Jump to content
SAU Community

Recommended Posts

Sorry the old thread was getting difficult to understand so I have combined them and included pics of bits that didn't have pics before

Location - Adelaide can post/courier at buyers expense

Contact - PM or SMS 0404998591

Full R33 GTR Interior in excellent condition including front and rear seats + front and rear door trims/cards. Price - $1400 Now $1300

Nismo 555 Injectors from my RB25. The injectors have only been used for a couple of months and were fitted to a genuine new fuel rail with new injector caps and new fuel pressure regulator. All is ready to fit straight to your RB25 and are good for over 300rwkw. Price - $900

Brand New Genuine Nissan Plastic GTR N1 Vent, only one the other went missing, cost $380 from Nissan. These have special clips and a sticky seal making installation a simple process of just cutting out a slot, peeling off the backing to the sealant and clipping in place Price - $150

n1vent.th.jpgn1ventpartnumberbox.th.jpg

GFB Stealth FX BOV kit complete with the optional whistle trumpet adaptor, the normal trumpet adaptor, the standard plumbback adaptor and a 20mm hose plumback adaptor. Currently has the universal adaptor fitted also have a S15 adaptor kit I can supply with it for free as shown on the left in the picture. Comes complete with original purchase receipt for $500 and receipts for the extra fittings and trumpets. For those wishing to use this in the standard position you simply need to purchase the adaptor from GFB and it fits in the bottom Price - $300

gfbstealthfxfittings.th.jpg

R33 Series 2 Front Bar in maroon complete with the rare Nismo Lower Lip + N1 Vents. I haven't seen another Series 2 bar that has had N1 Vents fitted before but I think it compliments the Nismo lip giving a tuff look. The bar comes with all the bits to properly reattach the lip and N1 vents, in the plastic bag in the picture, and will need painting afterwards. The bar has been sanded down ready for painting hence the colour around the vents etc. Price - $275

maroonr33frontbarwithn1.th.jpg

Apexi Pen Turbo Timer as new complete in box bought from Autobarn and as such has english manuals aswell as jap. Price - $90 Delivered

apexipenkit.th.jpgapexipenkitcloseup.th.jpg

R33 GTS-T Ohlins Rear Damper Adjustable Shocks and Springs. These shocks feature massive inverse monotube inserts. Price - $375 Pair

ohlinsrearleft.th.jpgohlinsrearright.th.jpg

R33 Stock Catalytic Converter should fit S13 R32 R33 and Cefiro and they all have the same length cat and flange angles. Price - $40

r33cat.th.jpg

------------------------------------------------------------------------------------------

Location - Adelaide can post/courier at buyers expense

Contact - PM or SMS 0404998591

let me know if you find the other vent ill take them

Yeah looked everywhere not sure where it went.

Sorry not to clearly written but it was $380 each vent not the pair so $150 is a steal to those offering $50.

-----------------------------------------------------------------------

The GFB BOV Kit is now sold pending payment

-----------------------------------------------------------------------

Pics of Ohlins are not working new links below

ohlinsrearleft.th.jpgohlinsrearright.th.jpg

Edited by nigelswazi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi, just checking. Did you get this stuff made by Vspec Performance and at what price roughly? Looking into (sometime later) also getting such a intake kit, and Trust as well as HKS don't make a full set like this anymore.
    • 2025 Update PRP RB30 Black and Crank Shipped from Austrailia made it and was sent off to the machine shop. -700 to 800hp Service was done to the Block, which included: Inspection Prep and Black Brace to convert engine to 4wd oil Pan  Crank Fully prepped for 1000hp PRP RB30 timing belt kit w/ ALL options Nitto Pistons Nitto I-Beam Rods Nitto Oil Pump New OEM Nissan RB26 Cylinder Head Shipped Supertech intake and exhaust Valves over-sized Kelford 272 cams Mild Lift Nitto Headgasket All of the machine work is completed and next step is assembly and dropping in the new motor.   Upgrades (Changes) from the previous build: Engine Management - no longer using ECUMasters. Haltech Platinum Pro Turbo - Went from twin HKS 2530s with upgraded wheels to BW362SX-E Fuel - 1000cc injectors to ID1430x Single in tank Walbro 450 to Radium External Surge Tank w/ 2x Walbro 450s     I am looking to be back on the road by the end of summer. Wish me luck! monthly updates should be coming!    
    • Realised I never posted this , also I never got a price 
    • I'm glad to hear you've joined the SKI club. Spend the Kids Inheritance.
    • I have a VALCON if anyone wants it, I have no idea why you'd want to have VVT specifically broken out of the ECU as opposed to running it off the FCON/whatever standalone you have.
×
×
  • Create New...