Jump to content
SAU Community

Are Qld Roads Better Than Nsw Roads


The Bogan
 Share

Recommended Posts

Depends what sort of roads, and where. Country roads are, as usual, quite shit due to lol population density etc. In the city its a mixed bag. Older roads are usually shit, some inner city arterials are just old 2lane roads with 4 lanes or more stuck in it etc. However, new roads are built, how would you say "properly" these days (with islands, shoulders and the like). Suburban roads are a mixed bag, though the surface is usally kept in good order.

Oh and traffic congestion is a bitch, but nowhere near as bad as sydney from what i've been told.

Link to comment
Share on other sites

I live about an hour out of Brissie and some of the roads out here are atrocious. Unsealed shoulders, potholes, large bumps where the council's quick-fix's have been run over by trucks all day long. I used to ride about 50km each way to work and back (on some pretty busy roads I might add) and they are unsafe on a bike at night.

It doesn't really seem fair, especially after the last rego increase, and all the dollars that are made through fuel tax's etc.

Link to comment
Share on other sites

i lived in nsw and now in qld and nsw roads are sooooo bad.as soon as you pass the border you notice the difference. i have had better dirt roads than nsw sealed roads.

theres my 2 cents

Link to comment
Share on other sites

I would go as far as to say that NSW roads are some of the worst in the developed world.I have driven on roads in 3rd world countries that are better than here.They get resurfaced nowhere near as often as they should and when they do they just dont seem to last long before Potholes take over.Lousy to think that you can spend big dollars on lightweight rims and have good ole Sydney Potholes totally stuff your rims in no time.

Link to comment
Share on other sites

We're on a road to nowhere

Come on inside

Taking that ride to nowhere

We'll take that ride

We're on a road to nowhere (hey!)

We're on a road to nowhere (heugh!)

We're on a road to nowhere (ha! ha!)

Link to comment
Share on other sites

After living in sydney for a while most queensland roads are better than nsw ones but they have really gotten a lot worse than they use to be.

I agree that after the price hike in rego etc they should be better than they are

Link to comment
Share on other sites

yeh same i lived in sydney/wollongong for most my life then moved to goldy few years back... i hate the nsw roads...especially PARRAMATTA rd in the city lol ( well just about any where in the city)

ben...

Link to comment
Share on other sites

Parramatta road is pretty special, I got stuck there one night in my 32 it was pissing down and it was the first time driving in sydney so i had no idea where i was going, good times

Link to comment
Share on other sites

yeh same i lived in sydney/wollongong for most my life then moved to goldy few years back... i hate the nsw roads...especially PARRAMATTA rd in the city lol ( well just about any where in the city)

ben...

Wollongong Roads are a bit of a mix, but for the most part pretty bad, particularly around the CBD. The dodgey road repairs never cease to amaze.

Don't really drive around Sydney but as far as being a passenger goes, I've seen some pretty bad roads... must say I'd prefer driving on Brisbane roads

Link to comment
Share on other sites

The roads up in North Queensland, Bowen / Mackay area are atrocious, potholes everywhere.

even worse passed that ...ie heading towards townsville.

my old laser used to always get swallowed up.

but yeh agree that bowen roads are no good.... he he it was supposed to have been/ intended to be the capital of QLd years back too

Link to comment
Share on other sites

been a while since i went NSW way, but yeah they were bad once you head over the border.

as for here, brisbane city roads are a dream in comparison to the warrego highway. im jsut glad my car is still standard, and will stay that way till i no longer have to drive what truckies refer to as the goat track.

they do fix the potholes pretty quick, but the undulations are crazy, getting light in your seat at 110km/h on a so called highway is a wierd feeling. i feel bad for my shocks every time i drive up it.

Link to comment
Share on other sites

I find the majority of roads are pretty decent. I don't know why people consider them crap half the time.

One of the roads near my place is 100kph. Sure, the road is crap if you drive on it @ 100kph... But then it's not really safe to drive that speed anyway (I have no idea why the limit is 100kph).

Country roads don't tend to have the same speed limit scrutiny on them so if a rural/country road feels dodgy then slow down. It's common sense really. Speed limits are limits, not targets. You don't HAVE to hit the limit.

Link to comment
Share on other sites

i wouldnt say they are that bad, but they certainly aren't that good either.

what shits me is the quality of the prep work, we've all seen how a new road is being laid down, then a few weeks later one pot hole, then another then another etc etc etc then you get crews going along with those tar guns fillings in the cracks along the road, causing ruts in the road for water to pull in.. all because the ground underneath wasn't compacted as it should be, or the right topcoat wasn't put down.

all so the higher powers that be can save a buck or 2

Link to comment
Share on other sites

Yeah, nothing worse than when a dodgy contracter does the roadworks and it starts falling apart straight away.

There was a spot near stanthorpe that had been fixed up with a major roadwork at least twice over a 10 year period, as well as lots of minor fixes (by that i mean, fixing of patches, not filling up potholes). why? they built the dam thing over a underground stream without making any alterations for that fact.

