Ecu Error Codes

[Luke_ENR34]

Need an Air-bag error code cleared ASAP, Who has the tools besides nissan?

Cheers Luke

Mods leave for a few days plz.

[Dohmar]

Need an Air-bag error code cleared ASAP, Who has the tools besides nissan?

Cheers Luke

Mods leave for a few days plz.

if u have the obd1 connector, i can clear it for u

-D

[Luke_ENR34]

How do i know if i have that?

[Madaz]

^^ pretty sure you do its the console port nissan use its tucked up in you interior fuse box

[Weezy]

Sinergy Motorsports can as far as I know.

[nicr4wks]

I also have a Nissan Consult cable that should work.

[CRoNic...]

You have a OBD2 connector.

OBD1 finished at the 32's. 33 onwards came out with the 2's.

[nicr4wks]

 

^ this is what all of the 33 and 34's I've plugged in to have had, supposedly 32's also have the same connector.

^ This is the newer (post 2000?) OBDII interface which is on V35 etc.

[ISC-Performance]

you can buy scan gauge and other brand devices that read and clear codes from Jaycar/Ebay etc for under $200 aswell.

[Luke_ENR34]

Do u know how to clear them nick? If so what suburb u in and how much?

[Boof]

i've got a scan gauge in the wrx but not exactly sure how to clear them...instruction manual works

[Dohmar]

^ this is what all of the 33 and 34's I've plugged in to have had, supposedly 32's also have the same connector.

Correct. Nightcrawlers R34 GT-T had an OBD1 connector, which surprised me as I was almost sure that all 34's had OBD2

Check under your dash's fuse area, that grey connector should be right near it

-D

[CRoNic...]

Oh right... I always thought that 33's and 34's had OBD2 connectors :|

[nicr4wks]

Do u know how to clear them nick? If so what suburb u in and how much?

The software I have has an option to clear air bag codes, I've never had an air bag error to test it though.

I'd be willing to give it a shot, Highbury after hours or Frewville during my lunch break, no charges

[Luke_ENR34]

Well I have the obd1 connector, so I'll be dropping by dohmars place after work. If it doesn't work out I'll let u know nick. Cheers.

[jrm]

The software I have has an option to clear air bag codes, I've never had an air bag error to test it though.

I'd be willing to give it a shot, Highbury after hours or Frewville during my lunch break, no charges

Wow, which software is that? Sounds like it must be CONSULT2 compatible to hook into the ancillary ECUs - unless its just OBD2?

Generally speaking most of the software out there (non-commercial) will only do CONSULT1 which is fairly limited in what it can talk to and do. On most cars I've played with on CONSULT there are quite a few other ECUs available via the bus, but require you to use the CONSULT2 protocol, which isn't very well documented (if at all). When you do an initial query, it'll list all of the ECUs you can talk to... (Seem to recall 'EF' is the main ECU, but there's also stuff like SRS, TCS/ABS/HICAS, AT, etc)... Anyways

[CRoNic...]

Does anyone have any pictures of where exactly the OBD port is located on a 32 GTR? I've looked all under my dash, near my fuse box, everywhere... but can't find it!

And the net only shows the actual plug but not exactly where it is

[Tangles]

I can do it

My consult & laptop are in my car, at boostworx atm

let me know if you need a hand.

[Luke_ENR34]

Cheers guys, I'll see how I go with Dohmar after work first.

Thanks.

[Dohmar]

Does anyone have any pictures of where exactly the OBD port is located on a 32 GTR? I've looked all under my dash, near my fuse box, everywhere... but can't find it!

And the net only shows the actual plug but not exactly where it is

Fusebox Above your right knee, port is above the fuse cluster, to the left.

-D