Jump to content
SAU Community

Recommended Posts

Hey guys, what are your thoughts on this;

I jumped in my car this morning to take the short drive to work and right away noticed once I was half way down the street that while in drive the car wasn't changing out of first. Weird I thought, so I popped it to trippy and tried paddle shift with no joy. It was the weirdest thing, my little display would change as I hit them (only up to 4, weirder) but for some reason gears weren't changing. I pulled over put it into park, I could put it into reverse, feel it go into 1st but while I was driving it's like there wasn't 2nd there at all. So there I am getting late for work trying to drive slowly and not rev the shit out of it and all of a sudden after i'd put it up to neutral and back, it was finding gears again. I was 5 minutes from work and not wanting to jinx it I didn't put it over to see if I could cycle all the gears again.

Then work sucked.

Back in the car 11 hours later and the same problem. Almost the same distance of babying it, trying to cycle gear modes for the miracle fix and it happened only in manual. This gave a bit more light that even though the gears were changing, I knew it wasn't going into 8th and could see it see didn't act as if 8th gear was there.

Help :) What on earth is the problem with my new car? I've had it (2002 GT-8) for less than a month. Any ideas?

Edited by NSShaolin
Link to comment
https://www.sau.com.au/forums/topic/292826-gearing-up-issue/
Share on other sites

oh my, have the car's special trans fluid been changed? the fluid cost about $1k excl labour,

and if that doesn't work, wish u luck cos a new cvt-8 trans will cost probably over $15k.

probably the cost of your car in the 1st place :)

when u take it to the dealers, they always recommend a gear oil flush n change 1st....and if that doesnt work then its a new tranny. kinda sucks coz u would have pissed away 1.5k for nothing. Isn't there a viscosity gauge they can use to determine if a trans oil change is required??

Sorry to hear about that man, i feel ya.

How many Ks have your GT-8 done? The tranny fluid change is recommended when you hit 80,000Ks. some even recommend before that.

I've got one too and so far i haven't got any problems with it. Mine's done 35,000.

There are lots of horror stories associated with our car, but i believe if you take good care of it, it's gonna last a long time.

Just a thought, would resetting the ECU perhaps fix it?

Yeah, it sucks a whole lot. Where should I be taking the car in Perth? I mean I feel kinda of ripped of by the dealer, don't feel like trusting him to send it somewhere to be fixed. Even though the whole reason I bought from a dealer is so I'd have something to fall back on, I just want to know its going in good hands for a big job.

I wouldn't have a clue on where to find an Extroid Tranny expert in Perth mate, sorry. But i could recommend a few places that might be able to help you out.

Go and see Jamie in Autoworkshop at Welshpool. http://www.autoworkshop.com.au/ Maybe he can point you to the right direction.

Or go see the fellas at Autoworx : http://www.autoworx.com.au/site/

Hey man, this is the deal, I have a 2005 5sp V35 sedan and the Mrs HAD a 2003 V35 350GT-8.

After only 1 month of ownership, the tranny played up in the 350GT-8, much the same as you described with yours.

We bought it in Sydney so under the statutory 3 month warranty, it was transported back there, where it stayed for over 7 months.

In that time they f*#ked around trying to fix it, as their so called 'mechanics' in house hadn't actually worked on that transmission before, and were unwilling to pay to get a real expert in.

We would get an email saying, 'yeah, new parts in transmission, its back in car, just being tested now, be ready in a few days', but then it wasn't. This happened 6 times.

We were basically letting them do a lot of trial and error, so obviously we had zero trust in these jokers from then on.

After almost 7 months they admitted defeat and just bought a second hand transmission replacement, which I thought they should have done pretty much from the start instead of making us wait so damn long.

I suppose its possible, but don't expect them to give you a replacement car while yours is being fixed either, so if its all you have, then you're up the creek.

Whats my point? Just giving you a heads up on what you may have to deal with.

At the end of it all when it was finally returned, we got our own back by selling it to a, no doubt, scumbag used car dealership without us losing any money on the deal, and hopefully in a few months it will break on them.

PS. the Mrs went and bought a new G6 Ford instead, but I'm still flying the flag for Nissan, haha.

mate, if it is your g/box...and I'm hoping for you that it isnt then there's not many places in Perth that would specialise in the Extroid CVT

which leave's the option of salvage yards or http://www.cvt.co.nz/

also ask around if its possible to swap a normal 5sp auto in?