Link to comment
Share on other sites

A few months ago I drove from Brisbane QLD all the way down to Mildura VIC and I would have to say NSW roads are 100 times better than QLD roads as the further we drove out of QLD the smoother the roads seem to get. Granted that it was the inland/country road and that the roads were as wide in some area's as I would have liked it was still very clear that NSW roads were a lot smoother. I also used to ride a motorbike alot and would frequently enter the top end of NSW and they have some brilliantly smooth curvy roads with speed camera signs all over the shop. I highly recommend going for a cruise down there one day as you will enjoy.

And as for rural QLD roads I think they are better than our city roads by far. As I recently went for a cruise with a couple of other SAU members up to Maleny and across and down through Nambour and those roads were far smoother than any of our city roads. A can comfortably say that as I drive right across the city every day to and from work.

In my opinion its NSW roads ftw.

Link to comment
Share on other sites

brisbane roads are f**ked.. potholes, uneven roads, road works that are left for weeks unfinished with no signage, signs saying there is roadworks ahead when there isn't (then you think to yourself, i just drove 40km/h for 5 k's for no f-ing reason),

f**king western freeway a few weeks ago, the dumb kents put up signs saying merge left, roadworks ahead in right lane - so everyone gets in the left lane only to get around the corner to see the roadworks are in the left lane so huge panic as everyone slams their brakes on to avoid hitting the orange markers / council workers, then at the end of the road works it had a sign up saying 100km/h drive safely yet it was in a 70 zone..

/end rant.

p.s brisbane roads are shit.

Edited by defari
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • What makes you say CD009 boxes are not as strong as you would think? I've always been told the last revision (CD00A) is good for 1000whp and I have no issue's believing it when comparing one side by side with an RB25 box. Makes them look tiny. 
    • I picked up an open Center with shafts. I was told the Open shafts will fit a mechanical LSD and looking at them. I think they will work. Will update 
    • The manual says a lot about the different ratios requiring different shafts. all the Centers are the same but depending on the ratio, this determines the shafts because different ratios need the center to be offset more or less or right to left.
    • those 2 sets of shafts will not interchange and if you’re lucky you haven’t damaged anything with all your pressing and bashing you said you’ve done 
    • Freshly built stroked RB25/28. Motor runs great but consumes a lot more oil then It should. This summer with the heat I was consuming roughly a quart per 1800-2000kms. Now with the cold weather coming in, I'm consuming a quart per 1000kms which is no bueno. I had originally chalked this out to break in taking a little longer then it should, but I'm now around 4000km's on this engine. I think it's fair to say something isn't quite right. Here's the kicker, can't find what's causing it. I've also spoken to my engine builder and Precision Turbo and can't figure it out. Here's my train of thought on possible causes and what I've done.  Precision Turbo - I originally started thinking my oil pressure might be a tad too high for my 6466 Gen2. I took the center cartridge out, and while yes there's signs of oil on the turbine heatshield, it's very moderate. There's also very minor in/out play that concerns me. I sent pictures and videos to precision and they said the residue and in/out play is minimal and they doubt this is the issue. For piece of mind, I went ahead and installed a Turbosmart OPR V2 to bring oil pressure down. Made no difference. Precision is willing to take it in on RMA for an inspection and I'll probably take them up on that offer for peace of mind. BTW. Is it just me or does the turbines inducer's look clipped and not even between each other? I just noticed this now while posting and looking at the picture zoomed in. Might just be the picture...  Rings - Hot compression test and leak down test look good. Compression is 160 +-2psi across the board. I leak down at 16% on cyl 1,2,3,5,6 and 18% on cyl4. Keep in mind I have a snap on leak down tester and they read high (I.E, 15% on my wifes 2018 Sentra with 70000kms). Sparkplugs show minimal oil (Only #4 seems to have a tad). At a quart per 1000km's though, I would be expecting them to be wet. Here's the kicker, I run WMI. I'm thinking what if my compression rings are great, but I have an oil control ring issue on cyl4 and my WMI is steam cleaning the pistons and sparkplugs? I can still see the "Spool" logo on top of my CP pistons. The only time I see smoke out of the exhaust is in the high rpm/load range. So far, this is my main culprit. I'll probably turn off my WMI and go out with the car at spring pressure tomorrow and repull the plugs. Other thing that's strange though is that I have never seen any oil in my catch can. Thing is still dry after 4000kms. Cyl1 - Left, Cyl6 - Right. Valve seals - They're new and I would expect oil consumption on idle, first cold start or during decel. None of which is happening.  Crankcase pressure - I have 2x 10an valve cover lines to a vented catch can. Head drain and opened up internal oil drain paths. I also don't run E85. I've never seen any oil in my catch can. Doubtful this is causing any issues.  Rear main seal - I have no visible leaks, but figured maybe it was my rear main seal. After now having added 2-3 quarts, I would expect oil to leak out the bottom drain channel and/or my clutch to be slipping.  Let me know your thoughts. With winter coming and taking the car off the road until spring, I'm fine with pulling the motor apart but I would hate to take it all apart and the turbo was the issue in the end.   
×
×
  • Create New...