Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Still having troubles? Ok.. just looking at this, few things occur to me.. but i could be completely wrong.

It sounds like you're not actually getting enough pressure to the injectors in the first place, and that sems to be the source. Even stock N/a injectors should be enough to run a little boost. Have you checked the fuel pressure at the rail, and is within range ? May be useful to rig up a pressure tester to the rail and see what you're getting. If you're not getting the required pressure in, the injectors won't be working correctly and hence may reach max cycle prematurely. Also, check your fuel pressure reg? is there any difference between the stock fuel pressure reg, and say the turbo thing. Again, the lack of pressure to the rail thing springs to mind.

Also the other is to check the source of course, and that is the fuel pump itself. Are there differences between the n/a fuel pump and turbo fuel pump in terms of flow? I know on like the GTS R33 there can be a difference.

Lastly, the AFM signal and when its maxing out is a bit of a telling sign. You tried other AFMs? it seems similar to the circumstances reached when you max out a stock GTS-T AFM when you hit the 220rwkw mark (and hence go for a Z32) when it can *appear* the injectors are maxing out .. and with the emanage, i believe you need a separate injector harness to be able to control/dictate the injector pulse rate which will be important in this situation to override the ECU's injector timings.

.. so overall it sounds more like other factors than the injectors at work here.. and it may just be the end result of them maxing out that is the most obvious.

Hope that might be some food for thought, if you haven't already gone through it all (probably have :()

p.s. thanks for the toulene!

The new injectors are in and It's now running VERY rich...so looks like it was just the stock ones not having the balls. My AFM is the turbo one anyway so not a problem...I've also got the injector harness hooked up.

The fuel pump is capable of flowing the pressure, also the fuel rail is up to the job.

The second the 385cc injectors were in, everything seemed to be OK...Thursday will be the final check on the dyno and with A/F ratios.

Dan

A few pics I quickly took, excuse the inch of dirt in the engine bay :D

I can honestly say even driving the car around at less than 3000rpm (to prevent any misadventure until full tune) it would still out perform the standard car revving the balls off it!

  • 4 weeks later...
  • 2 weeks later...

Hello Dan. Very intersested in what you have done as I would like to do exactly the same thing with my R34. Bought it in December and thought I could just whack a turbo on it but told it would be better to do an engine swap. Have you posted outcome of the operation and procedure.

Any info would be greatly appreciated.

  • 2 weeks later...
  • 3 weeks later...
  • 3 months later...

Heya, got on the dyno, but was getting some bad timing retarding happening...waiting for my ignition harness to arrive for the e-manage.....then I can sort out the timing spikes back to something a bit less advanced. Will try and do it in time for the Mercury Motorsport Dyno weekend.'

I'm suprised your insurance was against the idea...my insurance didn't increase at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi soviet_merlin, We appreciate your concern regarding this possibly being some sort of PR/Political hype, I assure you that is not the case, I wish we could claim something like that, but in this case, we merely reached out for comment on the basis of the outrage we too felt, as those heavily in the automotive industry. Ps. the original source in the social media post is CarExpert not CarExplore.    Best, CE.
    • Made a bit of a discovery, but while I was cruising, I randomly decided to test to see if it worked and it showed up on my IC7. The entire time I tested it before, I never thought to turn the ignition on. I only tested it with head lights turned on but with the ignition off. Huge oversight on my end. I’m a dummy. I know. 
    • G'day all, I have drilled and tapped the hole for the relocation of the timing belt tensioner. That was straight forward. I'm unsure if I need to also put another hole for the smaller stud that the spring behind the tensioner catches on (this is how it seems to work in its original spot). Or do you not use the spring behind it and just torque it down? Thanks in advance, I did a search but couldn't find anything related and it doesn't mention it in the rb30det sau guide.
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much 
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much   
×
×
  • Create New...