Jump to content
SAU Community

Recommended Posts

i think a mind ponderer is quiet appropriate here :)

God vs Science

'Let me explain the problem science has with religion.' The atheist professor of philosophy pauses before his class and then asks one of his new students to stand.

'You're a Christian, aren't you, son?'

'Yes sir,' the student says.

'So you believe in God?'

'Absolutely. '

'Is God good?'

'Sure! God's good.'

'Is God all-powerful? Can God do anything?'

'Yes'

'Are you good or evil?'

'The Bible says I'm evil.'

The professor grins knowingly.

'Aha! The Bible!' He considers for a moment.

'Here's one for you. Let's say there's a sick person over here and you can cure him. You can do it. Would you help him? Would you try?'

'Yes sir, I would.'

'So you're good...!'

'I wouldn't say that.'

'But why not say that? You'd help a sick and maimed person if you could. Most of us would if we could. But God doesn't.'

The student does not answer, so the professor continues. 'He doesn't, does he? My brother was a Christian who died of cancer, even though he prayed to Jesus to heal him. How is this Jesus good? Hmmm? Can you answer that one?'

The student remains silent.

'No, you can't, can you?' the professor says. He takes a sip of water from a glass on his desk to give the student time to relax.

'Let's start again, young fella. Is God good?'

'Er...yes,' the student says.

'Is Satan good?'

The student doesn't hesitate on this one. 'No.'

'Then where does Satan come from?'

The student falters. 'From God'

'That's right. God made Satan, didn't he? Tell me, son. Is there evil in this world?'

'Yes, sir.'

'Evil's everywhere, isn't it? And God did make everything, correct?'

'Yes'

'So who created evil?' The professor continued, 'If God created everything, then God created evil, since evil exists, and according to the principle that our works define who we are, then God is evil.'

Again, the student has no answer. 'Is there sickness? Immorality? Hatred? Ugliness? All these terrible things, do they exist in this world?'

The student squirms on his feet. 'Yes.'

'So who created them?'

The student does not answer again, so the professor repeats his question. 'Who created them?' There is still no answer. Suddenly the lecturer breaks away to pace in front of the classroom. The class is mesmerized. 'Tell me,' he continues onto another student. 'Do you believe in Jesus Christ, son?'

The student's voice betrays him and cracks. 'Yes, professor, I do.'

The old man stops pacing. 'Science says you have five senses you use to identify and observe the world around you. Have you ever seen Jesus?'

'No sir. I've never seen Him.'

'Then tell us if you've ever heard your Jesus?'

'No, sir, I have not.'

'Have you ever felt your Jesus, tasted your Jesus or smelt your Jesus? Have you ever had any sensory perception of Jesus Christ, or God for that matter?'

'No, sir, I'm afraid I haven't.'

'Yet you still believe in him?'

'Yes'

'According to the rules of empirical, testable, demonstrable protocol, science says your God doesn't exist. What do you say to that, son?'

'Nothing,' the student replies. 'I only have my faith.'

'Yes, faith,' the professor repeats. 'And that is the problem science has with God. There is no evidence, only faith.'

The student stands quietly for a moment, before asking a question of His own. 'Professor, is there such thing as heat?'

'And is there such a thing as cold?'

'Yes, son, there's cold too.'

'No sir, there isn't.

The professor turns to face the student, obviously interested. The room suddenly becomes very quiet. The student begins to explain. 'You can have lots of heat, even more heat, super-heat, mega-heat, unlimited heat, white heat, a little heat or no heat, but we don't have anything called 'cold'. We can hit up to 460 degrees below zero, which is no heat, but we can't go any further after that. There is no such thing as cold; otherwise we would be able to go colder than the lowest -460 degrees.'

'Every body or object is susceptible to study when it has or transmits energy, and heat is what makes a body or matter have or transmit energy. Absolute zero (-460 F) is the total absence of heat. You see, sir, cold is only a word we use to describe the absence of heat. We cannot measure cold. Heat we can measure in thermal units because heat is energy. Cold is not the opposite of heat, sir, just the absence of it.'

Silence across the room. A pen drops somewhere in the classroom, sounding like a hammer.

'What about darkness, professor. Is there such a thing as darkness?'

'Yes,' the professor replies without hesitation. 'What is night if it isn't darkness?'

'You're wrong again, sir. Darkness is not something; it is the absence of something. You can have low light, normal light, bright light, flashing light, but if you have no light constantly you have nothing and it's called darkness, isn't it? That's the meaning we use to define the word.'

