Jump to content
SAU Community

Recommended Posts

Hey guys,

I was recommended two different sizes for my wheel. I have 9.5x18 Advan TCIIs on the front of my car and I was recommended both 225/40 AND 275/35 for the Kumho KU36.

Normally it wouldn't phase me and I'd trust either of their opinions, but 225 to 275 is quite extreme.

How exactly do you work out what is best?

Cheers,

Kieran.

Link to comment
https://www.sau.com.au/forums/topic/293321-tyre-size/
Share on other sites

Im looking into this myself. Have you test fitted the wheel? Because my fronts are 8.5x18's with 245/40's on now and the upper control arm sits on the wheel so Im getting 225/40's so they clear it. 9.5 will be wider so you'll have to watch out for clearance on the upper control arm and the guards.

Im putting 9.5x18's onto the rear and getting 245/40 tyres on. It will be a stretch fit so it clears the guards but will lessen the protection for the rims. The rims came with 275/40 and they kind of bulge over the rim but from what I can gather from what Ive read up 245/40 is an optimum size and 275 causes too much side wall flex.

Dont know if this helps but just a bit of info Ive found so far :happy:

Link to comment
https://www.sau.com.au/forums/topic/293321-tyre-size/#findComment-4898052
Share on other sites

here's the recommended fitments.

http://www.kumhousa.com/Tire_SizeChart.asp...67-2bea0466bd5c

FWIW I ran 245/40 on 18*8.5 fronts and 275/35 on 18*9.5 rears on my Supra. I was going for track performance as much as possible from them. They sat nice and square on the rims. If you want the stretch look, that's a different thing, but this will give you an idea of how they looked on the rims

DSCF0827.jpg

Link to comment
https://www.sau.com.au/forums/topic/293321-tyre-size/#findComment-4902361
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You ask for things. You specifically state you want responsiveness. A link was provided for a far superior, more responsive option. Find a MX5 workshop that will install it for you. Maybe MX5 Mania will throw on the Fab9 kit. It seems they want to charge almost 14K installed for their kit, so if they charge you $6K to install the FAB9 kit then you'll be ahead? Though really, the 2.5 with a 2860 running low boost will more or less feel as good as anything else. It's a lot of displacement and a small turbo. Think of a more modern RB26 with one stock turbo :p TBH, truth be told I've been driving my own car, and use about 50% throttle at most for 99.9% of the time. Mr Bogan is likely similar so this is all going to be semantics for the use case he actually has. (He'll be happy with anything relative to now) However, the EFR is hands down far superior in this use case. You really, really, really, really do notice it over the Garrett or equivalent.  
    • You are correct, the earlier the torque, the earlier things snap
    • Gents, it will be getting the MX5 Mania kit and the 2.5 will be staying where it is My query was about the 0.64 or the 0.86, whilst the 0.64 might spool a bit faster, would the 0.86 be better IRT EGT and mechanical sympathy, with only a small difference in spool And as I assume I won't need alot of boost to get to 200kw, probably around 10 psi, and with max rpm at 6500, would high EGT even really be a issue with a 0.64 I'm heading into MX5 Mania at the end of Jan to discuss the install, so any info is welcome prior to that Basically have a chat and book a time so they can throw on the turbo kit, and fit a oil cooler with a thermostat, drive in drive out of course  In other news: just finished cleaning the car inside and out, it's now all ready to get covered in bugs and dirt driving to Goulburn tomorrow to lunch,  and go for a stroll along woolondilly River with the daughter and her boy, and of course, visit my grandcats and my new grandpuppy 
    • Sounds like it has an actual problem with mode select doors, or something.
    • Hope your all having a mean Xmas! If anyone happens to know any trick to using the insanely complex climate control system, I cannot get it to not be on dual zone no matter how many times I deselect it (will say it's not but both vents blow different temps). Also one side is always hot, one always cold 🤷
×
×
  • Create New...