Jump to content
SAU Community

Recommended Posts

tein coil overs 1000 exchange

titanium cat back exhaust 1000

nismo 320 speedo 500 exchange

volk TE37 with potenza REo1 80% tread 3000 exchange anything

apexi wastegate 500

copper core radiator

apexi RX6 turbo 550 hp 1500 like new

twin high mount manifold 500

Rb 26 cam covers 400

RB 26 throttle boddies 300

titanium straight cat replace 150

mines highflow cat needs repair 200

post-49143-1256122363_thumb.jpg

post-49143-1256123342_thumb.jpg

post-49143-1256123612_thumb.jpg

post-49143-1256123794_thumb.jpg

post-49143-1256123894_thumb.jpg

post-49143-1256123916_thumb.jpg

post-49143-1256124013_thumb.jpg

Edited by 555kkk

hey man iv got a set of bronze work xd9s 18x10 +18 with brand new ferdaral tyres if you keen on a trade for the te37s??

what sizes are they

X2 and will you ship it interstate?

i will ship at your cost - its 90mm so close enough to 4inch

crawled under car and cant see a label must be on top. but the welds on the lobster backing are awesome it is top shelf for sure ! checkout the photos

post-49143-1256291645_thumb.jpg

Edited by 555kkk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Great to hear you are bringing it out of the shed again. Unless you have specific issues I'd just add the wideband, get a good tune and enjoy it. Certainly no point changing coils etc if they are working. If would add fuel pressure and e85 sensor if you are doing a general update but not if it runs OK and you are just getting it back on track. The other thing is smaller, modern twins, -5 are OK for motorsport but pretty laggy and old tech for street use (of course, if performance is the priority a modern single with twin scroll manifold etc is the go but not cheap). The final thing worth considering is switching to an ethrottle if drivability is still an issue, it should make things a lot simpler and smoother
    • Yeah pretty sure they are m4, but best to check, and perhaps use new hardware Also don't over torque them......there was that one time I lost an expensive engine after a workshop overtorqued one of those bolts and it ended up in the oil pump (no, I don't know why they removed the intake mesh either)
    • I might have to shoot them an email. Pity the exchange rate is so bad at the moment. BTW, thanks for posting that table makes interesting reading. 
    • Add these Sensors -Wideband, Oil Pressure, Fuel pressure, Intake air temp Good inspection of ignition system of coils, plugs and loom (12v feed and good ground)- a r35 kit is best bang for buck upgrade. A decent tuner should be able to see any issues with the trigger system- a link has good filtering but a good simple upgrade is the nz wiring bolt in kit. Check and replace all the fuel filters- you would be surprised at intank filter after a few years. Also good to check for any leaks on vac hoses and pipe work as has been said. No need to go overboard and spend big $$$ to enjoy the car. A quality tuner is getting harder to find as anyone with a laptop thinks they are a tuner. A link has great features to check sensor voltages and frequency inputs and easy to see live by pressing f12. The link can do a TPS & RPM fuel/ignition mapping on ITB cars then add a 4D table with MAP and ability to add a 5D to it (can help with economy at cruise with wheel speed vs TPS) Where are you located as that will help narrow down a good tuner ?
    • Reviving an old thread, I reckon my stagea is starting to slip. Car usually gets parked on a hill, narrow driveway so cant go up the driveway smoothly, anyhows, lately first gear feels "sluggish"? Not responsive. Feels like I gotta run the engine more than usual to get off the line...  Any recommendations for transmission servicing in Sydney? Or possibly just an excuse to go manual ?
×
×
  • Create New...