Jump to content
SAU Community

Hid Lights

toygtr

By toygtr,
in Exterior & Interior Styling

 Share

Recommended Posts

toygtr Community Regular

toygtr

Posted
Posted

I have a R32 GTR and have white lights in them but as my car only has H3C globes i can only improve them so much.

So my question is how bright do i go with a HID set? 6000k, 8000k? what?

I heard if you go to bright it can burn the inside of your light from the heat it produces. Is this right?

Does any type fit in the R32 GTR and any problems associated with having them?

Do i need to get a kit specific to the H3C globe or will any HID fit?

Do i need to modify anything?

Any info on this would be much appreciated,

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/292113-hid-lights/
Share on other sites
alr33x Grand Master

alr33x

Posted
Posted
I have a R32 GTR and have white lights in them but as my car only has H3C globes i can only improve them so much.

So my question is how bright do i go with a HID set? 6000k, 8000k? what?

I heard if you go to bright it can burn the inside of your light from the heat it produces. Is this right?

Does any type fit in the R32 GTR and any problems associated with having them?

Do i need to get a kit specific to the H3C globe or will any HID fit?

Do i need to modify anything?

Any info on this would be much appreciated,

Thanks.

as far as i know 4000k is brightest and legal thereafter its not i had and would recommend 6000k as best mix of white/blue, 8000k is very blue and higher starts heading pink i havent fitted them to my skyline but i bought an after market kit which was model specific h1 i think it was, as far as heat goes didnt have any issues with this, its a fairly straight forward upgrade just mount ballasts hook up and away u go ;)

important to note it is illegal if you dont have washers and/or auto leveling for headlights..

Link to comment
https://www.sau.com.au/forums/topic/292113-hid-lights/#findComment-4882443
Share on other sites
RusH_ Veteran

RusH_

Posted
Posted

yes you need a H3C specific HID kit, and as for brightness, its really dependant upon the kit, each kit is somewhat different from the next, i have a bosch 8000k H1 HID kit bought through NYTSKY on this forum, i dont think its too bright or too blue at all. of course that will vary with peoples opinions.

As far as i understand, for optimal light dispersion you want no more than 6000k, anything higher and you start to lose the spread of light.

Link to comment
https://www.sau.com.au/forums/topic/292113-hid-lights/#findComment-4882446
Share on other sites
RusH_ Veteran

RusH_

Posted
Posted
as far as i know 4000k is brightest and legal thereafter its not i had and would recommend 6000k as best mix of white/blue, 8000k is very blue and higher starts heading pink i havent fitted them to my skyline but i bought an after market kit which was model specific h1 i think it was, as far as heat goes didnt have any issues with this, its a fairly straight forward upgrade just mount ballasts hook up and away u go ;)

important to note it is illegal if you dont have washers and/or auto leveling for headlights..

Any HID kit is illegal, 4000, 6000 or 12000k make no difference. it is true that the higher in the heat range you go the bluer and progressively more violet the color will become, but it will vary between manufacturers, my 8000k kit can be seen here

http://www.skylinesaustralia.com/forums/Xe...ts-t290630.html

and it is probably even less blue in person

Link to comment
https://www.sau.com.au/forums/topic/292113-hid-lights/#findComment-4882453
Share on other sites
Jack88 Experienced

Jack88

Posted
Posted
I have a R32 GTR and have white lights in them but as my car only has H3C globes i can only improve them so much.

So my question is how bright do i go with a HID set? 6000k, 8000k? what?

I heard if you go to bright it can burn the inside of your light from the heat it produces. Is this right?

Does any type fit in the R32 GTR and any problems associated with having them?

Do i need to get a kit specific to the H3C globe or will any HID fit?

Do i need to modify anything?

Any info on this would be much appreciated,

Thanks.

The kelvin rating does not dictate how bright there going to be. The kelvin rating is purly a colour temprature rating only. Around 4300K is the whitest its going to get anything beyond that and it will start going more blue.

The HID kits you will be looking at will all be rated to 35watts.

Link to comment
https://www.sau.com.au/forums/topic/292113-hid-lights/#findComment-4885230
Share on other sites
toygtr Community Regular

toygtr

Posted
  • Author
Posted
The kelvin rating does not dictate how bright there going to be. The kelvin rating is purly a colour temprature rating only. Around 4300K is the whitest its going to get anything beyond that and it will start going more blue.

The HID kits you will be looking at will all be rated to 35watts.

There are kits that are 50 watts.

