Jump to content
SAU Community

Recommended Posts

So yesterday I was picking my little sister up from work and on the trip home this cattle dog chases a plover right in front of me... Next thing I know I have collected a sign post and am surrounded in dust. Thank f**k we weren't injured at all!!

So now I am looking to get my baby repaired, but before I take it to a body work shop I would just like to ask you guys what you suspect is wrong (apart from panel damage) and what I should be looking at price wise for the repairs. Just ball park as I know each shop is different.

So here are some pictures and as you can see I collected the sign post right in line with the drivers side rear wheel. The wheel has moved in at the base, which the tow truck driver suggested is from the control arm being damaged. I drove the car up the driveway at home and didn't notice any obvious bumps and jumps as if the axle had been damaged though, but then again I am not mechanically minded so I wouldn't really know...

Any help would be appreciated.

Chris

post-61364-1256510876_thumb.jpg post-61364-1256510935_thumb.jpg post-61364-1256510987_thumb.jpg post-61364-1256511051_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/293537-crashed-my-car-yesterday/
Share on other sites

Looking at that control arm I would definitely be asking them to look at your subframe/chassis alignment mate. Its taken quite a hit there.

Noone here can give you even rough pricing unless they are involved in the accident repair bus. Take it to a couple of reputable repair shops and compare their notes.

Camerons bodyworks at Coopers Plains always seem to get a mention around here as being upfront and of a good standard when it comes to skylines.

I've had no first hand experience with them but it may be a good place to start.

Thanks for the input FineLine. Sounds like a good option but unfortunately I am up Townsville, probably should have mentioned that before sorry.

As for your suggestion that I could have subframe/chassis alignment issues, how complicated is repair in the worst case? Need to source replacement, or can these type of things be reworked??

  chrisR34GTT said:
Thanks for the input FineLine. Sounds like a good option but unfortunately I am up Townsville, probably should have mentioned that before sorry.

As for your suggestion that I could have subframe/chassis alignment issues, how complicated is repair in the worst case? Need to source replacement, or can these type of things be reworked??

Any body shop worth their salt will have chassis equipment mate. have a look around.

Looks ok. Just chuck in a arm and see what its like or You can just replace it with an adjustable lower arm off ebay and it does not matter if their is a alignment problem as you can adjust it out. Had the same damage on my old r32 and thats what I did

Thanks for the suggestion Brokenz. I just need to be as informed as I can be when I approach body shops and these inputs, solutions will help me heaps when I quiz the mechanics. So I will get some feedback from a few shops about the drivetrain (right word?? chassis) issue.

Can any panel beaters out there provide an estimate for a full rear quarter panel fix and respray?

... LOL would I have swerved if it wasn't on the road?? Now that I think of it, would it have been better to have hit the damn thing??

Ok so the old man knows a mobile mechanic at Cannington that is going to take a look at it on Saturday. So should I get hold of a control arm (found one for $225 delivered, is that reasonable?) so he has it on hand?

  chrisR34GTT said:
... LOL would I have swerved if it wasn't on the road?? Now that I think of it, would it have been better to have hit the damn thing??

Ok so the old man knows a mobile mechanic at Cannington that is going to take a look at it on Saturday. So should I get hold of a control arm (found one for $225 delivered, is that reasonable?) so he has it on hand?

Better for you, but I'd take all necessary safe steps to miss someones dog personally. But then I'd also attempt to capture the dog or at least burn an image into my mind so the owner can pay.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...