Jump to content
SAU Community

Recommended Posts

Hey guys

Reeeeall stupid qusetion and i cant find it no where

What is the exact sparking mesurement for the spark plugs (RB20DET)

Iv found n bn told 1.0mm

1.1mm

0.08mm

I had them all at 1.0mm and it was missing as i was coming on boost fairly mild

took them out made them bit smaller roughly 0.9mm and its running a hell of a lot better now top end high revs is missing???

Sooo im thinking its smaller again!

Just so i dont have to take it apart again, What u guys reckon

Cheers

Edited by MYCEF3
Link to comment
https://www.sau.com.au/forums/topic/293895-gapping-point-spark-rb20det/
Share on other sites

Cheers KISIN! Yeah i found that, but the answer that person gave "Ummmmmm i reckon..... roughly 0.08mm" (WOW convincing much)

Which yeah i wanted to ask yous n find out EXACTALLY the messurement

0.8 not .08 sorry typeo!!

and yeh standard for RB25s as well.

Hahah thats what i ment as well!

0.08... That would be a very tight spark :P (haha... tight.... :thumbsup: )

Edited by MYCEF3

With an N/A engine 1.1 is the standard and that is what most plugs are out of the box.

With a force inducted car you get away with what you can but most people will run around the 0.8 mark.

Also be careful with platinum plugs (which i will never use unless i own a car which is a bitch to change plugs) not to touch the electrode as the platinum coating is only a few microns thick and if you push a screw driver in their trying to gap a plug you will ruin it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How old is the battery, it's more likely your battery is on its way out.
    • I reckon you'd get 90% off. My washer doesn't get between spokes very well. Haha! I love my Gerni!  Argh! Steam cleaning has its place for sure.
    • Hey all, I did a voltage test with the car (video attached) not running for 3 days. And here is some interesting stuff: - Battery voltage is 12v (I had the key in the ON position) - Drops to 9.76v while cranking then quickly goes up to 14.5v - You will notice there was a sorta slow start but not as slow as it usually is. - Idle surprisingly was better at just over 1,000rpm instead of 1,100 rpm. - I turned on the A/C, radio and headlights in the video and the voltage remains the same - I haven't cleaned the grounding wires on the chassis yet, that's next. - Battery drops to 12.6v when I turn off the car and wait a bit Seems like I might have a parasitic draw? I do have an immobiliser system which does drain the battery more of course but was wondering if there is anything else I should be looking at fixing? Does the ground wires on the chassis have anything to do with the low 12v?        SAU.avi
    • My lord that is some low oil pressure as minimum in the manual! I guess the big part will be seeing how it changes as the engine gets more spirited use.
    • Turbotapin   so I am about to be mounting mine up been waiting for the body to get finish at paint. I had a question. I was told our Speedo sensor it originally in the transmission but the cd009 is in the diff on the z. How did you get around this? 
×
×
  • Create New...