Jump to content
SAU Community

Recommended Posts

Hi all, selling on behalf of a mate.

Shoot me a PM if you have any questions.

Details below:

1993 R32 GTS-t type M coupe

RB20DET

5 speed manual

Gun metal grey

139xxx kms

Recently serviced with Motul Turbolight 4100

New clutch master also fitted

New rear tyres

Timing belt done @ 107xxx kms

Suspension/braking-

- Tanabi sus-tec pro front coilovers (Adjustable height, damper, body etc)

- JIC magic rear coilovers (Adjustable height, damper, body etc)

- Adjustable rose-jointed castor rods (Set to about 8 degree castor)

- Front and Rear whiteline thickened sway bars

- ZENITH Solid alloy rear cradle bushes

- ZENITH Solid alloy steering rack bush

- Large GTR type front strut brace

- R33 Lower control arms for more track and camber (Camber currently set to about -3 degree front)

- Factory Type-M Brakes

- Braided brake lines

- Lucas full-metal brake pads (near new)

Power/drive line-

- Boost controller (Currently set to about 11-12 psi)

- Hyrbrid 600x300x75mm Front mount inter cooler

- Full 3 inch exhaust with front pipe/dump pipe

- Re-mapped ECU by Sam Cornell

- Larger Walbro fuel pump

- Heavy Duty Daikin clutch (Feels perfect, not rough like a button clutch, and has never slipped)

- Metal 'hot pipe' by Exhaust tech (Metal pipe inside the rubber induction pipe to prevent it collapsing under boost)

- Greddy Blow Off Valve plum backed into system (legal)

- Pod filter

Cosmetic-

- GTR body kit, side skirts, wing and front bar

- Pumped fiberglass front guards

- Pumped and rolled rear metal guards

- 18 inch G-max dished rims 8.5" front, 9.5" rear (Unsure of exact offset)

- Tinted windows

Interior/General-

- 360mm Black NARDI Steering wheel

- HKS pillar mounted boost guage

- C's Short shifter

- White vision H4 XENON headlights

- Cyclops Car Alarm and immobiliser (Key less entry, central locking etc)

- Pioneer CD player

Minor problems-

- Crack on drivers side of front bar, toward the ground

- Passenger side power window sometimes only works from divers side controls (Passenger cannot always put it up and down from their side)

Located near Modbury

$12,000 ONO

Couple of pics:

6468025.jpg

6468030.jpg

6468010.jpg

Link to carsales - http://www.carsales.com.au/all-cars/privat...&__Qpb=true

Edited by A31-RB20

Firstly dont judge me by the associates i am involved with, secondly i hate fords and holdens as much as you do if not more, thirdly i dont go cruising with clubs anymore due to too much attention, i cruise with my close mates who owns imports.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
    • ...oops. forgot the TCU end...
    • No I got mine from a friend that had fabricated one … but I had to fit it to my setup which was a hks turbo setup. His was a Garrett -7. So one of my turbos was not a flange for one side … then I had a leak in the welds I had to find a weld shut … in the end the setup was decent priced but I spent a lot to get it fitted. A couple companies I checked would make it but you’re talking 7-9k aud with titanium. No joke mine was 6-7k even second hand after I had to fit it in Hong Kong … labour is expensive here. 
    • I'd just like to restate that I don't think anyone here is actually hating I recently sold a car part to a guy who was building a forged auto R34, with MV stall and aiming at ~450kw. I told him that I'm him, from the future and to stop after it explodes once. I told him I knew he won't listen the first time, and that's fine. But if my predictions do come true - Change direction faster than I did. I also said it's probably no coincidence that the dyno plot of a reliable turbo engine starts to look a lot like a N/A motor. :p
×
×
  • Create New...