Jump to content
SAU Community

Recommended Posts

Ok i found a DIY for this else ware on wiki awnsers and thought id bring it here but with pics and a video :devil:

Here is the original place i found the info Clicky

The problem is/was a knocking noise that happens 3 times when turning the wheel to the left or right, then the noise happens again as you turn back.

It isnt a hard fix or it isnt very technical, only tools you will need is a Screw driver not too sure on what size (grabed a random one that was lying around) and a T50 torx tamperproof bit (bought mine at repco $20 for the whole set, dont need the whole set for this tho)

The weight that causes the problem is ment to be to counter balance road vibrations ( i dont really see the difference)

Video of the problem

If you stuff this up in any way its your own fault.

How To Fix It

1. Disconnect battery

2. Take out the Airbag Fuse

Ive already taken it out in this photo, its a 10A red one.

3. Remove the cover just behind the steering wheel, has 5 screws. Pull the steering wheel adjuster down so you have more freedom.

4. Disconnect airbag wire, big brown one covered in foam (i removed most the the cables just to make sure)

5. Pop off 2 plastic covers on the side of the steering wheel and you will find the bolts (one on each side).

Undo them using the T50 bit, quite hard to remove (i even bent the inside bit of one of the bolts)

6. Once you have taken the two bolts off the middle part of the steering wheel will be loose and can be taken out. Their is 1 cable that will still be connected to the airbag so unplug it and take the whole thing out.

7. The problem will be there right in front of you, its the little bit of metal that's sitting in carrier.

Problem was that the little plastic bits that hold the piece of metal inplace where broken (3 out of 4) so it would just move around and make noise.

8. RIP THAT PIECE OF CRAP OUT!

9. Start to reassemble everything, put the airbag back in place and put in the T05 bolts and put the covers back on.

10. Reconnect the wires.

11. Put the cover back on behind the steering wheel, screws and all.

12. Place the airbag fuse back in.

13. Reconnect the battery

14. Start her up the noise should be a distant memory, the airbag light should come on then go off like normal.

DONE!

Link to comment
https://www.sau.com.au/forums/topic/293221-wheel-knocking-metalic-noise-r33/
Share on other sites

  • 4 months later...
  • 2 weeks later...
  • 5 years later...

Legend! Really easy to do!

Make sure you buy the TAMPERPROOF torx bits with the hole in the top.... Don't be like this idiot (me) and grab the first one that sais torx bit, otherwise it's back to bunnings hahaha

Thanks again.

  • 6 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
    • You're probably right about that one. Thanks for your suggestions, I hope I don't need a new 3rd brake light. Although wiring issues might arguably be worse. Right now I'm in the midst of a turbo removal because of my oil leak, other problems are going to have to wait for now.
    • Hell, I know that much. So far I just put it off as "part of the deal".
×
×
  • Create New...