its going to be more expensive then the Xtreme, but i suppose you get what you pay for - Poor Man Pays Twice.

Thanks Again

Link to comment
Share on other sites

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

I need to borrow a trailer ... 6x4 or 7x5 sized.

Can anyone help me out? Need it for this weekend, can return it Tuesday. Needs to be registered of course. I'm traveling interstate to pick up a go kart for the little lad.

Can anyone PM me with any loan trailer they can grant me.

:)

Link to comment
Share on other sites

i like to think of myself as a pretty patient guy....

BUT FOR PHUCKSAKES I WANT MY SKYLINE BACK AND FINISHED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Yeah, i know what you mean. Mine has been off the road for 2-3 weeks with a fried clutch, and its going to be about another 2-3 weeks before its good again :)
Ive been waiting since November for my engine. Been driving an R32 with a busted engine since October. I win :cool:
i have had my 31 since october, and only done one skid. depressing.

workshop has had it for >5 weeks. depressing.

i know there was a fair bit of work, but geez, srs?

LOL i don't know what your complaining about, my cars been off the road since march last year and i have only now just started to build the engine.
im in the same boat as you boys but i havnt driven my line in like 6 months :huh:

Oh boo hoo all of you.

I've had my car on the road for less than 12 months since the start of 2006!

Link to comment
Share on other sites

Hey guys,

After finally having run in the engine, i'm looking at getting it tuned

I've got a power fc at home, but been reading a bit about D-jetro recently..

just weighing up my options:

1) Buy Nismo AFM ($800-$900)

Or

2) Sell Power FC, Sell Standard AFM then Buy D-jetro

anyone here run a d-jetro? cons/pros?

Link to comment
Share on other sites

David Blue32 run d-jetro and swears by it for being able to run the car and problem solve air leaks and turbo problems

Abe a NPC ceramic should be cheaper than a xtreme

from memory that price you quoted used to be for his 5puk ceramic maybe he has put his prices up i dont know

Link to comment
Share on other sites

Hey guys,

After finally having run in the engine, i'm looking at getting it tuned

I've got a power fc at home, but been reading a bit about D-jetro recently..

just weighing up my options:

1) Buy Nismo AFM ($800-$900)

Or

2) Sell Power FC, Sell Standard AFM then Buy D-jetro

anyone here run a d-jetro? cons/pros?

If your worried about the $$, why Nismo afm?

Link to comment
Share on other sites

Honestly, if I had my choice all over again, I'd go a Vipec

Hey guys,

After finally having run in the engine, i'm looking at getting it tuned

I've got a power fc at home, but been reading a bit about D-jetro recently..

just weighing up my options:

1) Buy Nismo AFM ($800-$900)

Or

2) Sell Power FC, Sell Standard AFM then Buy D-jetro

anyone here run a d-jetro? cons/pros?

Link to comment
Share on other sites

David Blue32 run d-jetro and swears by it for being able to run the car and problem solve air leaks and turbo problems

Abe a NPC ceramic should be cheaper than a xtreme

from memory that price you quoted used to be for his 5puk ceramic maybe he has put his prices up i dont know

So should i get the Organic Coppermix, or get a 5puk ceramic? I think you posted earlier in this thread i should go ceramic, but just want to reaffirm.

never heard of it? :cool:

any more details?

http://www.vi-pec.com/

Link to comment
Share on other sites

Hey guys,

After finally having run in the engine, i'm looking at getting it tuned

I've got a power fc at home, but been reading a bit about D-jetro recently..

just weighing up my options:

1) Buy Nismo AFM ($800-$900)

Or

2) Sell Power FC, Sell Standard AFM then Buy D-jetro

anyone here run a d-jetro? cons/pros?

Are you maxxing out your current stock AFM's? You'll need nismos only when passing the 300kw mark, and even then you can get your stock AFM's recalibrated to nismo spec for around $275 each...

cost $550 for the pair, however for that to be required you'd also need at minimum n1 turbos and bigger injectors...

-D

Link to comment
Share on other sites

Are you maxxing out your current stock AFM's? You'll need nismos only when passing the 300kw mark, and even then you can get your stock AFM's recalibrated to nismo spec for around $275 each...

cost $550 for the pair, however for that to be required you'd also need at minimum n1 turbos and bigger injectors...

