Jump to content
SAU Community

Recommended Posts

Hello All,

I had a billet coil pack cover made up for my CA18 last year and there has been a bit of interest in getting them made up for other engines. My brother has finally had got around to designing them for RB's and SR's and has got a few businesses that have ordered some batches in the last couple weeks, since he is already doing some batches i asked if he would do a cheaper price if i could get enough orders to warrant him making another batch, So here we are.

1 Month time span (14/10/09 > 14/11/09)

10 orders needed

GrowlyLogo.jpg

GROWLY CUSTOM BILLET COIL PACK COVERS

CNC Machined from 6mm Billet Aluminium

Supplied with Stainless Screws needed

CNC Machined Finish with a Choice of Engraved Designs,

  • RB 25 COIL COVER :- GROUP BUY = $120; RRP = $160
  • RB 20 COIL COVER :- GROUP BUY = $120; RRP = $160
  • CA 18 COIL COVER :- GROUP BUY = $90; RRP = $120
  • SR 20 COIL COVER :- GROUP BUY = $80; RRP = $110 (non-VTC only)
  • RB26 CENTRE BADGE :- GROUP BUY = $50; RRP = $70 (Pictures up by next week)

Postage & handling $20 Aust'' Wide

ENGRAVINGS :-

  • Choose from the Logo's shown below, or;
  • Custom engraving using a Microsoft Font i.e. Number Plate, e.t.c

ACCOUNT DETAILS

BSB: 124001

Account number: 20470454

Account name: M L Stirling

Bank: Bank of Queensland

Once the payment has been sent through an email MUST be sent to [email protected] with;

  • SAU User Name
  • Address
  • Contact Number
  • Engine Type
  • Design Wanted

coilcovers002.jpg

coilcovers008.jpg

coilcover3003.jpg

SAUGROUPBUYLOGOS.jpg

coilcover2007.jpg

My CA Cover;

Image800.jpg

Image618.jpg

Edited by D_Stirls
Link to comment
https://www.sau.com.au/forums/topic/291973-coil-pack-covers-rb2025-sr20-ca18/
Share on other sites

So nothing for Rb26...

What he is doing for the RB26 is a billet decal that replaces the factory decal in teh centre of the coil pack cover. (pictures will be up in a couple days)

He can do the coil pack covers for an RB26 but not for that price.

For him to make a 26 cover that would suit the cam cover profile (because it's quite raised) you'd be looking at $140 in material cost alone and more that that in machine time .

Edited by D_Stirls
on r33 s1 there's a ignitor at back will this fit back in stock position with these?

how long after group buy finishes we can expect delivery?

Hey Mate,

You'll notice that on the rear of the plate in the first picture that there are 4 holes, these are tapped and are there so the ignitor can be re fitted. As for the date of delivery, they will all be sent within a week of the group buy closing.

Dale

Can I get one without the 4 holes tapped in the rear? As I do not have an igniter pack.

No problem, Just put it in the email that you send after the payment has been sent.

Here is an example of the decal for the centre of the RB26 Coil Pack Cover;

rb26coilcoverbadge004-1.jpg

rb26coilcoverbadge003.jpg

Here is one that was done for a customer of my brothers, it's more complicated than the one being offered in the GB as it has raised lettering was black anodised and then rubbed back; but it gives you an idea of what they will look like fitted.

p1020268.JPG

Edited by D_Stirls
Count me in...

Though I'm holding off on sending the money through until 10 people have confirmed, so I know it will go ahead.

Cheers

same applies to me, count me in and let me know wen u find a 10th and I'll forward an email with wat I want plus the money... Cheers

Ok so this is where we are at;

1. Ryno

2. rhys-

3. 08r3308

4.

5.

6.

7.

8.

9.

10.

awaiting next GB due to cash :thumbsup: is there gonna be another one ???? :s

Not sure, this one is a bit slow to start so it depends how this one goes in the end.

Edited by D_Stirls
Is it possibly he could do the tommy kaira logo??

PM Sent;

1. Ryno

2. rhys-

3. 08r3308

4. gwholxc

5. FIRE BREATHER

6.

7.

8.

9.

10.

Edited by D_Stirls

4 days left, and by the way this GB is going it'll probably be the last.

I have spoken to Matt and whoever has stated that they want one he will do one for even though i didn't get the numbers needed.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I'm pretty much healed up post surgery so I spent another almost full day out in the shed re-arranging everything to make room for all of the shit that I've taken off the car.  I need to get everything off the floor and away from the car for when I start making a massive mess stripping off the remaining body deadener and then for the the painting process.  Almost got the shed to a point now where I feel I can actually start working on the car again (clean shed clean mind or something!).  Almost 11 years of accumulated car parts, building supplies, tools, junk, etc have taken a long time to get in some sort of order again!  Most stuff is now boxed up and in the back shed if it's not car related.  Most people would still be horrified walking into my shed but it's significantly better than it was before!   For those that saw my separate post the other day, yeah I ordered one.... This version- I convinced myself to stop being a clown, wake up to yourself and realise it will take you 5 weeks to make one by which stage you're over working on the car again...  Maybe I am getting on top of my "mental ailments" and making smarter choices.... $1450 delivered which will take my miserable half-dutch arse a few days to get over having spent that much!  If I don't have a use for it straight away after my car is off it I might even see if there is a "rental market" for them.  See if anyone wants to hire it for a period of time.  $25 a week or something like that.  I'll worry about that when my car is actually ready to come off it though as that might be a while away!! There's now no excuses now for not ending up with an underside you could eat off! Away for kids sport the next few weekends so hopefully can get the rotisserie assembled ready to go for the car to go straight on it the next available weekend.    
    • I always use my Karcher, but it's only a little one that I picked up from Supercheap  The only issue I ever had with a pressure washer was when I was a kid cleaning coaches, they had a hi-po industrial sized petrol jobbie that would strip paint if you got to close I saying this, we have a fairly high power washer at work with a diesel powered heater that sprays water at about 60°c, it works great for removing old wax and road grime on the underbody after some foam cannon action, albeit from a "stand off" distance of a few feet
    • Sorry no - The sandtrap adventure ended the day, happened at the end of the last session. At that time I wasn't hearing any weird noises nor were the brakes shuddering anymore. It was only when watching the videos that I remembered I had these sounds early on!
    • Did the noise appear after your sand trap adventure? Could be something got dislodged and is playing rub rub. Even a rock wedged somewhere.
    • Is there a shroud around the tailshaft spline into the back of the box? They can rub and make a horrible noise if they are not on straight/damaged. The heat might have caused it to grow too much in one direction and rub.
×
×
  • Create New...