Jump to content
SAU Community

Victorian Bridge Clearances- Confused And Need Halp


Recommended Posts

Yes...

NO

3.3 means that the bridge is 3.3 metres at its lowest point.

BUT i have taken a 4.0 truck under a 4.0 bridge, its at your own risk and if it all goes wrong then it REALLY REALLY goes wrong.

http://www.vicroads.vic.gov.au/NR/rdonlyre...0/tr1999024.pdf

There we go - should have checked vicroads first ;)

I will assume that you are saying that you should have checked vic roads first and your not having a go at me.

post-27276-1256481575_thumb.jpg

Edited by W0rp3D

Gee you are one defensive boy lately ;)

Either way i would be highly surprise if a bridge that says 3.3M clearance, actually is 3.3

It would likely be 3.4/3.5 to account for the idiot factor, because lets face it, there are plenty of morons out there.

Or worse case, just drop the tyre pressures down.

Gee you are one defensive boy lately ;)

I have noticed that, maybe its my time of month :P

Either way i would be highly surprise if a bridge that says 3.3M clearance, actually is 3.3

It would likely be 3.4/3.5 to account for the idiot factor, because lets face it, there are plenty of morons out there.

Or worse case, just drop the tyre pressures down.

No doubt the bridges are not quite as low as they say and no doubt the truck is also not quite as high either (especially if it is a rental, they probably say its higher to account for the idiot factor) but for the odd occasion that the two are right i would rather spend the 5 minutes going the long way round.

unsure if its unladen, asking a question for the old man.

thanks for the replies guys, guess we'll play it safe and go around

Just curious how big is the truck your trying to get under it?

EDIT: Oops didn't notice where you said "3.3H"

For the record, we have just built a pedestrian bridge over the King's way on-ramp from Whiteman Street, near Crown. The clearance indicated on the sign is less than the actual clearance for obvious reasons.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well.... it's not just "de-oxygenating". If you do that you just have, most likely, ethane. So you still need to do a synthesis step to combine a number of ethanes/ethanols to make circa-8-chain hydrocarbons. And of course you don't want straight chain HCs, because n-octane actually has a negative octane rating (ie, it's worse even than the n-heptane which sets the zero on the octane scale!), so you have to do some tricky catalytic chemistry to synthesise branched HCs. That's all doable - but it doesn't come for free. And.... it starts with ethanol, which is an agricultural product, and there will almost certainly never be enough of that as a base stock to replace the liquid fuels that are in use. You really wouldn't want to be planning to be using any more ethanol for fuels than is currently already used (in E10, E85s, etc). And ideally you'd be looking to reduce such usage, as it is largely wasteful, particularly in the stupid-ole'US-of-A where the corn lobby has organised it so that it's actually primary production corn that is used to make a lot of the ethanol, not by-products and waste, like it is (mostly) elsewhere. So, what I said about needing free-ish energy probably still applies. True synth fuels would be made from H2 and CO2, in a near reversal of the combustion process. In fact, given that the H2 would be split from water first, it actually is a complete reversal of the combustion process. But...energy intensive. The human race burns something like 1 cubic MILE of crude oil, after it has been made into various fuels. Every year. That's a simply stupendous amount of energy. Just assume that the density is 900 kg/m3, and that the calorific value is 45 MJ/kg, then that is 165.9 x10^12 MJ of energy. Or more than 10^19 Joules. You get a maximum of 1 kJ/s per square meter solar radiation falling on the planet's surface, and so if you halve that for daylight, and halve it again for average weather (highly optimistic) and then take ~25% for the very best efficiency of solar panels, then you need about 85.7 billion square metres of solar panels to generate enough electricity to replace that liquid fuel energy consumption. Each panel is about 1m2. That's a rather large number of panels. We also burn about a cubic mile of coal. We also use hydroelectric power. We also use nuclear. We also use a number of other sources, both "renewable" and not. You can kind of ignore the renewable ones (except for hydro, because it will all end up getting subsumed into pumped hydro for storing other renewables, and so it won't be the standalone renewable that it originally was), so we end up needing a multiple of the ground area number that I just arrived at.
    • Corvette thread then? Don't say I didn't predict the future again. "I love the little MX5, I do, but I just want something a little easier to get in/out of, a little more cushy and some power would be nice - I miss the V8 Rumble... I found this clean red C5 for sale recently and..." I'll do you a great deal on the next step, which is one of those but you can fit people in it, too.
    • What about renewable diesel and/or gasoline? I see some projects spinning up like de-oxygenating ethanol to make drop-in compatible bio-gasoline especially in CA. I still think the future is EVs and we should've all gone full throttle on nuclear power after the 1973 oil crisis like France. Despite 15 years of work in CA to reduce the CO2 intensity of generation with renewables our electric grid is still far worse than even "low carbon" nuclear power. ICE is pretty cool when you aren't depending on the stupid thing to be practical and reliable and cheap as possible to get you to work every day. It's kind of like mechanical watches or vacuum tube amps.
    • I just rolled over "my" first 10k km in the MX5 Every time I go anywhere it always ends up in a adventure to look at houses and find some random country roads I've been on leave since early November but unfortunately need to go back to work on 19 January Luckily though I still have a fair chunk of leave left to burn until.... Not that I'm counting 😁
    • These look like S13 wheels.  And Welcome! 
×
×
  • Create New...