Jump to content
SAU Community

Recommended Posts

98RON would be the best thing you can put in it. I used Shell V-Power for a year, then switched to BP Ultimate when I had the conversion and dyno tune done. Both are good in my experience, never had any issues.

shouldnt be any differences.

some people mention that one is better than the other, put either or in your car, as long as your not getting any pinging, then i wouldnt worry about which brand of fuel you get, just as long as it's 98ron at a minimum

Edited by BstewyR33

Is the tune stock ?

If so the 95 from any will be fine (it is cleaner and has less shit in it than 91)

If the car has been tuned to run 98 (no cars run a standard 98 tune other than after 2003) then you need to stick with 98, or the thing will ping like shit (detonation) and end up hurting the engine.

In my book 98 is the cleanest, best option - even if the car hasn't been specifically tuned to run on it the engine management will make good use of it after a while.

Prior to entering the turbo scene i ran a modified LS1 (making 360kw RW) in a VY 1 tonner as an everyday work and play.

It had all the frills and was given a birthday (with the upgrades) at around 80,000klms - and up to that point had run on 91. When the heads came off the engine was that full of crap (carbon) and the injection system/inlet manifold was full of pasty, nasty shit that would amaze most.

After the rebuild (with dart heads, 10.8 to one comp and stout camshaft) with a new engine management system the ute ran only 98 and was pulled down at 260,000 klms for a tidy up pre-sale. The heads, injection and manifold were as clean as - and the thing had seen a lot of shitty conditions running between Brissy and the Bowen Basin around the coalfields in NQ.

fuels aint fuels! - you get what you pay for!

Edited by Outrun

I've always used 98RON predominantly BP but with BP servo's diminishing I'm now having to switch over the Mobil's Synergy 8000 or Freedom's E10 Hi Octane 98 as both servo's are on my commute to work.

Just got 645K's out of my first tank of 8000. Was getting roughly 620-630 with Ultimate.

Am interested to see how Freedom's fuel goes.

I've always used 98RON predominantly BP but with BP servo's diminishing I'm now having to switch over the Mobil's Synergy 8000 or Freedom's E10 Hi Octane 98 as both servo's are on my commute to work.

Just got 645K's out of my first tank of 8000. Was getting roughly 620-630 with Ultimate.

Am interested to see how Freedom's fuel goes.

645k per tank is awesome! im running BP ultimate and im getting bout 250-275 kms per tank...WTF?! :(

When i first got my line i thought yea it will use 91 as every other car normally does. My car ran like absolute shit. would ping its head off had no power and misfired like crazy. so straight back to the servo to fil up with 98 and has beenn runing like a dream ever since.

For a non-turbo R34 (I'd imagine for all other non-turbo R31, 32, 33 would be the same).

You only need 93 RON (shown in the original owners manual and written on the fuel cap) - so 95 should be ok if you are on a budget or if 98 is not available.

However...

I did notice with 95 I still got pinging, some power flat spots in the lower rev range and the car tended to drink more. I've soley used 98 with no problems. You will still get very slight pinging every now and then on long uphills.

I recommend spending the few extra dollars on fuel as opposed to thousands of dollars and inconvenience of engine damage.

I wouldn't dare use 91 inless you are really stuck and have no other fuel available - Only use it for "limping" home/next servo that has premium.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Surely the merged entity will be called "Honda" given the relative company values. I've got to be honest, I don't understand how merging 2 companies that missed EVs (despite Nissan making the first mass produced one) will solve their problems
    • If you haven't bought the ECU yet, I would strongly consider buying a modern ECU. Yes it is very easy to setup and tune, however it is lacking many of the features of a modern ECU. The pro plug in is something like 10 or 12 years old now? Can't remember exactly but it is very dated now. In that time the Elite was released and now we have the Nexus platform.  I would strongly consider not buying the ECU that is 3 generations old now (especially as it isn't a cheap ECU!). 
    • Im happy for it as long as it means reanult gets the boot 
    • Sorry I should have been more clear with the previous post.  The block is a sanding block - picture something like this https://motorguard.com/product/motor-guard-bgr161-bgr16-1-rigid-psa-sanding-block-2-5-8-x-16/ The guide coat is the paint It's two separate things I was talking about, there is no "block guide coat". 
    • Maybe more accurately, you aren't just dulling the existing paint, you are giving the new paint something to 'grab on to'. By sanding the existing paint, you're creating a bunch of pores for the new paint to hook on to.  You can lay new paint over existing paint without sanding it, might last a year or two then sad times. The paint will peal/flake off in huge chunks. By sanding it, the new paint is able to hang onto it and won't flake off.  Depends on the primer you are using. When you buy your paint, as the paint supplier what grit of sand paper to use before you lay down the primer.  Use whatever you like as a guide coat. Pick a colour that really stands out in contrast to the paint. So say your sanding/painting a currently white car, using a black guide coat would work well. You very lightly lay the black guide coat down, then as you sand the car with the large block, all the high spots and low spots will stand out as the black paint is sanded off (or isn't sanded off).  When you buy your paint, hit up your supplier for recommendations for what paint to use for a guide coat if you're unsure what would work well with your setup. 
×
×
  • Create New...