Sorry to hear mate, last thing you want when 1 month into a new car is issues like that.....you may want to check your warranty though. If you are still covered by the dealer, then you may have to take it to them for warranty claims. If you go somewhere else and find out its a big job, you may be up for the cost yourself. Good luck, hope its not too much of a problem for you.

I can see my future, and it looks a lot like what GoldV35 went through. These dealer might sell a lot of the skylines but their own workshop feels more like a backyard chopshop than a real garage. I had to take it to them for the warranty but the customer service I keep getting is bullshit.

I watched their guy plug in the car to identify the problem, which it did come up with. He showed me it said transmission problem but didn't specify so he reckons he'll be taking it apart to find out if he can find the problem. I have serious doubts. On top of that he outright told me it would take him ages… when he gets to it.

To say I'm pissed off doesn't sum it up.

The good news is that I jumped up and down long enough that one guy came to the party and got his mystery 'boss' to put $30 a day toward a rental car.

We'll see how it plays out, until then I'll be rocking out in the coolest 3 door getz around…. :)

Edited by NSShaolin
I can see my future, and it looks a lot like what GoldV35 went through. These dealer might sell a lot of the skylines but their own workshop feels more like a backyard chopshop than a real garage. I had to take it to them for the warranty but the customer service I keep getting is bullshit.

I watched their guy plug in the car to identify the problem, which it did come up with. He showed me it said transmission problem but didn't specify so he reckons he'll be taking it apart to find out if he can find the problem. I have serious doubts. On top of that he outright told me it would take him ages… when he gets to it.

To say I'm pissed off doesn't sum it up.

The good news is that I jumped up and down long enough that one guy came to the party and got his mystery 'boss' to put $30 a day toward a rental car.

[/size]

We'll see how it plays out, until then I'll be rocking out in the coolest 3 door getz around…. :)

yeah man, I knew they would be a joke to deal with.

Are you under warranty still?

If so, they have to fix it, so don't take it anywhere else or you will have to pay, unless they approve of beforehand which won't happen.

Yeah mate, warranty is still good, paid for an AWN top cover for 3 years too. Down side is it has to go through the dealer, which is useless. I'm hoping to find out more tomorrow. I would love to know about anyother cases along the same lines.

Sorry to hear about ur issues with the CVT8. There has been plenty of warnings discussed/debated over the risks of purchasing a CVT8 in this forum.

You are lucky your are still covered under warranty. Some may debate the usefulness of warranties but I personally have had a good experience with them with one of my imports years ago. (Engine blew within a week of purchase, was replaced promptly by the dealer under warranty).

Make sure you excercise your right to this warranty to the fullest (repair/replace tranny). Once thats done get rid of it!

Hope all ends well.

Ok, the good news is it's all fixed… somehow.

The story goes, from the mechanic, that he notice a second error regarding a break switch. Something along the lines of the circuit has four point and 2 are complete even when the breaks aren't on and that's where an error was starting. Once he had fixed that the other problem has totally gone.

Which it has…somehow. His explanation was he thinks that when the car thinks the breaks are on it detunes in a way, like it is sensing a slip… somehow.

The best part at least is that we have sorted it about and it's running like a dream again. I guess I went though all those worse case feelings for nothing but it evens out because we have the car back. Even if they used almost half a tank of fuel testing it over 3 days.

Edited by NSShaolin

Glad you got it sorted out and for your sake I hope the dealer has been truthful with you with regards to the problem and not just applying a band aid fix on it.

Sorry if I sound like a pessimist but u may want to consider getting rid of it while u still have a working CVT box. I only say that because I don't want to be the one who posts "I told you so" 6 to 12 mths down the track.

DOn't get me wrong, I have nothing against CVTs as I just sold one of my V35s and am now driving a Merc with CVT and loving it. Its the lack of support and extreme costs to repair & service in your case with the CVT8 that turns me off completely.

If you are looking for the CVT oil, do a search, been discussed many times and costs as well...hope you have deep pockets though.

Yeah, I'm doing my reading on what's been said about it before. I cross examined the dealers about the issues to make sure of just that. I don't have any issues with the mechanic that worked on the car, just everyone else I'd had to deal with.

I'm not sure you mind sounding like a pessimist or telling me I told you so lol. At the end of the day, I think it would be a bit of a knee jerk reaction to off sell it when it suits the family, is very nice and we have a top AWN warranty covering it too. I know by acknowledging it means I'm even more open the the 'I told you so's

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
×
×
  • Create New...