Jump to content
SAU Community

Garrett Ta45 For Sale/swap (1.05 Rear)

tufrx3
 Share

Recommended Posts

tufrx3 Community Regular

tufrx3

Posted
Posted

For sale:

Garrett Ta45 Turbo 1.05 rear housing (Large Turbo) Will come with K & N Filter and i should be able to provide the rear flange off the dump pipe as i am going to use a smaller turbo.

Item Condition: Has no to minimal shaft play back and front (could not feel any play when i tried), and normal play sideways (normal). I would say good condition. No fins are bent or such.

Price and price conditions: Swap for smaller turbo such as t66 or to4z or gt35/40 with cash adjustment if needed. Happy with genuine offers.

Extra Info: Is making over 300 rwkw now on a 13b extend port. Hits hard at around 4500-5000rpm. Can see running in car if you like.

Pictures: see attactchments

post-23990-1255517820_thumb.jpg

post-23990-1255517832_thumb.jpg

Contact Details: Karl on 0423 305 644

Location: Dandenong

Delivery & Conditions of Delivery: Prefer local due to the fact that i don't like sending stuff like turbo's via post

Link to comment
https://www.sau.com.au/forums/topic/292021-garrett-ta45-for-saleswap-105-rear/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Neil's R33 Gts-t Build

      By MBS206 · Posted

      The above video is working normally. That is, that's how the right hand indicator should cancel when rotating the wheel left.
    • PranK
      My BMW 335i

      By PranK · Posted

      I noticed that I could see creatures on the moon when I turned my new headlights on. I thought I should check the alignment. It's pretty rudimentary but I just grabbed some dry wall and put it against my tablet and made sure the beam was below the height on the headlights. Ie the beam is at 600mm on my car, I just made it lower than that 7.5m away.  Not the best but it'll do until I can do it properly at the local shops.   
    • GTSBoy
      Ceramic turbine damage to engine - what did yours do?

      By GTSBoy · Posted

      As @Duncan said - the bores are most likely to cop it. But anything can and does happen. Rods are cheap. Rods are good. The work to rebuild the motor will be 30x the price of rods. You won't notice it.
    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Yeah car has 110 on the clock. That said the front turbo (that exploded) doesn't seem to be the original, it has a S1 part number but the car is a series 3. Yep, in the cat is where I first found the turbine wheel pieces - a couple decent sized ones, then a whole lot of fragments.  I agree, probably makes sense to upgrade parts that are being replaced. Things like rods would be 'nice' but realistically it seems unlikely they would need replacing. I was hoping that it was a case that they generally f**k up the valves but not the bore, or vice versa. Is it generally the scour damage rather than ceramic bits getting mashed into the piston tops / valves? I tried a search but couldn't find any threads with pics from the guts of a motor that's had this happen. 
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Front seats now in, fixing a little rust then front doors sealed up again finished. had to install a fire extinguisher within arms distance of drivers seat for hill climb regulations. little bit of good old silo diff action lol IMG_9146.mov
×
×
  • Create New...