-D

at the moment its standard injectors, with garrett 2860-5's

installing 700cc's when it gets tuned, so i'm sure (it better!!) it will exceed 300kw..

Link to comment
Share on other sites

Abe - my driving style suits a ceramic so personally i would buy ceramic for durability factor, look @ how hard drifters punish there clutches, mine doesn't see any of that so should last a while

btw i have xtreme atm but would happily get a NPC twin if i had the money or just a NPC single if i didnt, i did buy a NPC because mine slipped but then it didn't give me any more grief so i sold it to AM performance and he too loves it like OZ pommy

Link to comment
Share on other sites

Hey guys,

After finally having run in the engine, i'm looking at getting it tuned

I've got a power fc at home, but been reading a bit about D-jetro recently..

just weighing up my options:

1) Buy Nismo AFM ($800-$900)

Or

2) Sell Power FC, Sell Standard AFM then Buy D-jetro

anyone here run a d-jetro? cons/pros?

You still need your Power FC to run D-jetro (I think)

I have D-jetro on my skyline and its runs awesome track and street 324kw no problems.

Edited by DSTROY
Link to comment
Share on other sites

You still need your Power FC to run D-jetro (I think)

I have D-jetro on my skyline and its runs awesome track and street 324kw no problems.

you need a different type of PFC if you're gonna run the Djetro's - the MAP sensors plug directly into them...

regarding the tune, if you get 700cc injectors and get your afm's recalibrated, you'll be seeing 300-350kw with ease (based upon the -5's which are very good turbos)

you may find your afm's leaning the mixture out above 300kw - your tuner will be able to take care of this and inform you when/if you need afm's - I'd say conservatively that you would need them a tad before hitting 300kw.

-D

Link to comment
Share on other sites

ugh. being trained to deal roulette as of today. f**k... such an exhausting game too learn, so much shit you gotta commit to memory. im gonna be knackered by the end of the 2 weeks. lol.

Edited by scandyflick
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share




  • Similar Content

  • Latest Posts

    • That's the most absurd thing I've ever heard. I would go cut bellhousing over that monstrosity of a flywheel all day, every day. It puts a lot more mass further from the last main bearing. I've had nothing but problems with Collins in the past and refuse to ever buy their products again. I would not trust anything they tell you. He's playing his salesman card.  I'm currently at 640whp on a mustang dyno (~770bhp) with the intentions of running E85 and a lot more power this upcoming spring. Cheers, 
    • Nah, it's not the reduced knock margin. It is a direct mechanical effect of having to initiate the combustion earlier, while the piston is still rising, which starts to exert combustion pressure on the rising piston earlier, making the rest of the engine work harder to finish driving the piston up to TDC where the combustion pressure stops being a negative and starts being a positive. Your modern engine that only needs ~10° to make MBT doesn't waste the other 10 or so degrees of crank rotation. That's almost all of it. The difference in knock margin might go either way. Remember that modern engines to which you are currently comparing the long tractor engine (the RB) are now running super high compression, direct injection, tricky cam control and maybe even cylinder pressure sensors. You're not comparing apples with other fruit. It's apples and sea weed, or some other evolutionarily primitive vegetation. And remember, squish only really comes into play at the very end of the stroke. It certainly does good things, but it is not the biggest contributor to what's going on. It is quite possibly much less important in 4 valve head than 2 valvers also, because there is so much less squish available to a 4 valve anyway.
    • Food for thought, a longer stroke motor would need less ignition timing vs. a shorter stroke motor requiring more ignition timing.
    • Thanks Duncan, HART is only 10 mins from me (I did my bike license there), it'd be awesome if it ran these types of things.  Sutton Road does look good and they take fewer cars than SMSP which is good.  Surely you have enough land to lay a few million tonnes of concrete and some sprinklers D? 
    • I thought an engine that needs more ignition timing to make power is going to result in less power due to reduced knock margin? More time for the combustion to propagate -> more time for it to heat up the rest of the mix to detonation.
×
×
  • Create New...