'In reality, darkness isn't. If it were, you would be able to make darkness darker, wouldn't you?'

The professor begins to smile at the student in front of him. This will be a good semester. 'So what point are you making, young man?'

'Yes, professor. My point is, your philosophical premise is flawed to start with, and so your conclusion must also be flawed.'

The professor's face cannot hide his surprise this time. 'Flawed? Can you explain how?'

'You are working on the premise of duality,' the student explains. 'You argue that there is life and then there's death; a good God and a bad God. You are viewing the concept of God as something finite, something we can measure. Sir, science can't even explain a thought.'

'It uses electricity and magnetism, but has never seen, much less fully understood either one. To view death as the opposite of life is to be ignorant of the fact that death cannot exist as a substantive thing. Death is not the opposite of life, just the absence of it.'

'Now tell me, professor. Do you teach your students that they evolved from a monkey?'

'If you are referring to the natural evolutionary process, young man, yes, of course I do.'

'Have you ever observed evolution with your own eyes, sir?'

The professor begins to shake his head, still smiling, as he realises where the argument is going. A very good semester, indeed.

'Since no one has ever observed the process of evolution at work and cannot even prove that this process is an on-going endeavour, are you not teaching your opinion, sir? Are you now not a scientist, but a preacher?'

The class is in uproar. The student remains silent until the commotion has subsided.

'To continue the point you were making earlier to the other student, let me give you an example of what I mean.'

The student looks around the room. 'Is there anyone in the class who has ever seen the professor's brain?' The class breaks out into laughter.

'Is there anyone here who has ever heard the professor's brain, felt the professor's brain, touched or smelt the professor's brain? No one appears to have done so. So, according to the established rules of empirical, stable, demonstrable protocol, science says that you have no brain, with all due respect, sir.'

'So if science says you have no brain, how can we trust your lectures, sir?'

Now the room is silent. The professor just stares at the student, his face unreadable.

Finally, after what seems an eternity, the old man answers. 'I guess you'll have to take them on faith.'

'Now, you accept that there is faith, and, in fact, faith exists with life,' the student continues. 'Now, sir, is there such a thing as evil?'

Now uncertain, the professor responds, 'Of course, there is. We see it everyday It is in the daily example of man's inhumanity to man. It is in the multitude of crime and violence everywhere in the world. These manifestations are nothing else but evil.'

To this the student replied, 'Evil does not exist sir, or at least it does not exist unto itself. Evil is simply the absence of God. It is just like darkness and cold, a word that man has created to describe the absence of God. God did not create evil. Evil is the result of what happens when man does not have God's love present in his heart. It's like the cold that comes when there is no heat or the darkness that comes when there is no light.'

The professor sat down.

PS: the student was Albert Einstein

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

600x450-2010041400033.jpg

Porno exhaust, bit small tho :)

Looks like a "Kakimoto Dual N1 Racing" system like the one I had in my R Luke.....not cheap at all unfortunately.

PS: the student was Albert Einstein

Fair dinkum?!.....I thought the kid came across as pretty clever.

Chad nah i havent. Got no idea how to either. You gonna single shim or double?

I've got a single 1.49mm shim to put in. You keen to give it a crack with me? I dont really have the rite tools at my work so if i could bring it around yours one night this week we can have a go at it.

I hope you shielded the glass from the grinding sparks, if not the glass will be stuffed.

Edited by DSTROY
I've got a single 1.49mm shim to put in. You keen to give it a crack with me? I dont really have the rite tools at my work so if i could bring it around yours one night this week we can have a go at it.

If you want to bring it up to my place on Wednesday night i'll do it for you, and i have the right tools LOL.

If you don't have the right shape drifts you will find it very had to get the bearing keepers back in.

Edited by D_Stirls
If you want to bring it up to my place on Wednesday night i'll do it for you, and i have the right tools LOL.

If you don't have the right shape drifts you will find it very had to get the bearing keepers back in.

how long do you think it will take to do?

Glass looks fine Chad. What would the sparks do to it?

Also take Dales offer, i dont really know what im doing with shims.

Grinding sparks melt to the glass and the glass ends up with spots stuck all over it, and you cant get it off.

I used steel wool just to get rid of the shine on the old paint. Its called VHT wrinkle paint. Heaps easy to use, just give it a decent coat and after about 15-20 minutes it starts to wrinkle up.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Jdm DC2R is also nice for a FF car compared to the regular hatches of the time.
    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
    • Every one has seemed to of have missed . . . . . . . The Mazda Cosmo . . . . . . what a MACHINE ! !
×
×
  • Create New...