Jump to content
SAU Community

Recommended Posts

hi guys, found a supplier in HK called Yodang Carbon Pty Ltd and I have been in contact and asked them for special group buy pricing on CF radiator cooling panels

to suit R33 GTST & R34 GTR (minor mods needed to fit to GTT)

to get it at this price, i need at least 10+ people.

need 50% deposit (rest will need to be paid before it being sent out) before it can go ahead to prevent people from backing out last minute and stuffing it up for everyone else.

i have a sample on the way over to fit my R34 GTT and i will have pics up to show fitment & quality.

sample photo i received from the supplier is below.

start date: 17/10/09

end date: 1/12/09

1.5~ months duration for the group.

pricing: for 10 people (5x R33 GTST, 5x R34 GTR)

$70 + $5-$10 postage aus wide via registered auspost.

currently USD is 92c~ hence the cheap pricing.

radiatorplate.jpg

register your interest here.

thanks

Do they make anything else? Can you get them to make other things in carbon? Personally im holding out on the PSI parts full length cooling plate. However these are a very good price so you shouldn't have drama getting 10 people.

Hi PM-R33,

thanks for that,

they do make other things and can make anything in carbon if i send them a sample (ie: interior trims etc) but i won't be doing that until i receive samples to show how they fit before i organise group buys.

to suit R33 GTST & R34 GTR (minor mods needed to fit to GTT)

register your interest here.

thanks

:) Ah - Hem, how minor ? look forward to seeing the pic of your R34GTT, I'm interested as long as I don't need a course in bodywork to put the thing on :) .

Should maybe consider for the R34GTT ? there's a few of us out there.

I saw a post a while ago about radiator panel thingos like this being unbenificial did anyone else catch it ?

Will be watching this also, very keen.

Does anyone know if normal Radiator Cooling Panel's need to be modified to fit the NISMO / Altia front bar?

thanks for the interest guys.

BASHO/R34GTTTTT; not sure but i dont think its that much different from a standard GTT, issues would be fitting a R34 GTR panel to a GTT which i will be attempting, if it fails, i will modify it, send it back to the manufacturer and ask them to remould.

Cheers

hungryGTR, only whats listed above; thanks

08r3308; sample pics coming once it arrives.

guys; register your interest here whilst the AUD to USD is good!

PLEASE NOTE prices have been updated; the manufcaturer was able to work out a special pricing on shipping so it brings the units down to $60ea + post ($5-$15 depending on your location)

They have them available for S14 & S15 also so if you are interested in either, please let me know.

Cheers

thanks for the interest guys.

BASHO/R34GTTTTT; not sure but i dont think its that much different from a standard GTT, issues would be fitting a R34 GTR panel to a GTT which i will be attempting, if it fails, i will modify it, send it back to the manufacturer and ask them to remould.Cheers

Mate,

just saw the revised prices-I'm in as long as it will fit.

:P

Any difference between the R33 Series 1 and 2?

takes 1 month to make & get delivered to me in Sydney.

not sure about any differences between s1 & s2, can anyone confirm ?

flyz33, at this stage i got around 3/4 people interested.

in order for it to go ahead, i need to confirm 10ppl who are definitely interest & with deposit first.

cheers

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
    • Yes I as well would like to find out where I could get some of the seat material with the red or blue small squares in it
×
×
  • Create New...