Jump to content
SAU Community

Recommended Posts

Anyone out there managed to find lock nuts for Volk GTC wheels? I'm having lots of trouble finding a set. I've checked with the usual sponsors and have scanned ebay etc for days with no luck. Surely people out there with GTC's have lock nuts!!??

Link to comment
https://www.sau.com.au/forums/topic/293868-wheel-lock-nutslugs/
Share on other sites

I use McGard lock nut and would recommand them. I got the splinedrive nut + lock nut as they both require the special "key" to undo them. They are available on eBay.

LugCone.jpg

LockTuner_spline.jpg

Locknut

Not sure if they will fit the volk, but here is a thread that seems to confirm they will

http://g35driver.com/forums/wheels-tires/2...c-lug-nuts.html

The only down side is that its better you tighten those by hand since the lock nut will strip (the key part) if rattle gun is being used constantly.

Edited by __PhaseShiftDown

Obtained a whole set of RAYS nuts in a set from Just Jap = 4 lock nuts (& socket) with 16 matching wheel nuts. 'Derrr

Because of its compound (& very light weight), you just need to not exceed 108Nm on torque wrench. Never use a ratchet gun on them either (no matter what setting). This is good to keep in mind should you lay your hands on a used set.

Thanks Terry - I'm trying to avoid the need to buy a set of 20 nuts just for the 4 lock nuts I require - but if I have no luck sourcing the lock nuts on their own, I might need to look at buying the complete set...

  • 4 months later...

Bringing up an old thread i know, but did you end up getting some? Reason i ask i just found a set in one of the boxes to my wheels, fully forgot i had them lol. Let me know if your still chasing them, if not ill chuck them on ebay or something.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...