Jump to content
SAU Community

Recommended Posts

Only 3 Months use and in perfect condition, comes with, Full plug Loom and all connectors, boost control, Map sensor, Engine Map sensor switchers and plug in ECU socket for glove box location, Deletes for Twin Turbo set up, so no air flow meters needed, the Motec is unlocked and cleared and ready to go, I do not wish to separate this upgrade kit at this stage, its not being used so its time to sell, it cost me $4,660 2 years ago.

Selling for $3,900

Melb location, prefer pick up, if interested could you pls PM me or Phone Nick on 0425763096

post-66539-1256712681_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/293931-motec-m800/
Share on other sites

Only 3 Months use and in perfect condition, comes with, Full plug Loom and all connectors, boost control, Map sensor, Engine Map sensor switchers and plug in ECU socket for glove box location, Deletes for Twin Turbo set up, so no air flow meters needed, the Motec is unlocked and cleared and ready to go, I do not wish to separate this upgrade kit at this stage, its not being used so its time to sell, it cost me $4,660 2 years ago.

Selling for $3,900

Melb location, prefer pick up, if interested could you pls PM me or Phone Nick on 0425763096

Item still available.

Link to comment
https://www.sau.com.au/forums/topic/293931-motec-m800/#findComment-4909882
Share on other sites

that loom is direct plug for factory correct?

IF so i have a m800 with a full loom not the patch loom like yours are you intrested in trade or just selling it to me.

The m800 is good for any car at all your limited to just what your loom can plug into :D

I have a 33gtr already have a motec m800 just have not bought the plug and play loom :D

let me know

Link to comment
https://www.sau.com.au/forums/topic/293931-motec-m800/#findComment-4910881
Share on other sites

Only 3 Months use and in perfect condition, comes with, Full plug Loom and all connectors, boost control, Map sensor, Engine Map sensor switchers and plug in ECU socket for glove box location, Deletes for Twin Turbo set up, so no air flow meters needed, the Motec is unlocked and cleared and ready to go, I do not wish to separate this upgrade kit at this stage, its not being used so its time to sell, it cost me $4,660 2 years ago.

Selling for $3,900

Melb location, prefer pick up, if interested could you pls PM me or Phone Nick on 0425763096

Motec M800 is used by High end GTRs the world over, simply flick the switches on this one to change the tune settings, fuel blends, boost, etc, my set up had, Shell100 at 350kw@4, BP98 at 325kw high boost, BP98 at 270kw low boost and valet parking mode, now with E85 fuels, race fuels and so on, its up to you and your imagenation, dont keep getting slugged at the tune shop, do it all in one hit!

New Price $3,600 FIRM.....Great saving!!

Link to comment
https://www.sau.com.au/forums/topic/293931-motec-m800/#findComment-4913005
Share on other sites

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Save yourself the headache of an alarm. Immobilizer on the signal side of the main EFI relays so it won't start is good enough. DIY killswitch is the same thing except instead of a nice passive system you need to remember to switch it on and off.
    • Yeah, the advent of canbus was supposed to cut down on wiring weight, then some bright marketing wonk says "oh, look at all these wonderful tech gadgets we can cram in here now that we have this wonderous technology" and some arsehole safety legislator says "oh, look at all the wonderful surveillance and tracking gadgets we can cram in here now that we have this wonderous technology" and some dipshit young engineer who has grown up thinking that an extra 500000 lines of code is not a problem because storage is cheap these days says "oh look at all this wonderful shit I can do to one up those dipshit arsholes over at VW" and the Karens of the world all go "oh look at all these fancy things I can do on my screen (so long as I am not driving on a bumpy road wherein touch screens immediately become the single most stupid shit idea ever shoveled into a car) and my 19 zone airconditioning keeps my sweaty fat folds a bit less damp and the windows close themselves because I'm too fat and lazy to wind them up for myself and these reversing sensors would have been great if I'd paid attention to them instead of smashing them on the bollard while I was reversing and staring fixedly forward that day I went to pick up little Charlize from ballet" and the sweaty mongoloids who say "oh this wonderful collision avoidance technology with these 45 excellent radar antennae scattered across the front of my car mean I can tailgate like a methed up tradie at full speed with no fear because the car and the 35 airbags will protect me if it all goes wrong" ...... </shallistopranting?>
    • There's a post from a member (can't recall who), went down the path of a twin scroll G30-660 and it's doing over 300kW+ AND comes on about the same as a high flow RB25DET turbo. Have your cake and eat it too in this case. TBH, if I had a 2nd chance of building my car again (i.e. someone gave me what I wanted for my shit box, but the deal was I had to re-build another R33 and keep the change) I would just pop in a stock NEO motor (with new seals, rod bearings, ARP studs, head gasket, sump, Nitto pump), get a smaller twin scroll turbo, modify the stock low mount (keep the divider in place), and make a solid 300kW on 98RON and call it a day. 
    • It's all the sound deadening, and extra shit piled into them, plus all the extra (even though it's thinner) material for crumple zones. I can't fathom in modern cars why they need canbus to the headlights, and why the headlights must be vin coded on some cars to the ECU, BCM, and security module! Especially when they claim it's for security, yet, the canbus at the headlights let's thieves steal the car in minutes, so even more cars are being stolen! The Mercedes Sprinter 907 vans. They're a huge van, but a "basic" van. Yet they have that many canbus networks, plus two Lin networks, AND an Ethernet network. Logging a single network alone of 8 byte data frames, and they will generate a 20mb log file in 5 minutes. That's one network, and I can't remember the exact amount, but there's over 10 full CAN2.0B networks in them. I'm not a fan of modern cars, oddly, more and more I hate DBW, and all the bullshittery the cars try and interfere with. But all that bullshittery adds weight, plus crazy regulations on crumple zones, plus, ever picked a modern seat up, half of them have like 4 electric motors in them and will weigh 30+kg each. Then all the motors for things like adjustable steering columns blah blah blah. And did I mention the sound deadening so you can even hear an ambulance right behind you even if you 7.2surround sound is off?
    • Ah ok, yeah it should be flat, I believe the r34 battery tray has these 3 bumps in them they makes it line up and everything is flat, don't see how it would tilt if everything is secured.
×
×
  • Create New...