Jump to content
SAU Community

Recommended Posts

Got some parts lying around that i want to get rid off. Will post the smaller items at your expense but the larger items are pick-up only from Emerald, Victoria.

Electronics:

Apexi Pen Turbo Timer - Perfect condition black in colour - $50

JVC KD-DV4306 Headunit -Perfect condition- comes with remote and wiring loom,can play DVD's and also has a jack to connect I-pod - http://www.oztion.com.au/buy/auction.aspx?itemid=5842381 - $200

Kenwood KAC-6403 500W Amplifier- In new conditon, works perfect - http://www.productreview.com.au/showitem.php?item_id=15950 - $80

R32 GTST 1992 Parts:

Passanger side indicator - Has some scratches on far corner - $40

Climate control unit - Perfect condition - $60

Passenger and drivers side suspension set-up - Includes upper/lower control arms, knuckles/hubs etc - Crossmember sold - $100 each

Swaybar and links - $30

Castor rods - Rubbers in perfect condition - $50 Each

Steering rack - Good condition - $100

Front brakes with RDA slotted rotors - plenty of meat left on both the rotors and pads - $250

Coilovers - Rears are Bilstein and front are KYB Excel - G Gas Shocks - in very good condition, used for roughly 25,000KM. Once fitted they sit just at legal ride height - $300

Boot lid with original GTR Spoiler. Excelent condition, Has been de-badged and re-sprayed previously. Boot lid has 1 small scratch but could be buffed out and 1 small chip on spoiler although is almost un-noticable. - $350

Dash surround including wipers and light controls - Has a small crack in middle of plastic - Controls in perfect condition - $50

Speedo cable - Only used for roughly 5,000km - $50

Rear brakes & rotors - Good condition - Plenty of meat left on pads and rotors - $150

Rear subframe and diff - Good condition - $200

Manual Tailshaft - $100

Passenger and Drivers seats - in average condition - $40 each

AFM - Plastic is broken where bolts mount - Works perfectly - $40

Pics of some of the items can be found here - http://s160.photobucket.com/albums/t177/Shano3000/

Edited by Shano3000

NEW PARTS:

Rear Subframe Including diff/Tailshaft/Rear Brake set-up/all suspension components. Passenger side lower control arm has damage, will need to be replaced. Everything else in good condition. $300

Complete Dash including vents - Dash in good condition apart from 2 small holes next to the instrument cluster where a guage was previously mounted. No bubbles, Passenger side vent is cracked. - $150

Pedal assemblies - good condition - Brake/Clutch/Excelerator - $50 Each

Rear seats - Good condition - $50

Rear seatbelts - Good condition - $40

Fuel tank - Has some scratching on the underside and a minor dent - $50

Damaged R32 Shell - Has damage above rear passenger wheel and drivers side rear quarter panel. Damaged rails. Front end of car is in good condition. $300

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh... literally every time i jump on a forum, see an instagram post or see an engine bay at a car show, i get an idea and add it to my 'to do' list. So what started off as, hey can u just make a couple of intake hard pipes because my dumbass bought the wrong apexi kit, blew out into a 2 week job including braided brake lines & custom bash kit for the front lip haha.  Getting Luke from A4E engineering to make a full custom exhaust with a controllable aes dump valve so i can actually switch between quiet and loud, because right now its just loud all day every day. Then after that go and get the tune redone flex e85 & 98 as i get bugger all milage from e85, makes going for longer drivers difficult
    • Car looks clean as. You ended up getting quite a bit done 馃槀  So what's the plan for the exhaust? 
    • The only Neo rods that were any different to any other RB25 rods were the DET ones, and they were the same as RB26. Here is a Neo DET rod. O5U part number visible. Here is a post in a thread here on SAU with evidence from someone who has done this before. There are photos in the thread of normal RB25 rods.  
    • Sure, but why assume that will be the case forever? And why assume you'll be able to do an oil change to swap back to a stock drain bolt before that happens? And does it even matter when I change the oil at fairly short intervals? Life can be funny sometimes and unexpected things can happen. Like breaking a collarbone so you can't do any work on your car for a few months but the oil change is due so you have to take it to somewhere and hope they don't do something stupid like stacking the new drain plug washer on top of the old one.
    • Do u know how to identify the rods are rb25 or neo ones? Can u look into the pics and tell me is they de or de neo ones. Its confusing becoz my motor has de neo head but block is 25de 75t, so really confusing me about rods, crank.
  • Create New...