Jump to content
SAU Community

Sa - R35 Dyno Day


Martin Donnon
 Share

Recommended Posts

Something we normally do as a bit of a Christmas spirit thing is have an impromptu dyno gathering for friends and customers some time around the main break. This year we want to do something a little different and have an R35 GTR dyno session on Saturday December 12. Open to owners of R35 GTRs and their friends it will be a good day to get some base figures of their cars and their mods. We are only looking for around 10 cars in total...and to kick it off -

1) Martin - Willall Racing R35 GTR

2) Munro - Gun Metallic R35 GTR

3) Seb - Super Silver modified R35 GTR

4) ...

5) ...

6) ...

7) ...

8) ...

9) ...

10) ...

6 to go....will make some great comparisons on the day too :D

Link to comment
Share on other sites

Slot me in with a bog stocker Martin.

Cheers

David

Something we normally do as a bit of a Christmas spirit thing is have an impromptu dyno gathering for friends and customers some time around the main break. This year we want to do something a little different and have an R35 GTR dyno session on Saturday December 12. Open to owners of R35 GTRs and their friends it will be a good day to get some base figures of their cars and their mods. We are only looking for around 10 cars in total...and to kick it off -

1) Martin - Willall Racing R35 GTR

2) Munro - Gun Metallic R35 GTR

3) Seb - Super Silver modified R35 GTR

4) ...

5) ...

6) ...

7) ...

8) ...

9) ...

10) ...

6 to go....will make some great comparisons on the day too :banana:

Link to comment
Share on other sites

Here is the new list :banana:

1) Martin - Willall Racing R35 GTR

2) Munro - Gun Metallic R35 GTR

3) Seb - Super Silver modified R35 GTR

4) David - Gun Metallic R35 GTR

5) ...

I can think of 3 - 4 more that should be straight up starters, get your names in lads or I will get Munro to hunt you down :P

Link to comment
Share on other sites

  • 1 month later...

Thanks for those that came yesterday, it was a great chance to compare modifications and of course have the face off with the mighty Porsche 997TT. Lets just say some of the GTR owners were more than a little surprised by the result! But competition is always healthy

All testing carried out properly strapped on our new Mainline AWD dyno using realistic ramp rates 10km/sec and no fancy corrections. No happy power, just real power :D

Link to comment
Share on other sites

Martin,

Thank you for putting this day on and sorry I couldn't hang around till after the work was done and you and the boys could relax. Nice day for it at least. The results were enlightening to say the least :D Fair's fair though, maybe the setup didn't suit certian engine configrations...

And to all those R35 owners that didn't show. You missed a great afternoon's entertainment!

Link to comment
Share on other sites

Thanks for those that came yesterday, it was a great chance to compare modifications and of course have the face off with the mighty Porsche 997TT. Lets just say some of the GTR owners were more than a little surprised by the result! But competition is always healthy

All testing carried out properly strapped on our new Mainline AWD dyno using realistic ramp rates 10km/sec and no fancy corrections. No happy power, just real power :P

What were the results?

Link to comment
Share on other sites

What were the results?

I can't remember exact numbers except for mine but my stocker GT-R was 293 KW. The 911T was high 250's and one with tune and Willall midpipe was 340 something. The one belonging to Seb was over 400 as described already in a few other threads on this forum. Geez can't we even be modest without getting bagged? ;)

Link to comment
Share on other sites

  • 2 weeks later...

I was pretty happy with the 333 awkw run from my R35.

However, I was a bit disappointed with the 249 rwkw from my E63. I was expecting around 270 considering

they are supposed to be 368kw at flywheel. When Kiers CLS63 made 297 I was devo.

Time to pull out the laptop Martin & give me some of that tuning goodness.

The Lambo hasnt been out to the track for a while, how did Keir go with that & did you run the EvoX?

Cheers & have a good one.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...