Jump to content
SAU Community

Recommended Posts

Selling my 93 white R32 GTST.

I've had the car for about 3 years which over the time was my pride and joy. It was purchased with 120k on then clock and I have since put another approx 40k on. I replaced the steering rack pretty early on in ownership as it was pretty worn and while I was at it removed the pesky HICAS. The old RB20 was still going strong but I decided when a heater hose failed that it was time for some more torque. With the help of some mechanic mates we bolted the RB25 in and after being professionally wired up it's been going strong for the last 6 months. White the engine was out I replaced a few of the other heater hoses on the 25 and put in some new fuel lines as the others were looking a little tired. Overall the engine bay is now pretty clean and looks pretty stock with painted piping and crinkled rockercovers (I will have photos up tonight).

The body is pretty decent however the paint is pretty average with the clear coat peeling in one spot and it could really do with a new boot. Some other issues with the car are the heater/aircon, horn and rear demister are not working. Given enough time I will organize about getting these sorted however I'm a bit short on time and honestly don't really wanna go to much effort.

The interior has lasted the test of time quite well with only a small bubble in the dash. Overall everything is in pretty much good condition which the exception of the steering wheel and gear knob which I replaced. The old dash cluster globes were pretty dim and one failed so I replaced them with blue reds I bought of SAU a while back.

The car is located in Happy Valley for anyone interested in having a look. I can be contacted via SMS or PM during work hours otherwise feel free to call any other reasonable time on 0438885649

As for price I'm asking 12k ONO and am not really interested in trades but if you're willing to trade a decent amount of cash I might be interested if it takes my fancy. I'm in no real rush here to sell the car but it would be nice to move it on for the right offer before I start spending more on fixing it up.

List of mods:

RB25 DET using RB20 actuator (10PSI) from JIS with under 100k on and new timing belt

FMIC

K&N pod

Turbo back exhaust with split front and highflow cat

Splitfire coilpacks

Bilstein shocks with king springs (as per Sydneykid group buy)

Whiteline sawybars front and rear

HICAS removed with lockbar

ISC Alum radiator with silicon hoses

Exedy HD clutch

Bendix ultimate pads

MOMO Race steeringwheel

Nismo leather knob

Apexi EL boost gauge

Replaced gear and handbrake boot

Alpine MP3 headunit

Soundstream splits and amp

Sub out of a Krix HT sub (yay for contacts)

Dynamat in front doors

Darkest legal tint

Alarm and imob however alarm siren died :cool:

Plenty of receipts which make me cry and I'm sure I've missed some thing. Got a few spares in the shed for any potential owner.

I will be uploading some more pics tonight and if there is anything in particular you'd like to see feel free to contact me.

Here's some pics I have on my work PC however I have sold the Drifteks so It will just be on the stock 16 like below:

16052009177-1.jpg

385839602_l.jpg

Link to comment
https://www.sau.com.au/forums/topic/292580-r32-gtst-with-rb25-sa/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...