Jump to content
SAU Community

Recommended Posts

Dark Grey or Black R33, gave a wave and a nod was received :)

Yellow R34 with High wing stands and I think GTR wing.

Both on Parramatta Rd at about 4.30 or 5ish heading onto M4. Got gated by a slower driver and was left out :(

Dark Grey or Black R33, gave a wave and a nod was received :)

Yellow R34 with High wing stands and I think GTR wing.

Both on Parramatta Rd at about 4.30 or 5ish heading onto M4. Got gated by a slower driver and was left out :(

i saw a maroon 33 with a gtr spoiler on the harbour bridge all the way through miltary rd onwards on saturday. Had a bit of a lead foot.

Saw a very nice white 34 gtr pulling into a shop on parramatta rd near burwood rd intersection. Gave me a wave. Maybe XNTRQ? Very nice car mate i was sitting in the traffic in a black 33 bored out of my brain.

Also saw a silver 33 i think with red plates in the hill area before robertson pie shop. I think he was trying to get tail happy and unfortunately ended up stuck half in the ditch on the side.

Edited by bull_11

Saw a very nice white 34 gtr pulling into a shop on parramatta rd near burwood rd intersection. Gave me a wave. Maybe XNTRQ? Very nice car mate i was sitting in the traffic in a black 33 bored out of my brain.

He drives a GT.

i saw a maroon 33 with a gtr spoiler on the harbour bridge all the way through miltary rd onwards on saturday. Had a bit of a lead foot.

Saw a very nice white 34 gtr pulling into a shop on parramatta rd near burwood rd intersection. Gave me a wave. Maybe XNTRQ? Very nice car mate i was sitting in the traffic in a black 33 bored out of my brain.

Also saw a silver 33 i think with red plates in the hill area before robertson pie shop. I think he was trying to get tail happy and unfortunately ended up stuck half in the ditch on the side.

Like the front end in my sig?

I go on parra road every day to work and home. Were you on parra road on sunday? late in the arvo about 4pm ish?

Green P plater in a black R34GT last night turning on to Lane Cove Rd from Waterloo around 7:30pm

White R34 with a Nismo kit this morning on the M4 near the James Ruse Dr exit around 6am

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...