Will these be better/brighter than the 35 watts?

Link to comment
https://www.sau.com.au/forums/topic/292113-hid-lights/#findComment-4888642
Share on other sites
toygtr Community Regular

toygtr

Posted
  • Author
Posted
The kelvin rating does not dictate how bright there going to be. The kelvin rating is purly a colour temprature rating only. Around 4300K is the whitest its going to get anything beyond that and it will start going more blue.

The HID kits you will be looking at will all be rated to 35watts.

There are kits that are 50 watts.

Will these be better/brighter than the 35 watts?

Link to comment
https://www.sau.com.au/forums/topic/292113-hid-lights/#findComment-4888655
Share on other sites
wisey18 Rising Star

wisey18

Posted
Posted
There are kits that are 50 watts.

Will these be better/brighter than the 35 watts?

They will be brighter but you will have problems with your wiring as it could melt from the ammount of current it will push through and also your headlights could melt from the heat.

Link to comment
https://www.sau.com.au/forums/topic/292113-hid-lights/#findComment-4888709
Share on other sites
Jack88 Experienced

Jack88

Posted
Posted (edited)

hes not going to have a problem with wiring as the stock system is rated to 55 watts. Same applys with heat.

One of the advantages of using HID's is there equal or higher light output using less power then standard globes. stock HID's are rated to 35 watts and are more then enough. There wont be any problems with using 50 watt HID's but you will probly get alot of glare and anoy alot of other people on the road. I have personally never used or installed 50 watt units for customers so i cant really say what there going to be like.

But yes the 50 watt units will be a fair bit brighter then the 35 watt ones.

Edited by Jack88
Link to comment
https://www.sau.com.au/forums/topic/292113-hid-lights/#findComment-4888837
Share on other sites
NYTSKY Grand Master

NYTSKY

Posted
Posted

35w is PLENTY for normal night driving.

Would only recommend 55w to guys who rally or go offroad.

As for Kelvin ratings IMO stay under 8000k.

I have spoken to toygtr, but i just thought i would mention here that H3C kits are available in the GB.

Link to comment
https://www.sau.com.au/forums/topic/292113-hid-lights/#findComment-4888848
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • cardre
      App to track mods, repairs etc.

      By cardre · Posted

      Hey everyone, just wanted to let you know about an app I use to track the modifications, repairs, servicing etc I do to my R33 GTR. You might like to use it as well. I'm biased because my son just wrote and released it! But I think you might find it useful to... https://trackmymods.com  
    • cardre
      Proud Dad

      By cardre · Posted

      Hey everyone, been on here for a while, but never introduced myself before. 1st import was a R32 GTS Type M, then R33 GTS, now R33 GTR - each one sold to help pay for the next one. Over the years my son has seen me modify and do changes to my imports and was one of the reasons for him to build an app for car enthusiasts like us. (He can only afford a 2007 Honda at the moment, but he'll get there!) Anyway, bit of a proud Dad moment as he's released an app that I use and you all might like to as well. https://trackmymods.com  
    • Dose Pipe Sutututu
      Dual exhaust questions

      By Dose Pipe Sutututu · Posted

      It will sound tragic and you wished you didn't have 1x exhaust per turbo. There's a reason why most S55 owners change to a single mid pipe.
    • Rezz
      New owner of a Skyline R32 GTS

      By Rezz · Posted

      Echo the comments about the well preserved condition it's in. It has the aero bumper too for extra points. Nice car, and please keep it like that! 🙂
    • GTSBoy
      Dual exhaust questions

      By GTSBoy · Posted

      1. There are no real performance benefits. It sounds different, and as the pipes are not as large diameter you can claw back some undercar clearance or run lower (if that's your thing). 2. Twin pipes, offering exactly the same cross sectional area as a single pipe** will have higher pressure drop - so will not flow as well. That's because there is more surface area of wall per cross sectional pipe area, hence more frictional losses. ** But of course, it is almost impossible to get 2 pipes that are exactly the same XS area as a given typical single pipe. eg, 2x2" is not the same as 1x 3", although it is close. If the 2x pipes add up to less XS area than the single - it will just be flat out worse. If the 2x pipes add up to a bit more than the single, then it might come out as a wash. If the 2x pipes are substantially more XS area than the single, then it will probably flow a little better. 3. No. Why would there be? What have cats got to do with boost creep?*** ***But for f**ks' sake, please run a cat. 4. If you want.
×
×
  • Create New...